You think this is overkill?
#81
Originally Posted by Impulse05
I live in Canada .... cars are $10 000 more here than there for example go to subaru.com then subaru.ca and price out the EXACT same car .. I did .... $10 000 difference. EXACT SAME!! it makes me angry that the States gets everything for so cheap like GAS!!!! you guys are still paying under $1 a litre here its 1.28 a litre. Anyway yeah .. for here an M3 with under 15 000 k/m thats a good price. and a 3 year warenty. but this thread is about the Tsx's turbo!! lets get back to that ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#82
Originally Posted by ThirdLane
He said the M3 was going for 40k. Regardless if he had 25K down as a from his old vehicle. 40K for a M3 thats 5 years old is overkill to the negative side. When you can pick up very clean low mileage E46 M3's for 25K or less.
#86
boost = TSX's best friend
Thread Starter
Join Date: Jan 2005
Location: So Cal, USA
Age: 46
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
What's up people, still playing the waiting game for a couple of more parts and off to the dyno. Just my
about the whole M3/TSX debate, I know the price of M3s and TSXs vary but the look on the face of an M3 driver as he's being walked by a TSX is PRICELESS.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#87
Originally Posted by JDMCL9T
What's up people, still playing the waiting game for a couple of more parts and off to the dyno. Just my
about the whole M3/TSX debate, I know the price of M3s and TSXs vary but the look on the face of an M3 driver as he's being walked by a TSX is PRICELESS.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#89
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,171
Received 1,983 Likes
on
1,336 Posts
Lots of props for what you've gone and done under the hood of your car. I respect the work put into it and the ingenuity.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#91
boost = TSX's best friend
Thread Starter
Join Date: Jan 2005
Location: So Cal, USA
Age: 46
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mskierki
can we get some better pictures of the setup? Can we get a picture of the turbo and exhaust manifold?
Ask and you shall receive.
![](http://a471.ac-images.myspacecdn.com/images01/102/l_7aa3e03a8dd3620f18c76086ddd4fe06.jpg)
![](http://a113.ac-images.myspacecdn.com/images01/84/l_b6b80d2157759dcecd3887852affc460.jpg)
![](http://a139.ac-images.myspacecdn.com/images01/122/l_2d5c4f160acfd2177f1102f83803840a.jpg)
Originally Posted by ACCURATEin
Lots of props for what you've gone and done under the hood of your car. I respect the work put into it and the ingenuity. ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#92
Three Wheelin'
Join Date: Feb 2007
Location: Rockville, MD
Age: 39
Posts: 1,554
Likes: 0
Received 0 Likes
on
0 Posts
JDMCL9T, i'm sure we all appreciate what you are doing. I think this will be VERY big for the TSX community. i'm looking forward to getting more details.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#93
boost = TSX's best friend
Thread Starter
Join Date: Jan 2005
Location: So Cal, USA
Age: 46
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tsx536
Hmm...that's interesting man. You're not very far from me at all. Are you getting help from one of the local shops? Looking forward to hearing more details of your engine management. Keep up the good work ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#96
boost = TSX's best friend
Thread Starter
Join Date: Jan 2005
Location: So Cal, USA
Age: 46
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xjohnkdoex
did you have to do a lot of rearranging in the engine bay to fit everything, or was it minimal?
Only thing needed to be relocated was the battery tray but it's still in the same location, turned slightly.
#97
B A N N E D
Join Date: Sep 2003
Location: Jerzey
Age: 45
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JDMCL9T
Only thing needed to be relocated was the battery tray but it's still in the same location, turned slightly.
![Bawling](https://acurazine.com/forums/images/smilies/bawling.gif)
#101
boost = TSX's best friend
Thread Starter
Join Date: Jan 2005
Location: So Cal, USA
Age: 46
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CGTSX07
ttt, any time frame on when the dyno is getting done?
Originally Posted by dBski11
any updates??
If everything goes as planned, the car should be on the dyno early/mid next month.
#103
Fairly promising. I own an A/T for various reasons.. I realize our transmissions are garbage, but what's the reasonable gain for an A/T if one were to sacrifice amenities for this option? It sort of seems dumb to spend lots of money on mods you can't fully utilize but then again, you don't want stuff to break because you're greedy..
Just having zero knowledge of this stuff, is it even possible for an A/T user to run some more power without problem?
Oh this is all assuming the lack of traction control, etc didn't affect the transmissions operation.
Just having zero knowledge of this stuff, is it even possible for an A/T user to run some more power without problem?
Oh this is all assuming the lack of traction control, etc didn't affect the transmissions operation.
#105
Fairly promising. I own an A/T for various reasons.. I realize our transmissions are garbage, but what's the reasonable gain for an A/T if one were to sacrifice amenities for this option? It sort of seems dumb to spend lots of money on mods you can't fully utilize but then again, you don't want stuff to break because you're greedy..
Just having zero knowledge of this stuff, is it even possible for an A/T user to run some more power without problem?
Oh this is all assuming the lack of traction control, etc didn't affect the transmissions operation.
Just having zero knowledge of this stuff, is it even possible for an A/T user to run some more power without problem?
Oh this is all assuming the lack of traction control, etc didn't affect the transmissions operation.
#106
I spend 2 much time here
actually there aren't many examples of this happening so this is a big deal. especially if all he lost was traction control and cruise control.
#112
WOW. Forget the new car, I am still going to keep this whip after all. The other question what the price tag on this big mod ?????????
#114
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,593
Received 3,791 Likes
on
2,555 Posts
#115
boost owns
People can post pictures of a red TSX from SoCal all they want (I am so sick of that car btw) but we never hear anything conclusive about what's under the hood, HP figures, dyno sheets, video of it running, timeslips, etc. Until we see that, any claims of a turbo TSX are bullshit as far as I am concerned.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
#116
JDM Addict
https://acurazine.com/forums/members/castillo183-173957-albums-my-car-335/
^clicky.
...
.
...
![what](https://acurazine.com/forums/images/smilies/what.gif)
#119
boost owns
#120
boost = TSX's best friend
Thread Starter
Join Date: Jan 2005
Location: So Cal, USA
Age: 46
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
My apologies for not being more consistent with updates. Since the last time I posted, I added: a set of RC 750cc Peak n Hold injectors, Password JDM Plug n Play injector harness clips, a Vibrant flat black 3" straight through muffler and full 3" downpipe back exhaust piping, and a Walbro in-tank pump and off to the dyno I went. The first tuning session was completed with mixed results. We wanted to keep the "dead-head" fuel system as stock as possible but came to the conclusion that it won't be possible to get enough fuel for the target WHP we are looking for and maintain stock-like idle without adding a fuel return. So the next step for this project is to acquire/install: Skunk2 composite K-Series fuel rail, Aeromotive Fuel Pressure Regulator, 30' of steel-braided fuel line and an AEM methanol-injection system.
The methanol injection was not something I was told I would need but an extra 80WHP is possible which is why I'm getting it. My tuner is setting me up with three fuel maps: low-boost pump gas (7psi), higher-boost pump gas (10-12psi with methanol injection) and highest-boost race gas (18psi). All of these maps I will be able to toggle through by pressing a button "hidden" somewhere in the dash =). Another issue we have found is the limits of the factory clutch which is something I was expecting. I don't think I'll be able to dyno again with this stock clutch so it might be awhile before the next tuning session as I am saving up for the Exedy twin-disc before I go back and I'm also considering getting the Quaife LSD at the same time because the tranny will be out (almost 3K in tranny work). The stock clutch would probably hold @ 300whp but I'm greedy which is why I'll wait to go again. My new target WHP when I go back is now 350 on pump and methanol. Wish me luck, I'll keep you guys posted. By the way, the engine management system performed beautifully.
The methanol injection was not something I was told I would need but an extra 80WHP is possible which is why I'm getting it. My tuner is setting me up with three fuel maps: low-boost pump gas (7psi), higher-boost pump gas (10-12psi with methanol injection) and highest-boost race gas (18psi). All of these maps I will be able to toggle through by pressing a button "hidden" somewhere in the dash =). Another issue we have found is the limits of the factory clutch which is something I was expecting. I don't think I'll be able to dyno again with this stock clutch so it might be awhile before the next tuning session as I am saving up for the Exedy twin-disc before I go back and I'm also considering getting the Quaife LSD at the same time because the tranny will be out (almost 3K in tranny work). The stock clutch would probably hold @ 300whp but I'm greedy which is why I'll wait to go again. My new target WHP when I go back is now 350 on pump and methanol. Wish me luck, I'll keep you guys posted. By the way, the engine management system performed beautifully.
Last edited by JDMCL9T; 09-15-2008 at 10:32 PM.