anthracitecl

iTrader: (7)

Mine arrived today!!! Yay!!!! I'm so tired today, so I'm gonna install it tomorrow. I can't waittttttttt!

civicdrivr

iTrader: (9)

It appears that the bracket will not fit on with my Neuspeed bar. I need to cut off the last part of the bracket because that plus the strut bar = no threads to bolt onto. Thats OEM top hats BTW.

Thoughts on cutting the bracket and using three mounting holes?

ChucksCL-S

Just put mine on, couple of notes. One of the motor mount bolts felt like it was stripping on the way out and was very hard to turn. The new longer bolts that hold the bracket went right in however with no trouble. No need to support the engine from underneath. At the pass. side shock tower the end of the O.E. strut bar must be lifted up. I used a pry bar to do it, and I did loosen the two nuts under the small access door where the wipers are just in case. The plate they supply fits over the four studs, and I used a small hammer to coax it into place.
Otherwise was a easy job, will drive the car for impressions tomorrow.

ChucksCL-S

Drove around a good bit today and I like the damper. Firms up shifting into gear and upon acceleration. Worth it in my mind just to save our troublesome motor mounts. I'm glad I did it, took my about 45 minutes.

thelastaspec

Would you say it is worth it if you put down 240-250+ whp?

ChucksCL-S

Yes I would.

friesm2000

iTrader: (4)

it be worth it with a completely stock car, especially if you like to do ANY type of sprinted driving

Rajca

iTrader: (8)

^agree

fsttyms1

thelastaspec

2nd sign up list:

1) thelastaspec
2) kdawg8526
3) jaMezBOI
4) AznwayTL
5) JCharged
6) sbuswell

g1underground

iTrader: (1)

Installed mine over the weekend and drove it around. The first thing I noticed was the tires don't chirp punching 1st to 2nd and 2nd to 3rd. Adds a nice solid feel to shifting.

Excelerate

iTrader: (1)

Once we get 10 people on the list I'll make a new promo code for the second round of the GB.

Rajca

iTrader: (8)

1) thelastaspec
2) kdawg8526
3) jaMezBOI
4) AznwayTL
5) JCharged
6) sbuswell
7) rajca

97BlackAckCL

iTrader: (6)

Can someone measure the distance between the holes in the top bracket for me?

civicdrivr

iTrader: (9)

The holes where the dampener itself mounts? I plan on cutting my bracket sometime this week so if you dont have it by then Ill get them for you.

Excelerate

iTrader: (1)

Ok we have over 10 between the CL and TL forum.

For the second Groupbuy use promo code INGALLSGB

Please start placing your orders right away to encourage others and note when you have paid in this thread.

97BlackAckCL

iTrader: (6)

No the holes where the bracket mounts to the top hat/strut brace, need the distance between them, a pic would help as well. I need to see if I can get them to line up with my 1G without having to drill new holes or fab a bracket

civicdrivr

iTrader: (9)

Ok, I can take a pic of the bracket before I cut it. Im at work now but I can get a pic tonight.

StreetKA

iTrader: (8)

1) thelastaspec
2) kdawg8526
3) jaMezBOI
4) AznwayTL
5) JCharged
6) sbuswell
7) rajca
8) StreetKa ?

ChucksCL-S

Distance between is 1 3/8 inches.

thelastaspec

woo!!
yaa, order now:
I just did!!!
Call the XLR8 guy if you need stuff - heel help you out!
here's the link to the thread - were at ~11 now and that means they start to come!!!
https://acurazine.com/forums/showpos...4&postcount=82

You need the code: INGALLSGB
apply it in the check out

For updates keep ckecking the 2g tl thread here:
https://acurazine.com/forums/2g-tl-1999-2003-98/excelerate-performance-ingalls-engine-torque-damper-groupbuy-785413/

List now:

1) thelastaspec - Paid
2) kdawg8526
3) jaMezBOI
4) AznwayTL - Paid
5) JCharged
6) sbuswell
7) tweedle99 - (going to pay)
8) tweedle99 - (going to pay)
9) AMGala
10) Rajca
11) StreetKa

Let me know if you've paid and ill phone him with updates and get updates on shipping dates...

friesm2000

iTrader: (4)

wow i did not think just this mount world sell so well, just for acura's too, so quickly too....


like the last 2 weeks or something and excelerate has basically already sold like 30 of them

civicdrivr

iTrader: (9)

Measurements are in inches. Measurement is listed above the pictures.

2.947"


3.791"


.958"


1.691"


.983"


1.695"


3.006"


3.780"


1.659"


Hope that helps. BTW, the crossed out section is where I need to cut.

I know it would probably help to see it on the car. And dont mind the dog hair on the carpet.

97BlackAckCL

iTrader: (6)

Thanks Morgan

RUF87

Just got mine. I'm right in the middle of some major maintenance work on the car, so I'll be doing that as part of everything else. Should be a few days as I'm doing new brakes, struts, bushings, ball joints, timing belt and axles, hub & bearing (don't ask why on the last 2 )

Ruf

brian6speed

iTrader: (5)

why cant we get the roof spoiler made

friesm2000

iTrader: (4)

i was thinking, what heeltoe made us one..., but then again you have the CL , without an available factory bodykit (and no bullshit of an available 6-speed, cause that swaps right into the TL)

Excelerate

iTrader: (1)

5 new orders were placed for the 2nd GB; we need at least 5 more for me to order from Ingalls and then 10 after that to complete the Groupbuy.

Rajca

iTrader: (8)

ill be placing my order tonight

Rajca

iTrader: (8)

just ordered mine.

brian6speed

iTrader: (5)

[QUOTE=helpwanted;12218296]and took twenty minutes to install:QUOTE]

How come you arent using the cowl pieces for the ct strut bar? I am working on installing mine. The bolts from my coils stick up alot more than stock. it looks like i will have to completely remove the strut bar to get the brackets on. Hopefully this goes somewhat smooth.

friesm2000

iTrader: (4)

[quote=brian6speed;12259652] or this is what i did personally, undo the strut top bolts, then jack up the car a little, so those studs drop down, then just slid the bracket underneth

brian6speed

iTrader: (5)

[QUOTE=friesm2000;12259775]Yea that is what i was thinking, thnx for the tip. Going to Acura meet so no time to finish now tho.

Excelerate

iTrader: (1)

We need at least another 5 orders. And I would like to have this GB finished by Monday so please get your orders in and paid.

Rajca

iTrader: (8)

if nothing happens within mid sept, ill just pay the extra 20 and buy one.

SilverPhoenix

Order just sent. How many left to make the groupbuy?

thelastaspec

here's who has not paid...

1) thelastaspec - Paid
2) kdawg8526 - Is going to pay<
3) jaMezBOI
4) AznwayTL - Paid
5) JCharged
6) sbuswell - Paid
7) tweedle99 - Paid
8) tweedle99 - Paid
9) AMGala - Paid
10) Rajca - Paid
11) StreetKa
12) DC3328 - Paid
13) ANC297 - Paid
14) Tom Blasing - Paid
15) LacViet - Paid
16) Assclown - Paid mutha fucka! __________________
17) SilverPhoenix - Paid

thelastaspec

I will add you to the list , if everyone else pays the orders will start moving...
I think we need 4 (it will be 3 soon)...

thelastaspec

UPS tracking numbers are starting to be emailed.
Delivery date will be ~Sept 8-9th

1) thelastaspec - Paid
2) kdawg8526 - Is going to pay<
3) jaMezBOI
4) AznwayTL - Paid
5) JCharged
6) sbuswell - Paid
7) tweedle99 - Paid
8) tweedle99 - Paid
9) AMGala - Paid
10) Rajca - Paid
11) StreetKa
12) DC3328 - Paid
13) ANC297 - Paid
14) Tom Blasing - Paid
15) LacViet - Paid
16) Assclown - Paid mutha fucka! __________________
17) SilverPhoenix - Paid
18) xxxboboxxx - PAID!

Excelerate

iTrader: (1)

All orders must be placed by tomorrow in order to get the GB price!!!