Sprio and I are going to be installing the sways today..But since the TL board is down, we dont have any photo instruction on how to install them. I mean i remember what the pictures look like, and what bolts are suppose to come off. but it would be nice to refresh my memorey before we start... SO does anyone have photos still of the install???

 

Download them HERE

 

look at old unit on the car, take off, put new one in its place, follow comtech directions. This is very easy, you'll say that after you do one install.

 

ok one lil problem.. i have a 4 ton lift.. and when its fully up the most it can go.. the car jacks wont go under the car.. where besides the "points" that acura says to put the car jack.. where can i put the jack stands? I see there is a big bolt by the sways.. can i put it there?

 

oh by the way.. im lifting the car up from the front... would it be better if i lifting it one side by one?

 

Go to the Comptech.com site. They have a pdf file that is the same as the instructions they send with the bars.

 

Here are the original instructions including pics that Tim used on the FAQ's at acura-tl.com. I used them and they are perfect. Just make sure you have all the right tools especially the exact allan/hex key. Good Luck
http://home.earthlink.net/~eujinc/tl/sways.htm

[ 08-16-2001: Message edited by: Mr Hyde ]

 

thanks soo much, we are having a little problem getting the end links out.. they are really tight. We we finally got it moving....