carbon fiber door pillers!!!
#1
Thread Starter
COME AT ME BRO!
Joined: Jun 2004
Posts: 9,796
Likes: 13
From: st.johns, NL (CANUKISTAN)
carbon fiber door pillers!!!
im working out the methods right now i have about 3 feet of carbon fiber and i just got some resin today. so far i cut out a small part and layed on some broken plastic to see how it will adhear. if it works like its supposed to im gunna make my pillars in carbon fiber. its just gunna lay over the the factory part becuase i dont have the tools to pressure form it in the whole part. here is a pic of what i am using to test it out. rember the resin is still wet and by no means is it finished its just a test peice. wish me luck. if you dont know what part im talking about it where you mount after market gauges to. here is a pic of the test.
#5
Originally Posted by evilone
im working out the methods right now i have about 3 feet of carbon fiber and i just got some resin today. so far i cut out a small part and layed on some broken plastic to see how it will adhear. if it works like its supposed to im gunna make my pillars in carbon fiber. its just gunna lay over the the factory part becuase i dont have the tools to pressure form it in the whole part. here is a pic of what i am using to test it out. rember the resin is still wet and by no means is it finished its just a test peice. wish me luck. if you dont know what part im talking about it where you mount after market gauges to. here is a pic of the test.
#6
I made a custom r/c wing using fiberglass, if you aren't gonna vacuum form the piece your might want to squeege the resin to get a uniform thickness, so sanding, polishing afterwards will be easier. If you want to repair broken plastic pieces from behind, you can use ABS plastic glue and a metal reinforcement screen, you just glob the ABS glue.
Trending Topics
#12
Thread Starter
COME AT ME BRO!
Joined: Jun 2004
Posts: 9,796
Likes: 13
From: st.johns, NL (CANUKISTAN)
Originally Posted by Dark DJ
where do y'all get ur carbon fiber from?
#20
Thread Starter
COME AT ME BRO!
Joined: Jun 2004
Posts: 9,796
Likes: 13
From: st.johns, NL (CANUKISTAN)
Originally Posted by car_lost
that would be fucking awesome. im getting a carbon fiber trim kit for my dash so these things would go great with my interior!
#21
Originally Posted by evilone
i gotta see how much its gunna cost me in the pillars from acura to get the price set on the whole thing so you wouldnt have to ship me out yours and wait for me to make it then ship it back. plus when you go to sell the car you can take them out and sell them on here or ebay.
#25
Thread Starter
COME AT ME BRO!
Joined: Jun 2004
Posts: 9,796
Likes: 13
From: st.johns, NL (CANUKISTAN)
umm you really cant diy unless you know how to clear coat. it all has to be wet sanded and cleared so its uniform and even with a nice gloss. dont worry i will be maken them and selling them in the black market.
#26
Originally Posted by evilone
i was thinking the same thing
good when your ready you can contact me...until then lay low and do not sell behind our backs or else I will show you who is pure evil...
Thread
Thread Starter
Forum
Replies
Last Post
soupi
2G TSX Audio, Bluetooth, Electronics & Navigation
14
11-15-2015 11:15 AM
LogicWavelength
3G TL Photograph Gallery
33
11-01-2015 09:38 AM