No vtec after misfire fix
Thread Starter
Cruisin'
Joined: Sep 2005
Posts: 24
Likes: 6
No vtec after misfire fix
need some help please.
I have a 2003 Acura cl type s 6 speed. It has 206,000 miles and drives great except for the no vtec at the moment. so I had a misfire code come up via the cel. Did some research and checked the gasket on top of the motor to be upside/backwards covering the egr ports. Mind you I had vtec engagement prior to the switch. I did the simple thing and checked the oil first. Now I hope someone could point me in the direction so I can experience vtec again
I have a 2003 Acura cl type s 6 speed. It has 206,000 miles and drives great except for the no vtec at the moment. so I had a misfire code come up via the cel. Did some research and checked the gasket on top of the motor to be upside/backwards covering the egr ports. Mind you I had vtec engagement prior to the switch. I did the simple thing and checked the oil first. Now I hope someone could point me in the direction so I can experience vtec again
pull your clock fuse from passenger fuse panel, let sit for like 10 mins, reinsert, start car and let idle until cooling fans come on. should reset ecu.
that's where i would start at least.
that's where i would start at least.
Thread
Thread Starter
Forum
Replies
Last Post
Deuce7
3G TL Problems & Fixes
12
Apr 27, 2018 11:03 AM
Jason Deglman
2G CL Problems & Fixes
6
Nov 9, 2016 01:12 PM
PITBULL
2G TL Problems & Fixes
6
May 13, 2008 10:04 AM