AcuraZine - Acura Enthusiast Community
The intake pipe is very close to the anterior RV6 v3 precat. Thoughtfully, Andy Gerzina over at Gerzy Bear Performance included an 1800F heat shield to keep all the temps cool.
The intake pipe is very close to the anterior RV6 v3 precat. Thoughtfully, Andy Gerzina over at Gerzy Bear Performance included an 1800F heat shield to keep all the temps cool.
0 2019/03/09 12:49:11
Test fitting the intake manifold
Test fitting the intake manifold
0 2019/03/09 12:49:03
Went to Home Depot to get two bolts to use as washers between the two parts of the passenger side mount.
Went to Home Depot to get two bolts to use as washers between the two parts of the passenger side mount.
0 2019/03/09 12:48:53
Using this Holley E85 tester it shows that the fuel is E85/E86. Perfect for a tune!
Using this Holley E85 tester it shows that the fuel is E85/E86. Perfect for a tune!
0 2019/03/09 12:40:18
Went to the local E85 station for the Rotrex TLs first taste of fermented blueberry fuel. Bought 18 gallons for the tuning process.
Went to the local E85 station for the Rotrex TLs first taste of fermented blueberry fuel. Bought 18 gallons for the tuning process.
0 2019/03/09 12:40:10
Clutch valve delete in progress.
Clutch valve delete in progress.
0 2019/03/09 12:40:02
0 2019/03/09 12:39:53
Pouring in ACDelco manual transmission fluid
Pouring in ACDelco manual transmission fluid
0 2019/03/09 12:39:44
Clutch valve delete
Clutch valve delete
0 2019/03/09 12:39:36
A few dealer brochures for the Acura shrine.
A few dealer brochures for the Acura shrine.
0 2019/03/09 12:35:36
AC Delco w/ friction modifiers is a must for 6MT TLs.
AC Delco w/ friction modifiers is a must for 6MT TLs.
0 2019/03/09 12:35:28
Got a blue faux carbon fiber Acura watch.
Got a blue faux carbon fiber Acura watch.
0 2019/03/09 12:35:19
Helping a friend change his timing belt.
Helping a friend change his timing belt.
0 2019/03/09 12:32:42
Got an Acura laptop bag and parts service watch.
Got an Acura laptop bag and parts service watch.
0 2019/03/09 12:32:30
Front moun
Front moun
0 2019/03/09 12:32:21
Check out that fitment!
Check out that fitment!
0 2019/03/09 12:28:47
New passenger side mount
New passenger side mount
0 2019/03/09 12:28:42
0 2019/03/09 12:28:34
Old passenger side mount
Old passenger side mount
0 2019/03/09 12:28:26
Good fitment
Good fitment
0 2019/03/09 12:28:18
Test fitting the front mount.
Test fitting the front mount.
0 2019/03/09 12:28:08
0 2019/03/09 12:27:09
Would flying these look tacky at an event?
Would flying these look tacky at an event?
0 2019/03/09 12:21:06
Cleaning up the engine bay on the Comptech. Going to be fun cruising both the S/C’d TLs.
Cleaning up the engine bay on the Comptech. Going to be fun cruising both the S/C’d TLs.
0 2019/03/09 12:20:57
Use the “Vrr-ing” technique to preset the return line fuel regulator to 55psi.
Use the “Vrr-ing” technique to preset the return line fuel regulator to 55psi.
0 2019/03/09 10:58:42
All -6an fuel return lines connected and propositioned.
All -6an fuel return lines connected and propositioned.
0 2019/03/09 10:58:33
Had a minor fuel leak when testing the upgraded fuel system. This 90 coupling had a leak right there. I untightened/retightened and it sealed well. To test the fuel system: With the key in the ignition turn your key to the setting just before starting your car. You will hear a Vrrr-ing of the fuel pump in the rear. This will prime the fuel lines.
Had a minor fuel leak when testing the upgraded fuel system. This 90 coupling had a leak right there. I untightened/retightened and it sealed well. To test the fuel system: With the key in the ignition turn your key to the setting just before starting your car. You will hear a Vrrr-ing of the fuel pump in the rear. This will prime the fuel lines.
0 2019/03/09 10:58:24
0 2019/03/09 09:04:32
Remov
Remov
0 2019/03/09 09:04:23
Remove those two bolts, x4 bolts connecting the mount to the subframe, and finally the single top bolt. use a price od wood and an emergency jackstand under the oil pan to keep the engine in place.
Remove those two bolts, x4 bolts connecting the mount to the subframe, and finally the single top bolt. use a price od wood and an emergency jackstand under the oil pan to keep the engine in place.
0 2019/03/09 09:04:15
Did the throttle body delete because it will heat up the Intake manifold, where it would otherwise be cooler with race gas.
Did the throttle body delete because it will heat up the Intake manifold, where it would otherwise be cooler with race gas.
0 2019/03/09 09:04:06
I was impressed when I for saw this on mnborg’s GBP Rotrex build!
I was impressed when I for saw this on mnborg’s GBP Rotrex build!
0 2019/03/09 09:03:58
Innovative mounts arrived!
Innovative mounts arrived!
0 2019/03/09 09:03:49
Install the two aluminum check valves like so.
Install the two aluminum check valves like so.
0 2019/03/09 09:03:43
Make sure to face the open portion of these two parts towards the Intake Manifold.
Make sure to face the open portion of these two parts towards the Intake Manifold.
0 2019/03/09 09:03:39
Switching to RV6 v3 Straight pipes and ATLP third cat straight pipe. No powder coating because the E85 fuel burns cooler.
Switching to RV6 v3 Straight pipes and ATLP third cat straight pipe. No powder coating because the E85 fuel burns cooler.
0 2019/03/09 08:57:37
OEM and Aftermarket comparison.
OEM and Aftermarket comparison.
0 2019/03/09 08:57:28
0 2019/03/09 08:57:20
0 2019/03/09 08:57:12
Took a long time to birth the rear oem Precat.
Took a long time to birth the rear oem Precat.
0 2019/03/09 08:57:03