How do you remove staples that hold on the 03 6MT shift boot?
#1
CLS 6MT Navi
Thread Starter
How do you remove staples that hold on the 03 6MT shift boot?
And how do you reinstall a new boot, do you restaple it to the white plastic ring?
Looks like a cheap-azz way to attach the boot bottom to the trim piece.
Looks like a cheap-azz way to attach the boot bottom to the trim piece.
#4
CLS 6MT Navi
Thread Starter
haha good one
,
well I guess I actually am wondering about the reinstall, do you just restaple? They look like industrial grade heavy-duty staples which I don't have and the plastic trim it is stapled too is pretty thick. I don't think staplers I have access to will do it. just trying to see how others have attached new boots with a similar type of install as OEM.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
well I guess I actually am wondering about the reinstall, do you just restaple? They look like industrial grade heavy-duty staples which I don't have and the plastic trim it is stapled too is pretty thick. I don't think staplers I have access to will do it. just trying to see how others have attached new boots with a similar type of install as OEM.
#6
My only car is a Bus
Join Date: Sep 2005
Location: Republik of Kalifornia
Posts: 3,254
Likes: 0
Received 1 Like
on
1 Post
I took the staples out, installed the new boot, and just reused the same holes with the old staples. Seemed to hold just fine. Only tricky thing is lining the staples up through the leather but no that hard.
#7
CLS 6MT Navi
Thread Starter
Thanks, good to know how you did it. Did a screwdriver or knife work to remove the staples? I see dealers want over $100 for the shift boot, not sure if the trim plate is included, don't want to break it.
I plan to replace mine with real leather, hopefully perforated w/red stitching.
I plan to replace mine with real leather, hopefully perforated w/red stitching.
Trending Topics
#9
"It's sexy time!" (borat)
Originally Posted by 123456SPEED
I plan to replace mine with real leather, hopefully perforated w/red stitching.
Where are you gonna get it? Im looking into replacing mine too.
#10
"It's sexy time!" (borat)
I put in the Neuspeed Short Shifter Adapter and when I fixed my boot I just used a heavy duty super glue. It hold just fine.
If not that, then I would used your old fasion staple gun. But if you do that you run the risk of crackin the plastic thatthe boot was stapled to in the first place.
But that leads me to my Question!!
When I put my Car in 3rd or 5th gear, everything pops out of place. I need a way to hold that boarder & boot in place while im driving but if I want to I can remove it, with out damaging the console around the shifter.
Any suggestions?
If not that, then I would used your old fasion staple gun. But if you do that you run the risk of crackin the plastic thatthe boot was stapled to in the first place.
But that leads me to my Question!!
When I put my Car in 3rd or 5th gear, everything pops out of place. I need a way to hold that boarder & boot in place while im driving but if I want to I can remove it, with out damaging the console around the shifter.
Any suggestions?
#12
The MAN....who else?
Join Date: Nov 2005
Location: MD
Age: 45
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I used a flathead to remove and hot glue to replace. SuperGlue or LockTite might hold better. If you have an industrial stapler with bigass staples...definitely use it. Otherwise...glue it.
Where did you get a replacement boot from?
Where did you get a replacement boot from?
#13
Originally Posted by ANDY03CL-S
When I put my Car in 3rd or 5th gear, everything pops out of place. I need a way to hold that boarder & boot in place while im driving but if I want to I can remove it, with out damaging the console around the shifter.
Any suggestions?
Any suggestions?
Too bad you glued your shift boot...cuz that seems that you boot is stretched out too far....get a blow dryer and loosen the glue and give your boot some more slack...
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#17
CLS 6MT Navi
Thread Starter
Well I found a place that will make what I want but they need me to send my stock boot in and I will not get it back. Thinking it over. The stock boot costs over $100 if I have to replace it..
#20
Team Owner
Join Date: Oct 2000
Location: Hellertown, Pa. USA
Age: 57
Posts: 20,014
Likes: 0
Received 0 Likes
on
0 Posts
If anyone's looking for a stock boot & knob, I have one that's just sitting in a box collecting dust in the garage right now.
It's from a 2003 6-Speed CLS and was only used about a month.
50-shipped
It's from a 2003 6-Speed CLS and was only used about a month.
50-shipped
![](http://photos.imageevent.com/shawnsef/ebaystuff/IMG_6399.jpg)
#21
Recently turned 18
Originally Posted by Shawn S
If anyone's looking for a stock boot & knob, I have one that's just sitting in a box collecting dust in the garage right now.
It's from a 2003 6-Speed CLS and was only used about a month.
50-shipped
It's from a 2003 6-Speed CLS and was only used about a month.
50-shipped
#23
The MAN....who else?
Join Date: Nov 2005
Location: MD
Age: 45
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Where are you located in PA Shawn? I will drive to pick it up if you drop the price a little...haha! Cant believe the stealership charges so much for these.
#24
My only car is a Bus
Join Date: Sep 2005
Location: Republik of Kalifornia
Posts: 3,254
Likes: 0
Received 1 Like
on
1 Post
'Stealership'? My friend, only about 2,900 of these cars were built, so how many boots do you think there were? The knob is a Prelude/NSX knob... but not the boot. Are dealerships supposed to pay Honda $50 for this and sell it for $51? You are buying both parts...
#25
Recently turned 18
Online OEM parts website is charging 177 plus shipping and they only sell them together. Not to ruin your bargain hunt Buddy but this is about what you pay for say a Momo shift knob alone (50+). Maybe you'll still be able to get a deal though. You can't spend dust! hahaha
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#28
The MAN....who else?
Join Date: Nov 2005
Location: MD
Age: 45
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I know you cant spend dust!! I have a Skunk2 gunmetal shift knob, just need a new boot to go with it. My OEM boot has been a POS since I bought the car---and the trim at the bottom of the boot has never been stationary, always moves when I shift....so I was just looking for a clean way to take care of both!
#29
Recently turned 18
Originally Posted by Buddy4679
I know you cant spend dust!! I have a Skunk2 gunmetal shift knob, just need a new boot to go with it. My OEM boot has been a POS since I bought the car---and the trim at the bottom of the boot has never been stationary, always moves when I shift....so I was just looking for a clean way to take care of both!
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#30
The MAN....who else?
Join Date: Nov 2005
Location: MD
Age: 45
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I figured as much b/c you wouldnt be talkin that mess to me!! haha....anyways...just sharing my "issue" in regards to the shift boot...Any ideas where to shop for a replacement that isnt necessarily branded with MOMO or whoever and just a clean, nice looking boot?
#33
Drifting
when you buy the boot, does it come attached to the trim ring? i don't know about honda, but nissan sells them like that. a new piece is complete and assembled.
#34
The MAN....who else?
Join Date: Nov 2005
Location: MD
Age: 45
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Thats the thing, the boot itself is fine....I just dont have the trim ring to attach at the top of the boot under the shift knob. Once I have that----everything else is perfect.
Any suggestions?
Any suggestions?
#35
Recently turned 18
I would suggest picking up some zip ties. Turn the boot inside out. Put the zip tie around the top, leaving a 1/4" or so above the zip tie. Using your finger as a temp. gauge, pull the zip tie until it's loosely snug around your finger. Now go slip this over your shifter, top first, inside out. (Assuming you've removed the knob) Fold what is the bottom of the boot, down over the top so that you now have the boot right side in and can no longer see the zip tie. Push this down, install knob and without letting the zip tie ride up over the end of the boot, pull it tight just under the knob. You should be in there!
sidenote: I have a brand spanking new boot I want to sell. It matches the OEM boot but is perforated (like the seats) on two opposing panels. Looks good, but not quite what I wanted. I paid 55, will sell for 50 plus shipping. It would look VERY good with the S2K/TSX shift knob as the perforation panels and plain panels match up with the CL's interior scheme.
PM for pics. Someone can host them.
sidenote: I have a brand spanking new boot I want to sell. It matches the OEM boot but is perforated (like the seats) on two opposing panels. Looks good, but not quite what I wanted. I paid 55, will sell for 50 plus shipping. It would look VERY good with the S2K/TSX shift knob as the perforation panels and plain panels match up with the CL's interior scheme.
PM for pics. Someone can host them.
#38
My only car is a Bus
Join Date: Sep 2005
Location: Republik of Kalifornia
Posts: 3,254
Likes: 0
Received 1 Like
on
1 Post
Bought locally. Here's one:
MOMO Anatomico Shift Knob Short
http://store.racinglab.com/moanshshknl.html
Momo Performance Leather Shift Boot
http://store.racinglab.com/momperleatsh.html
I also installed the Neuspeed short shift kit and, combined with the shorter knob, makes driving a real pleasure.
Hope this helps.
MOMO Anatomico Shift Knob Short
http://store.racinglab.com/moanshshknl.html
Momo Performance Leather Shift Boot
http://store.racinglab.com/momperleatsh.html
I also installed the Neuspeed short shift kit and, combined with the shorter knob, makes driving a real pleasure.
Hope this helps.
#39
"It's sexy time!" (borat)
I also have the Neuspeed Short Shifter adapter and the silver brush peice that goes around the boot keeps popping out of place when I put it into 5th gear. I cant get it to stop. I dont know how your is set up, but I had to shave down the plastic surrounding that holds the boot down so that it would fit. (the part that is stapled to the boot.)
CL6....do you have this problem? If not what did I do wrong and how do I fix it?
And will that Momo boot work with anyother shiftknob?? Cuz I just got the TSX Shift knob and I spent quit a bit of money on it and I do not want it to go to waste. But that is a good looking boot. If it will fit I will have to invest.
Thanks.
CL6....do you have this problem? If not what did I do wrong and how do I fix it?
And will that Momo boot work with anyother shiftknob?? Cuz I just got the TSX Shift knob and I spent quit a bit of money on it and I do not want it to go to waste. But that is a good looking boot. If it will fit I will have to invest.
Thanks.
#40
My only car is a Bus
Join Date: Sep 2005
Location: Republik of Kalifornia
Posts: 3,254
Likes: 0
Received 1 Like
on
1 Post
I used double-sided tape to hold the plastic silver bezel to the console. It works very well. The Momo boot... Well it fits so well because it has a thread at its top, which is designed to screw into the bottom of the Momo knob. If you use the Momo knob and a different boot you have to figure out a way to keep it snug. I wasn't too happy having to buy the Momo boot but it does work very well.