It's ALIVE!!! =)
#1
Racer
Thread Starter
It's ALIVE!!! =)
Hi all....
The 3.5Liter TL-S is ALIVE!!!
Runs very nice. We have not had a chance to really get on it yet--still a virgin motor--but everything is in and running fine.![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
We will be releasing and have pricing set for this kit by the end of the month......probably sooner, since we are sitting down tomorrow to talk about it.
The one we have just completed is built for forced induction or NO2 duties (or both) and is able to handle just about anything you would want to throw at it. This block is complete with new forged pistons (10.2:1 boost friendly compression ratio), shot peened, magnafluxed and cryo treated stock rods, chamfered oil passages and a completely balanced rotating assembly.
The transmission is in the car as well and working wonderfully. We found a company who's owner was a Honda Mastertech for 8 years before opening his own tranny shop, so he is very familiar with them.
These are stock transmissions that are completely built up to withstand high horsepower inputs and remain 5speed autos. There will be 2 versions of this available--one with a re-worked stock torque converter and one with a high performance aftermarket torque converter. The pricing on these wil be available in the next couple of days too! ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
We will be starting work on the aftercooler very soon.....
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Thanks to everyone--especially Austin519--for your patience.![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Dean Baty
The 3.5Liter TL-S is ALIVE!!!
Runs very nice. We have not had a chance to really get on it yet--still a virgin motor--but everything is in and running fine.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
We will be releasing and have pricing set for this kit by the end of the month......probably sooner, since we are sitting down tomorrow to talk about it.
The one we have just completed is built for forced induction or NO2 duties (or both) and is able to handle just about anything you would want to throw at it. This block is complete with new forged pistons (10.2:1 boost friendly compression ratio), shot peened, magnafluxed and cryo treated stock rods, chamfered oil passages and a completely balanced rotating assembly.
The transmission is in the car as well and working wonderfully. We found a company who's owner was a Honda Mastertech for 8 years before opening his own tranny shop, so he is very familiar with them.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
We will be starting work on the aftercooler very soon.....
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Thanks to everyone--especially Austin519--for your patience.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Dean Baty
#2
teh Senior Instigator
Join Date: Sep 2000
Location: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
Age: 42
Posts: 44,094
Received 976 Likes
on
330 Posts
Re: It's ALIVE!!! =)
Originally posted by DeansblackCLS
Hi all....
The 3.5Liter TL-S is ALIVE!!!
Runs very nice. We have not had a chance to really get on it yet--still a virgin motor--but everything is in and running fine.![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
We will be releasing and have pricing set for this kit by the end of the month......probably sooner, since we are sitting down tomorrow to talk about it.
The one we have just completed is built for forced induction or N20 duties (or both) and is able to handle just about anything you would want to throw at it. This block is complete with new forged pistons (10.2:1 boost friendly compression ratio), shot peened, magnafluxed and cryo treated stock rods, chamfered oil passages and a completely balanced rotating assembly.
The transmission is in the car as well and working wonderfully. We found a company who's owner was a Honda Mastertech for 8 years before opening his own tranny shop, so he is very familiar with them.
These are stock transmissions that are completely built up to withstand high horsepower inputs and remain 5speed autos. There will be 2 versions of this available--one with a re-worked stock torque converter and one with a high performance aftermarket torque converter. The pricing on these wil be available in the next couple of days too! ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
We will be starting work on the aftercooler very soon.....
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Thanks to everyone--especially Austin519--for your patience.![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Dean Baty
Hi all....
The 3.5Liter TL-S is ALIVE!!!
Runs very nice. We have not had a chance to really get on it yet--still a virgin motor--but everything is in and running fine.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
We will be releasing and have pricing set for this kit by the end of the month......probably sooner, since we are sitting down tomorrow to talk about it.
The one we have just completed is built for forced induction or N20 duties (or both) and is able to handle just about anything you would want to throw at it. This block is complete with new forged pistons (10.2:1 boost friendly compression ratio), shot peened, magnafluxed and cryo treated stock rods, chamfered oil passages and a completely balanced rotating assembly.
The transmission is in the car as well and working wonderfully. We found a company who's owner was a Honda Mastertech for 8 years before opening his own tranny shop, so he is very familiar with them.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
We will be starting work on the aftercooler very soon.....
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Thanks to everyone--especially Austin519--for your patience.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Dean Baty
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#3
Senior Moderator
cant wait to see the n/a dyno's.
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
#4
mister D
Join Date: Oct 2001
Location: C A L I F 0 R N I A
Age: 40
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
damn. i wouldnt invest 2500 just for the 3.5L upgrade, but for a built motor. hell yeah. keep us updated on the tranny's too. a t/c maybe be in my future
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Trending Topics
#8
Censored User
Join Date: Mar 2002
Location: Miami - just one day, I would like to drive without getting cut off!
Age: 56
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Congratulations! That's great news for all concerned. But I have one question. Does your engine have to be broken in again now?
#12
mister D
Join Date: Oct 2001
Location: C A L I F 0 R N I A
Age: 40
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by typeR
wow...great work....the trans work has me very intrigued can any additionals like LSD or a change in gear ratio be done?....very interested
wow...great work....the trans work has me very intrigued can any additionals like LSD or a change in gear ratio be done?....very interested
#15
Racer
Thread Starter
mattg,
It will be a little bit until we get the car to the dyno, but give us a little time.![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
kHmER Co,
For a bottom end build up like this one, it will be a bit more than $2500![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
JaDia4,
Yes, the motor is fresh from the machine shop, so a little break in will be necessary.....about 1000 miles or so.
typeR,
Thanks--I will ask tomorrow to see what kind of options there are. We are working on a couple of different angles right now.![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Thanks again to everyone!!!! This has been fun and we are looking forward to offering these to everyone interested.
Dean
It will be a little bit until we get the car to the dyno, but give us a little time.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
kHmER Co,
For a bottom end build up like this one, it will be a bit more than $2500
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
JaDia4,
Yes, the motor is fresh from the machine shop, so a little break in will be necessary.....about 1000 miles or so.
typeR,
Thanks--I will ask tomorrow to see what kind of options there are. We are working on a couple of different angles right now.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Thanks again to everyone!!!! This has been fun and we are looking forward to offering these to everyone interested.
Dean
#16
Racer
Thread Starter
SiGGy,
No....with the MDX block and Type S heads, the static compression is 10.8:1. We lowered it to 10.2:1 to make it happier at higher boost levels and still leave some really nice drivability.
Dean
PS: we had a 300WHP Civic Si at 10PSI----stock motor, compression 10.2:1
No....with the MDX block and Type S heads, the static compression is 10.8:1. We lowered it to 10.2:1 to make it happier at higher boost levels and still leave some really nice drivability.
Dean
PS: we had a 300WHP Civic Si at 10PSI----stock motor, compression 10.2:1
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#18
Censored User
Join Date: Mar 2002
Location: Miami - just one day, I would like to drive without getting cut off!
Age: 56
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Dean,
Just a suggestion, although I'm sure you guys are business folks as well, but maybe you could package a tranny (of choice)and the upgrade together. For a lower price than seperate of course
Just a suggestion, although I'm sure you guys are business folks as well, but maybe you could package a tranny (of choice)and the upgrade together. For a lower price than seperate of course
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#21
Moderator Alumnus
Originally posted by DeansblackCLS
SiGGy,
No....with the MDX block and Type S heads, the static compression is 10.8:1. We lowered it to 10.2:1 to make it happier at higher boost levels and still leave some really nice drivability.
Dean
PS: we had a 300WHP Civic Si at 10PSI----stock motor, compression 10.2:1
SiGGy,
No....with the MDX block and Type S heads, the static compression is 10.8:1. We lowered it to 10.2:1 to make it happier at higher boost levels and still leave some really nice drivability.
Dean
PS: we had a 300WHP Civic Si at 10PSI----stock motor, compression 10.2:1
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
ahh... cool.
Thanks for the explanation.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Of course longevity would be my worry boosting 10.2:1 on stock internals on a civic.
#22
Racer
Thread Starter
Thanks again everyone....
SiGGy,
That Civic was boosted since new (4+ years) and never had any problems at all.......well, ok--a slight traction problem, but still.
SiGGy,
That Civic was boosted since new (4+ years) and never had any problems at all.......well, ok--a slight traction problem, but still.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#23
Moderator Alumnus
Originally posted by DeansblackCLS
Thanks again everyone....
SiGGy,
That Civic was boosted since new (4+ years) and never had any problems at all.......well, ok--a slight traction problem, but still.
Thanks again everyone....
SiGGy,
That Civic was boosted since new (4+ years) and never had any problems at all.......well, ok--a slight traction problem, but still.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Guess you guys are doing something right
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#24
Revving at 9K...
Holy!! That is awsome... that should even the playing field a bit with all of the other 3.5 liters on the street... ![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Very seriously interested in the Tranny upgrade!
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Very seriously interested in the Tranny upgrade!
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#26
Racer
Thread Starter
SiGGy,
40,000 + miles--daily driven at 10PSI all day, every day....the car is a beast to say the least......maybe we are doing something right?
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
CLS2001_97124,
Exactly.
I will be keeping everyone in the loop on the Tranny--have no fear....pricing will be happening very soon.
Dean
40,000 + miles--daily driven at 10PSI all day, every day....the car is a beast to say the least......maybe we are doing something right?
![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
CLS2001_97124,
Exactly.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Dean
#27
Safety Car
Dean.
What length rods did you use? I assume you used the MDX crank. Since you said they were shot-peened, I assume you are using stock rods (either MDX or CL-S) with custom pistons. I want to know because I am interested in figuring out the rod-ratio you have in this motor - gives me an idea of what type of power-band to expect.
Thanks!
What length rods did you use? I assume you used the MDX crank. Since you said they were shot-peened, I assume you are using stock rods (either MDX or CL-S) with custom pistons. I want to know because I am interested in figuring out the rod-ratio you have in this motor - gives me an idea of what type of power-band to expect.
Thanks!
#29
Safety Car
Okay... this will be interesting to see in the dyno. The CL-S with light mods makes a lot of power from 5.5K to 7.5K - this motor should have a LOT of low-end grunt - but I am curious about top-end power (NA, that is). I am sure when you throw in a blower or turbo it should kick some butt!!
Good job...
Good job...
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#34
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
i dont think there was this much attention for comptechs sc!! i am also very excited about the kit. maybe we can show them G's what a real 3.5 liter is made of! j/k
awaiting the final production.
awaiting the final production.
#36
Cost Drivers!!!!
Originally posted by power3dfx
i dont think there was this much attention for comptechs sc!! i am also very excited about the kit. maybe we can show them G's what a real 3.5 liter is made of! j/k
awaiting the final production.
i dont think there was this much attention for comptechs sc!! i am also very excited about the kit. maybe we can show them G's what a real 3.5 liter is made of! j/k
awaiting the final production.
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
#37
Administrator Alumnus
Originally posted by power3dfx
i dont think there was this much attention for comptechs sc!! i am also very excited about the kit. maybe we can show them G's what a real 3.5 liter is made of! j/k
awaiting the final production.
i dont think there was this much attention for comptechs sc!! i am also very excited about the kit. maybe we can show them G's what a real 3.5 liter is made of! j/k
awaiting the final production.
You guys crack me up...
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#38
Cost Drivers!!!!
Originally posted by Scrib
Geez... So now instead of comparing HP numbers with the CLS and G, we're now moving over to motor size comparisons.
You guys crack me up...
Geez... So now instead of comparing HP numbers with the CLS and G, we're now moving over to motor size comparisons.
You guys crack me up...
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
#39
Administrator Alumnus
Originally posted by Zapata
There IS a displacement different between the two engines
Well we no longer have to worry about that
There IS a displacement different between the two engines
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Ya well, it's about time you Acura boys caught up!!!
![Poke](https://acurazine.com/forums/images/smilies/poke.gif)
j/k
#40
Cost Drivers!!!!
Originally posted by Scrib
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Ya well, it's about time you Acura boys caught up!!!![Poke](https://acurazine.com/forums/images/smilies/poke.gif)
j/k
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Ya well, it's about time you Acura boys caught up!!!
![Poke](https://acurazine.com/forums/images/smilies/poke.gif)
j/k
I know! But ya know what they say.....let sleeping gaints lie....we'll now you've done it....here come the pain!
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Chuckle](https://acurazine.com/forums/images/smilies/chuckle.gif)
How's the car?