Edmonton Acuraziner's
#2641
Burning Brakes
#2645
TL'er
iTrader: (1)
Join Date: Jul 2011
Location: Edmonton
Age: 33
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Don't really like the look of their exhaust, The stock Dual look really nice, But there is little sound to them. I'm interested in Greddy cause nobody has it cause it seems "Ricey" but sounds good when combined with some other parts.
That video was a good comparison. I Ordered one of those two, So many parts coming in for in right now. Not looking forward to paying the Broker/GST when these arrive!
That video was a good comparison. I Ordered one of those two, So many parts coming in for in right now. Not looking forward to paying the Broker/GST when these arrive!
#2646
First batch of parts from HeelToe came in. Also got some group-buy items before the listed deadline. Skunk2 front camber kit, Ingalls rear camber, CT-Engineering short shifter, Hybird Racing shifter bushings, FLP high flow cat, NGK laser iridium spark plugs.
#2647
Pro
Thread Starter
@Mitchell - The KBP TL-S I detailed this past summer had the greddy exhaust. That thing was quite loud.
@EdmTSX - Getting parts in is always such a nice feeling lol. I feel like a kid in a candy store whenever I get to open up a box that contains parts or supplies.
@EdmTSX - Getting parts in is always such a nice feeling lol. I feel like a kid in a candy store whenever I get to open up a box that contains parts or supplies.
#2649
Suzuka Master
iTrader: (4)
look on youtube what it sounds like. Personally, I wouldn't buy that for a type s. Type s has dual tip and I would stick with that. I also wouldn't even buy an exhaust for this car, I would get it custom made for cheaper, but that's just me. All exhaust is, is piping and mufflers. I priced out an exhaust for my TL and it came at 650$ with dual tips, magnaflow mufflers (never heard those sound bad), and properly bent piping and welding from an exhaust shop localy. There is plenty of TLs running magnaflow setup and they all sound sexy as hell.
#2650
I've listened to a few of those TL exhaust sounds on youtube this past year, always liked the sound of the TLs. From the videos, I personally like the ATLP quad exhaust look and sound, magna flow ( what myron suggested), the greddy is ok and even on a TSX it's super loud (heard it in person when I bought parts off a guy in Vancouver) If you are too lazy to find the videos, here you go!
#2657
@Mitchell - Nice pick up! I remember watching that video too, sounds sick.
What low profile/floor jacks do you guys use? I need to pick one up that will go higher than 14" so I can use my jack stands and install my High Flow Cat..
What low profile/floor jacks do you guys use? I need to pick one up that will go higher than 14" so I can use my jack stands and install my High Flow Cat..
#2658
Pro
I have the one from canadian tire, motomaster i believe. It's low pro but it barely cleared my car when I installed my jpipe. It's not going to raise it that much so you have to play with jackstands
#2659
Pro
Thread Starter
@Mitchell - Yeah I'm not a big fan of the sound the Greddy exhaust puts out. The custom magnaflow exhaust sounds the best to me. I saw that video a while ago and almost pulled the trigger on an exhaust but again, won't be doing performance upgrades for this ride.
Also, saw your sig saying you sold the NBP. Nice!
@Arthur - WELL DONE! It's time for a black roof now lol.
@EdmTSX - I have this one : http://www.princessauto.com/pal/prod...eel-Floor-Jack
It's low profile but doesn't raise the rear high enough to put the jack stands on. When I swapped to winter tires, I had to do the rears one side at a time. I can't go back to a steel one after using an aluminum one. The weight difference is ridiculous.
Also, saw your sig saying you sold the NBP. Nice!
@Arthur - WELL DONE! It's time for a black roof now lol.
@EdmTSX - I have this one : http://www.princessauto.com/pal/prod...eel-Floor-Jack
It's low profile but doesn't raise the rear high enough to put the jack stands on. When I swapped to winter tires, I had to do the rears one side at a time. I can't go back to a steel one after using an aluminum one. The weight difference is ridiculous.
#2660
Thanks for the suggestions, I went to Costco today and bought a Torin 2.5 Ton Aluminum low-profile floor jack for $100. Raises it up to 18", my jack stands are minimum 14" so it works for me lol
http://www.costco.ca/Browse/Product....524&lang=en-CA
anyone want to install my camber/teins for me? :P
http://www.costco.ca/Browse/Product....524&lang=en-CA
anyone want to install my camber/teins for me? :P
Last edited by EdmTSX; 03-10-2012 at 07:05 PM.
#2662
TL'er
iTrader: (1)
Join Date: Jul 2011
Location: Edmonton
Age: 33
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Soo after installing my JPipe over the weekend, Don't really notice a big difference, You can feel the gains at 5k rpm. Also can see how better the flow is when revving gains/drops quicker.
Got a "Lowering Device" on its way to me now!
Sidenote, Should have a Wintermode meet. We can do comparisons to see who has the best winter tires? haha
Got a "Lowering Device" on its way to me now!
Sidenote, Should have a Wintermode meet. We can do comparisons to see who has the best winter tires? haha
#2663
Pro
Thread Starter
O rly? Which "lowering device" did you get? I've been tempted to switch my winter tires off but the temperatures are still a bit cool in the morning and night. Plus there are still the random warnings here and there of snowfall overnight lol.
#2664
TL'er
iTrader: (1)
Join Date: Jul 2011
Location: Edmonton
Age: 33
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking about switching mine off too. Drove through the worst part of the winter with them why stop now haha.
Was looking into air ride but didn't wanna pay the price for.
Got some nice coils can go 3" down and adjustable, who can guess? :}
Was looking into air ride but didn't wanna pay the price for.
Got some nice coils can go 3" down and adjustable, who can guess? :}
#2667
Suzuka Master
iTrader: (4)
Why Recycle?What Can I Recycle?What Can't I Recycle?What Is An Eco Station?StatisticsResourcesWhat is an ECO station?Household products that are poisonous, corrosive or flammable can be harmful to your health and the environment. You can dispose of them properly at our city's two ECO stations. They accept most household hazardous waste free of charge including:
•cleaning products and disinfectants
•pesticides and fertilizers
•propane and butane tanks
•partially full aerosol cans
•computers
•paints and thinners
•automotive waste like car batteries, antifreeze, solvents, oil filters, and engine oil
•fluorescent tubes and incandescent bulbs
•dry cell batteries
Edmonton ECO Station Location/Hours
South Location: 5150 99 Street (enter from 99 Street only)
North-West Location: 11440 143 Street
Tuesday-Saturday: 9:00 am - 4:30 pm
Closed Sunday, Monday, and stat holidays.
•cleaning products and disinfectants
•pesticides and fertilizers
•propane and butane tanks
•partially full aerosol cans
•computers
•paints and thinners
•automotive waste like car batteries, antifreeze, solvents, oil filters, and engine oil
•fluorescent tubes and incandescent bulbs
•dry cell batteries
Edmonton ECO Station Location/Hours
South Location: 5150 99 Street (enter from 99 Street only)
North-West Location: 11440 143 Street
Tuesday-Saturday: 9:00 am - 4:30 pm
Closed Sunday, Monday, and stat holidays.
#2668
Pro
Thread Starter
My guess would be, the new XLR8 coilovers?
#2670
Pro
Thread Starter
Mitchell are you going to get your coils installed at Ricky's shop again? If so, hit me up and maybe I can join in and get mine installed at the same time
#2671
Suzuka Master
iTrader: (4)
There is a thread about the season opened meet, any of you guys going? I am going just to see some nice cars, but most of you should go and show off your cars. I think it's on May 5th
- VINCE - you should install those coils and slam that sucker to the ground, and run those wide spacers you have with stock wheels, sexy
- VINCE - you should install those coils and slam that sucker to the ground, and run those wide spacers you have with stock wheels, sexy
#2676
Pro
Thread Starter
I won't be able to make the meet since I'll be on vacation.
Haha yeah I'm going to see if I can get by with a 1 finger gap and throw all four spacers on. I'd drive it for a few days and see how drive able it is being slammed. I already spot a crap load of pot holes all over the place
I'll definitely be doing the front grille delete this summer. Will be ordering the grille and CF vinyl from metrorestyling soon.
Does anyone have a soldering iron? I got my resistor and rear LEDs in. I want to see if soldering back in the OEM resistor will fix my interior light issue and if the 0.22ohm resistor will prevent hyperflashing when I have switchbacks up front and leds in the rear.
#2678
Burning Brakes
#2679
TL'er
iTrader: (1)
Join Date: Jul 2011
Location: Edmonton
Age: 33
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Vince- Ricky & Me work in same shop, Hes about 100x more knowledgeable about all this then I am though, and has all right tools
780Tuner is the Edmonton rice files to but it short