AcuraZine - Acura Enthusiast Community
Good fitment
Good fitment
0 2019/03/09 12:28:18
More space to work.
More space to work.
0 2019/01/01 20:46:18
Old passenger side mount
Old passenger side mount
0 2019/03/09 12:28:26
0 2019/03/09 12:28:34
I cut rubber strips to put over the contact points of the radiator.
I cut rubber strips to put over the contact points of the radiator.
0 2019/01/01 20:46:18
New passenger side mount
New passenger side mount
0 2019/03/09 12:28:42
This is how they will sit.
This is how they will sit.
0 2019/01/01 20:46:18
Check out that fitment!
Check out that fitment!
0 2019/03/09 12:28:47
0 2019/01/01 20:59:39
Front moun
Front moun
0 2019/03/09 12:32:21
0 2019/01/01 20:59:40
Got an Acura laptop bag and parts service watch.
Got an Acura laptop bag and parts service watch.
0 2019/03/09 12:32:30
0 2019/01/01 20:59:41
Helping a friend change his timing belt.
Helping a friend change his timing belt.
0 2019/03/09 12:32:42
0 2019/01/01 20:59:41
0 2019/01/01 20:59:41
Got a blue faux carbon fiber Acura watch.
Got a blue faux carbon fiber Acura watch.
0 2019/03/09 12:35:19
AC Delco w/ friction modifiers is a must for 6MT TLs.
AC Delco w/ friction modifiers is a must for 6MT TLs.
0 2019/03/09 12:35:28
Used a washer piece off the Comptech sports supercharger to make a gap for the Rotrex radiator mount bracket.
Used a washer piece off the Comptech sports supercharger to make a gap for the Rotrex radiator mount bracket.
0 2019/01/01 21:03:08
A few dealer brochures for the Acura shrine.
A few dealer brochures for the Acura shrine.
0 2019/03/09 12:35:36
I changed the position of the clamps on the Rotrex reservoir to more evenly distribute its weight on the mounting bracket and reduce vibrational movement.
I changed the position of the clamps on the Rotrex reservoir to more evenly distribute its weight on the mounting bracket and reduce vibrational movement.
0 2019/01/01 21:03:10
Clutch valve delete
Clutch valve delete
0 2019/03/09 12:39:36
Rotrex radiator back in. This time with rubber spacers for vibration absorbsion and barrier between the two metals.
Rotrex radiator back in. This time with rubber spacers for vibration absorbsion and barrier between the two metals.
0 2019/01/01 21:03:27
Pouring in ACDelco manual transmission fluid
Pouring in ACDelco manual transmission fluid
0 2019/03/09 12:39:44
Remove the two plastic protectors on the sides of the rsdiator.
Remove the two plastic protectors on the sides of the rsdiator.
0 2019/01/01 21:09:45
0 2019/03/09 12:39:53
This is the new vent hole where the windshield washer reservoir was. Since I won’t drive the car in the rain, no reason for the fluid?
This is the new vent hole where the windshield washer reservoir was. Since I won’t drive the car in the rain, no reason for the fluid?
0 2019/01/01 21:09:46
Clutch valve delete in progress.
Clutch valve delete in progress.
0 2019/03/09 12:40:02
I turned hose clamp worm bodies upwards to make a solid base for the rubber barrier.
I turned hose clamp worm bodies upwards to make a solid base for the rubber barrier.
0 2019/01/01 21:09:47
Went to the local E85 station for the Rotrex TLs first taste of fermented blueberry fuel. Bought 18 gallons for the tuning process.
Went to the local E85 station for the Rotrex TLs first taste of fermented blueberry fuel. Bought 18 gallons for the tuning process.
0 2019/03/09 12:40:10
Rubber spacer
Rubber spacer
0 2019/01/01 21:09:50
Using this Holley E85 tester it shows that the fuel is E85/E86. Perfect for a tune!
Using this Holley E85 tester it shows that the fuel is E85/E86. Perfect for a tune!
0 2019/03/09 12:40:18
Looks better.
Looks better.
0 2019/01/01 21:15:41
Removed the cap to tighten the banjo bolt. Place hose clamp in up position and tighten.
Removed the cap to tighten the banjo bolt. Place hose clamp in up position and tighten.
0 2019/01/01 21:15:44
The firewall comes forward at an angle. In order to make the manifold aim more straight forward, I belt the bracket.
The firewall comes forward at an angle. In order to make the manifold aim more straight forward, I belt the bracket.
0 2019/01/01 21:15:44
Went to Home Depot to get two bolts to use as washers between the two parts of the passenger side mount.
Went to Home Depot to get two bolts to use as washers between the two parts of the passenger side mount.
0 2019/03/09 12:48:53
Put all the the ducks in a row in this corner. All tightened down.
Put all the the ducks in a row in this corner. All tightened down.
0 2019/01/01 21:15:44
Test fitting the intake manifold
Test fitting the intake manifold
0 2019/03/09 12:49:03
Removed the psi gage while I test fit.
Removed the psi gage while I test fit.
0 2019/01/01 21:15:45
The intake pipe is very close to the anterior RV6 v3 precat. Thoughtfully, Andy Gerzina over at Gerzy Bear Performance included an 1800F heat shield to keep all the temps cool.
The intake pipe is very close to the anterior RV6 v3 precat. Thoughtfully, Andy Gerzina over at Gerzy Bear Performance included an 1800F heat shield to keep all the temps cool.
0 2019/03/09 12:49:11