GROUPBUY: Brembo Brakes + SS Lines + Ceramic pads
#41
Can u get 13" rotors for the front and the rear? If that is possible can stock calipers be used until aftermarket calipers are found to match the 13" rotors?
Also how much for rear pads?
This is only for stock size rotors
Juker008
Also how much for rear pads?
This is only for stock size rotors
Juker008
#43
I have put the 1st order in for the following people.
mc222
peiqinglong
6spdmanual
smitty
fotis
Bulldog01
morpheu6d9
tmk70
Soopa
You guys should be getting a call today or tommrow to arrange payments
mc222
peiqinglong
6spdmanual
smitty
fotis
Bulldog01
morpheu6d9
tmk70
Soopa
You guys should be getting a call today or tommrow to arrange payments
#47
Quick question,
Is there any warranty for all the products? Juz curious
man you guys are some picky mofo's damn for this price i'd just buy two and not worry about it. but non the less, I'll call them up and ask
Is there any warranty for all the products? Juz curious
man you guys are some picky mofo's damn for this price i'd just buy two and not worry about it. but non the less, I'll call them up and ask
#50
When we getting the rears???... now that your bailing out, I guess we will never see them??
I wouldn't call it bailing out... heheh Im still gonna 'live' on acura-cl.com just like how others who trade their cl in can't leave this site. , I'll let u know as soon as they are available
I wouldn't call it bailing out... heheh Im still gonna 'live' on acura-cl.com just like how others who trade their cl in can't leave this site. , I'll let u know as soon as they are available
#54
Originally posted by mattg
are they lighter than the stock rotors?
17.8 lbs each for Xdrilled/slotted and 6.4 for the Pads in comparison stock ones are 18.4 lbs
are they lighter than the stock rotors?
17.8 lbs each for Xdrilled/slotted and 6.4 for the Pads in comparison stock ones are 18.4 lbs
Ruf
#55
Originally posted by RUF87
and ???
and ???
i'll be removing my rotor backing plates also, as soon as i get in on the GB.
seriously...
NOVA, can we pay w/ a credit card?
#56
Originally posted by mattg
i removed the rear speakers, 3rd brakelight, plastic ski boot door and battery box too :o
i'll be removing my rotor backing plates also, as soon as i get in on the GB.
seriously...
NOVA, can we pay w/ a credit card?
i removed the rear speakers, 3rd brakelight, plastic ski boot door and battery box too :o
i'll be removing my rotor backing plates also, as soon as i get in on the GB.
seriously...
NOVA, can we pay w/ a credit card?
#57
nova my email address is mretif@yahoo.com
#58
NOVA, do you know how much the rotors, ss lines, and pads are regularly? That may give me some more incentive to buy now. I checked there site, raceconcepts.net, but didn't see that info. Thanks.
here do this, call your acura dealer ask how much oem is, or better yet go to www.autocarparts.com and check since alot of peole shop from there. if your not interested then shit i could careless, when your rotors warp after warranty go and see how much it'll cost you from acura -400 bucks that what they charged honda under warranty...
here do this, call your acura dealer ask how much oem is, or better yet go to www.autocarparts.com and check since alot of peole shop from there. if your not interested then shit i could careless, when your rotors warp after warranty go and see how much it'll cost you from acura -400 bucks that what they charged honda under warranty...
#59
Originally posted by mretif
nova my email address is mretif@yahoo.com
nova my email address is mretif@yahoo.com
#60
Mmmm....I don't have these but I know when Austin hosted these a lot of guys are having problems with the rotor plating coming off and the rotor rusting...I'd check acura world .com or IM him as Austin 519 (sans the space) ...because he's found another distributor who does double coated stock rotors for a cheaper price to boot...he's my boy and has taken care of me well...
#61
Originally posted by TLRunner
Mmmm....I don't have these but I know when Austin hosted these a lot of guys are having problems with the rotor plating coming off and the rotor rusting...I'd check acura world .com or IM him as Austin 519 (sans the space) ...because he's found another distributor who does double coated stock rotors for a cheaper price to boot...he's my boy and has taken care of me well...
Mmmm....I don't have these but I know when Austin hosted these a lot of guys are having problems with the rotor plating coming off and the rotor rusting...I'd check acura world .com or IM him as Austin 519 (sans the space) ...because he's found another distributor who does double coated stock rotors for a cheaper price to boot...he's my boy and has taken care of me well...
x 423521743215
don't even get me started.
#62
Any idea what is would cost to get all this shit installed?
If rear rotors were available, I'd really consider it. Another problem is, I don't know the first thing about brakes, and what would be the better rotor & pad to get.
two hour job usually, @75 dollars an hour probably 150
If rear rotors were available, I'd really consider it. Another problem is, I don't know the first thing about brakes, and what would be the better rotor & pad to get.
two hour job usually, @75 dollars an hour probably 150
#63
Originally posted by NOVA
here do this, call your acura dealer ask how much oem is, or better yet go to www.autocarparts.com and check since alot of peole shop from there. if your not interested then shit i could careless, when your rotors warp after warranty go and see how much it'll cost you from acura -400 bucks that what they charged honda under warranty... [/B]
here do this, call your acura dealer ask how much oem is, or better yet go to www.autocarparts.com and check since alot of peole shop from there. if your not interested then shit i could careless, when your rotors warp after warranty go and see how much it'll cost you from acura -400 bucks that what they charged honda under warranty... [/B]
Trust me I am totally calm, hehe that was posted right before I went to go buy the 740iL so i was alittle tense hehe mybad
No prob dude, enjoy that new ride.
#64
Hey im so swamped w/ this GB. Im gonna make it easier for you guys, and me.
call Race concept directly @ (714) 547-3581 and ask for Woody. YOU MUST MENTION THIS GROUPBUY. "Acura-CL Groupbuy setup by Joe"
He will honor the prices to all who mentions this. everyone , including people who I have said i already put the order in, please contact them directly, Raceconcept is soo swamped they not have time to make calls individually and then leave messages if your not avail.
Call them NOW!!
call Race concept directly @ (714) 547-3581 and ask for Woody. YOU MUST MENTION THIS GROUPBUY. "Acura-CL Groupbuy setup by Joe"
He will honor the prices to all who mentions this. everyone , including people who I have said i already put the order in, please contact them directly, Raceconcept is soo swamped they not have time to make calls individually and then leave messages if your not avail.
Call them NOW!!
#67
ok i have a few quesitons cause im newb. ok for my '99 3.0 cl
i would have to get the ceramic ones for the front and the met ones for the back, right? well what happens when i need to change them? is there a different wear time on them? can i get the met ones for the front and the back? also, is it possible to use the stock pads on the new roaters?
i would have to get the ceramic ones for the front and the met ones for the back, right? well what happens when i need to change them? is there a different wear time on them? can i get the met ones for the front and the back? also, is it possible to use the stock pads on the new roaters?
#71
Just spoke to Woody...nice guy.
I ordered CD & Slotted fronts and rears, with metal master pads, and lines...~$445 shipped to MA. They'll be shipped middle of next week, and he'll e-mail tracking info when they go out.
Thanks, NOVA!!
I ordered CD & Slotted fronts and rears, with metal master pads, and lines...~$445 shipped to MA. They'll be shipped middle of next week, and he'll e-mail tracking info when they go out.
Thanks, NOVA!!
#74
Originally posted by Scrib
Damn, that sounds like a hell of a deal.
Damn, that sounds like a hell of a deal.
I'm gonna do these with a friend when he does his Supra brakes. We'll pull the parts off and paint the calipers on a Friday night, put them back together on Saturday, and if something takes too long, we'll still have Sunday. This way, I ain't payin' for labor...excpt some beer and food.
#78
Originally posted by Scrib
I fuggin' wish my rotors would warp so I could justify the spend to the wife.
I fuggin' wish my rotors would warp so I could justify the spend to the wife.
That way Acura would cover half the cost or so and they wouldn’t be bothered by us for multiple repairs & replacement.
That sounds better then putting factory parts back in so they fail again and again.
Wayne, Jens….. Think you could push that past the bean counters at PAA ???
Shawn S
#79
EVERYONE NEEDS TO READ THIS!!
Just talked to Woody at Race Concepts. Had a good conversation with him. I was just running through everything just making sure of all of the details. I said "so these are just Brembo blanks that you guys machine" He said "no, these arent brembos they dont make brembos for your year." He said that these are an OEM quality rotor by a company called EMC or ECM, I cant remember which. Nova, can you look into this. I think it is important that we all know exactly what we are paying for.
Just talked to Woody at Race Concepts. Had a good conversation with him. I was just running through everything just making sure of all of the details. I said "so these are just Brembo blanks that you guys machine" He said "no, these arent brembos they dont make brembos for your year." He said that these are an OEM quality rotor by a company called EMC or ECM, I cant remember which. Nova, can you look into this. I think it is important that we all know exactly what we are paying for.
#80
Originally posted by Shawn S
What I wish is that you could apply the cost of FACTORY parts & labor towards this upgrade system if your OEM parts warped.
That way Acura would cover half the cost or so and they wouldn’t be bothered by us for multiple repairs & replacement.
That sounds better then putting factory parts back in so they fail again and again.
Wayne, Jens….. Think you could push that past the bean counters at PAA ???
Shawn S
What I wish is that you could apply the cost of FACTORY parts & labor towards this upgrade system if your OEM parts warped.
That way Acura would cover half the cost or so and they wouldn’t be bothered by us for multiple repairs & replacement.
That sounds better then putting factory parts back in so they fail again and again.
Wayne, Jens….. Think you could push that past the bean counters at PAA ???
Shawn S
While I don't think my rotors have "warped" yet, there is a grinding noise of sorts, at times, when I apply pressure to the brakes. Is that a sign of bad things to come???