I know this has probably been asked but do we gap them? Denso's site says no but the gap seems smaller than .44 when I measure.

Thanks in advance. I just want to get this install done without any problems and I'm probably being overly cautious.

 

Nope. But if you do be very careful because those thin iridium tip break off easy.

 

Thanks. I'll drop them in and see what happens.

 

What is the part # for those plugs? My plugs are about due for a swap out.

 

IK22 and the box also has an additional # of 5310

 

Thanks for da info .

 

You can get them from "Auto Parts Warehouse" on the NET. I paid 9.99 for each + 6.6 shipping.

 

I bought mine from www.sparkplugs.com for about the same price, maybe a little less.

 

In fact in the instructions Comptech points out NOT to touch the spark plugs at all.

 

I didn't even see where it mentioned the plugs in the instructions?

 

it is 1 of the first steps.

 

Found my problem. I was working from a prelim copy of instructions that I downloaded from Comptech. The plugs are not shown on the downloaded copy but are on the instructions with the SC as #3A.

I know - rookie move but the pictures on my printed copy were more clear done on a color laser. Only difference in instructions that I found.