Any luck with Sway Bars?

------------------
97 Black, 2.2CL, 5 spd, AEM Pulley/CAI, DC Header, Thermal R/D cat back, JET ECU upgrade, Magnecor Wires, upper/lower/front/rear bars, Eibach Pro-kit, KYBs, Red emblems, clears, PIAAs, front side markers, 98 grill, Momo shift, B & M shift adapter, BBS RX 17 X 7 1/2", FZ4s plus much more.

 

Nope...I am hoping that someone can custom fabricate them though. Anyone have contacts that would do this?? How much and location would be great!

------------------
Tw1112
CL 3.0 '98 - Cleared bumper, Hiper/Piaa/Polarg bulbs all around, PIAA 1700x fogs, AEM CAI, V1, and Mugen Pedals.

• My CL
• LA Autoshow
• SoCal Meet

 

u ever look at the stock one? they are pretty damn thick like 1 1/2

------------------
1997 Black Acura 2.2 CL
Currently-
PIAAs Everywhere, PIAA 1700X, Custom Grill, Clear Corners, OE Spoiler,
5% Tints (Limo), HKS Super Dragger Exhaust, AEM CAI, Venom 400
Comming Soon-
Headers or Ignition, Front Lip

 

True, but they still give a little too much body roll. Hoping that someone would make sways out of better material and maybe a little thicker. Does anyone know how thick the CL-S Comptech sways are?

------------------
Tw1112
CL 3.0 '98 - Cleared bumper, Hiper/Piaa/Polarg bulbs all around, PIAA 1700x fogs, AEM CAI, V1, and Mugen Pedals.

• My CL
• LA Autoshow
• SoCal Meet

 

hey tw 1700X's? good choice. i love them.

------------------
1997 Black Acura 2.2 CL
Currently-
PIAAs Everywhere, PIAA 1700X, Custom Grill, Clear Corners, OE Spoiler,
5% Tints (Limo), HKS Super Dragger Exhaust, AEM CAI, Venom 400
Comming Soon-
Headers or Ignition, Front Lip

 

94-97 accords won't fit? I don't see why not cause the frame and most of the car is identical. I don't see why they would place the mounts for the sways in different locations? Oh well.. if you tried and it didn't work.... oops on my part.

------------------
1997 Acura 2.2 CL (5spd)
rubber tires, windshield wipers, headlights, horn, steering wheel, BRAKE PEDAL, clutch, brake pads, driver seat, passenger seat, back seat, front windshield, rear windshield (with defroster), lumbar support, cruise control, intermitent wiper control, sun roof (tinted), engine, pistons (only 4), emergency brake handle, trunk w/ tools, spare tire

 

Yeah I wondered about fitting 94-97 accords on, but unfortunately, they changed the bushings on our cars and that is preventing a swap. It really does suck because people that want to make it for us would have to fabricate the bushing just for our cars

------------------
Tw1112
CL 3.0 '98 - Cleared bumper, Hiper/Piaa/Polarg bulbs all around, PIAA 1700x fogs, AEM CAI, V1, and Mugen Pedals.

• My CL
• LA Autoshow
• SoCal Meet

 

Yeah I love these things I got them early on when I think they just came out so the price wasn't too agreeable, but I still love them.

------------------
Tw1112
CL 3.0 '98 - Cleared bumper, Hiper/Piaa/Polarg bulbs all around, PIAA 1700x fogs, AEM CAI, V1, and Mugen Pedals.

• My CL
• LA Autoshow
• SoCal Meet

 

Hey Folks,

Here is the deal on the sway bars. According to Suspension Techniques Tech Dept, the bars the they make are usually the same diameter but are solid versus the factory hollow. The application was confirmed by A & H Motorsport that sell OEM Honda and Acura. The part numbers are the same for one but not the other. Getting polyurethane bushings would help some. Suspension Techniques has no plans of designing a set for the 1st Gen CLs.

------------------
97 Black, 2.2CL, 5 spd, AEM Pulley/CAI, DC Header, Thermal R/D cat back, JET ECU upgrade, Magnecor Wires, upper/lower/front/rear bars, Eibach Pro-kit, KYBs, Red emblems, clears, PIAAs, front side markers, 98 grill, Momo shift, B & M shift adapter, Wings West Type-R front spoiler, BBS RX 17 X 7 1/2", FZ4s plus much more.