hay guys, whats going on
#3522
CL in lawnmower status
alright here you go, looking at how it works exactly i don't really know what could be wrong, my best guess is that the little plastic thing(which holds the rod in the arm of the handle) broke and the rod just popped out of the hole. If that's not the case tho it seems it would be kinda complicated, as the section where the rods are connected to the actual part on the door that opens is all covered up, therefore i have no idea how it works in there.
This one shows how far the rod goes into the hole, not very far, but really snug in there due to the plastic cover part holding it
This one shows what position the rod and arm of the handle are in when it's in the normal position
And here is what postions those parts are in when you go to open the door(sorry this one looks blurry, couldn't get it to focus for some reason)
hope ths helps, but to figure it what is really wrong on yours and to fix it, you'll need to take that door panel off....... eventually
and goodluck
This one shows how far the rod goes into the hole, not very far, but really snug in there due to the plastic cover part holding it
This one shows what position the rod and arm of the handle are in when it's in the normal position
And here is what postions those parts are in when you go to open the door(sorry this one looks blurry, couldn't get it to focus for some reason)
hope ths helps, but to figure it what is really wrong on yours and to fix it, you'll need to take that door panel off....... eventually
and goodluck
#3524
CL in lawnmower status
ya no problem Nate.............what can i say...i was bored
well that and the cl is in the garage and with no door panel on, it was as easy as point and shoot
well that and the cl is in the garage and with no door panel on, it was as easy as point and shoot
#3526
CL in lawnmower status
i thought you would take them off anyways if you're gonna repaint them, which seems like a lot of trouble. I think it looks so much cleaner with less emblems but i kinda did like the look of the shiney ass emblems, but to each their own. And as far as the corners go, don't worry, if you fuck up, you can always buy smoked ones off ebay
#3527
N00berator
^ hahaha true, but i dont know man, i really dont wana take it off and then have the headache of putting them bak all lined up and shit. so imma use my artist skills and slowly black out the emblems in the back, and as far as the grill goes, shouldnt be a problem since its a bigger piece.
#3528
CL in lawnmower status
^hmmm, what do you think i should do with my emblems (besides put them on my trunk). I just thought of this as i was reading your post, cuz i have 2 full sets of emblems for the trunk (1 used, 1 brand new).....
oh and good luck trying to paint those emblems, i hate even trying to dry my car around where the emblems are (if i had any i mean)
oh and good luck trying to paint those emblems, i hate even trying to dry my car around where the emblems are (if i had any i mean)
#3529
^hmmm, what do you think i should do with my emblems (besides put them on my trunk). I just thought of this as i was reading your post, cuz i have 2 full sets of emblems for the trunk (1 used, 1 brand new).....
oh and good luck trying to paint those emblems, i hate even trying to dry my car around where the emblems are (if i had any i mean)
oh and good luck trying to paint those emblems, i hate even trying to dry my car around where the emblems are (if i had any i mean)
or you can put em in your grill or something
#3530
i like acura
^ hahaha true, but i dont know man, i really dont wana take it off and then have the headache of putting them bak all lined up and shit. so imma use my artist skills and slowly black out the emblems in the back, and as far as the grill goes, shouldnt be a problem since its a bigger piece.
#3531
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
#3532
Registered Abuser
Join Date: Dec 2008
Location: Peggy's Cove, Nova Scotia, Canada
Age: 34
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Now I'm stuck with the outline of the badges until I paint my car I suppose. Anyone know of a why to clean that up? I've tried numerous wipes/goo gone and similar products. :thumbsdow
Then again, maybe that was just the amount the paint had faded and he couldnt help that?
#3533
W WHIP.
Join Date: Jun 2006
Location: 412, PA & always ballin in FLO RIDA.
Age: 35
Posts: 3,859
Likes: 0
Received 1 Like
on
1 Post
^ hahaha true, but i dont know man, i really dont wana take it off and then have the headache of putting them bak all lined up and shit. so imma use my artist skills and slowly black out the emblems in the back, and as far as the grill goes, shouldnt be a problem since its a bigger piece.
#3534
W WHIP.
Join Date: Jun 2006
Location: 412, PA & always ballin in FLO RIDA.
Age: 35
Posts: 3,859
Likes: 0
Received 1 Like
on
1 Post
Yeah, thats half risky. I'd take them off just to make sure you dont touch the paint on your car. If you do, make sure to do it right though, the previous owner of my car had no sweet clue how to tie his own shoes...check out the debadging job he did on my car
Now I'm stuck with the outline of the badges until I paint my car I suppose. Anyone know of a why to clean that up? I've tried numerous wipes/goo gone and similar products. :thumbsdow
Then again, maybe that was just the amount the paint had faded and he couldnt help that?
Now I'm stuck with the outline of the badges until I paint my car I suppose. Anyone know of a why to clean that up? I've tried numerous wipes/goo gone and similar products. :thumbsdow
Then again, maybe that was just the amount the paint had faded and he couldnt help that?
#3535
CL in lawnmower status
^agreed, try a polish with a buffer, or just look for the threads about failed debaging and get some advice from there
btw it looks like the paint underneath the badges are way better than the rest of the paint on your trunk
btw it looks like the paint underneath the badges are way better than the rest of the paint on your trunk
#3536
Registered Abuser
Join Date: Dec 2008
Location: Peggy's Cove, Nova Scotia, Canada
Age: 34
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
yeah the threads say pretty much the same, buff buff buff. Ill try that asap. Yeah mitch, Im pretty sure the two prev. owners never stored this car...ever haha
#3537
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
That's clean paint underneath, you need to get the rest of your paint to the same condition, looks like hazing in the pics, I would def use an abrassive polish and try to buff down that haze, also may want to claybar it before you wax to try and clean the paint as much as possible, I have shadows like that, but you can't see them as long as there is a coat of wax/polish on the car.
#3539
CL in lawnmower status
#3540
Skuuuurrrrrt!
iTrader: (1)
Javed is selling his window reg. Pretty sure he'll ship it to Canada.
Don't know if I'm supposed to do this but.. https://acurazine.com/forums/showthr...943&highlight=
Don't know if I'm supposed to do this but.. https://acurazine.com/forums/showthr...943&highlight=
Last edited by GhettoNinja06; 01-08-2009 at 11:53 AM.
#3541
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
You're allowed to link to a sale thread, just not start new threads about it, and since it's not even your sale, you're good to go
#3542
CL in lawnmower status
Javed is selling his window reg. Pretty sure he'll ship it to Canada.
Don't know if I'm supposed to do this but.. https://acurazine.com/forums/showthr...943&highlight=
Don't know if I'm supposed to do this but.. https://acurazine.com/forums/showthr...943&highlight=
i was thinking bout picking that one up incase the passenger side window reg breaks too
EDIT: so if anyone has a brand new cl driver's side window regulator and is willing to ship to canada let me know
Last edited by mitch14; 01-08-2009 at 12:24 PM.
#3543
joe rocks c2s :D
Join Date: Aug 2008
Location: Davis - San Jose
Posts: 815
Likes: 0
Received 0 Likes
on
0 Posts
jesus...birds just crapped on my car. it was super dark and THICK!!! there were so many cars parked next beside me too...maybe it's cuz my car was white, but yeah, i'm just venting cuz it took me 45 min to wash that crap off
#3545
Yeah, thats half risky. I'd take them off just to make sure you dont touch the paint on your car. If you do, make sure to do it right though, the previous owner of my car had no sweet clue how to tie his own shoes...check out the debadging job he did on my car
Now I'm stuck with the outline of the badges until I paint my car I suppose. Anyone know of a why to clean that up? I've tried numerous wipes/goo gone and similar products. :thumbsdow
Then again, maybe that was just the amount the paint had faded and he couldnt help that?
Now I'm stuck with the outline of the badges until I paint my car I suppose. Anyone know of a why to clean that up? I've tried numerous wipes/goo gone and similar products. :thumbsdow
Then again, maybe that was just the amount the paint had faded and he couldnt help that?
ill get a repaint later when i get more SCRILLA.
#3547
N00berator
#3552
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
#3553
N00berator
it seriously does, i wana take off the 'A' but i wana black it out and out it bak...it has two holes right so it wouldnt be or look bad when i put it back on the trunk. Or is there anything i gotta use when putting it back on...
#3554
take off everything. paint the center A emblem black and then stick it back on with double sided tape
#3558
My door isn't shutting right, I have to basically slam it shut every time I get out of the car. The handle on the inside tends to stick in the open position also so I have to make sure the doors lock. Do you think it's something that could be adjusted?
#3559
Senior Moderator
it might be something that just needs to be lubricated, i had to do that periodically when i had shaved door handles on my last CL