Edmonton Acuraziner's
#5402
#5403
6MT
#5404
TL Owner
@07NPB-S - yeah what Sejanus said, other then noise a full good quality catback exhaust system can really free up those exhaust gases. The XLR8 quads I have on is pretty much a straight pipe, no resonators.
My old 3G I was lowered 2 inches and I was fine, of course drive carefully but you shouldn't have any issues.
@Tai - damn, well from what I can see doesn't look too bad. Just the front bumper, hood, passenger headlight and fender and maybe the rad support?
@dctls08 - Yes lets still aim for the 29th, I'll be on vacation the week after lol
My old 3G I was lowered 2 inches and I was fine, of course drive carefully but you shouldn't have any issues.
@Tai - damn, well from what I can see doesn't look too bad. Just the front bumper, hood, passenger headlight and fender and maybe the rad support?
@dctls08 - Yes lets still aim for the 29th, I'll be on vacation the week after lol
Last edited by ArenHam; 06-19-2014 at 12:39 AM.
#5405
New to this page, but ive been a acura tl owner for a year now. My name is Cyprian and i guess i represent the northside haha. My tl is an 06, ive got exhaust done and also cold air intake, windows tinted, hoping to get rims and coilovers this summer though.
#5407
TL Owner
@polishacura - welcome, please don't tell me your car is a white base TL with quad exhaust tops that don't fit the base rear bumper. I was driving on the henday and literally the ugliest beat up white TL I have ever seen tried to race me.
Anyways guys don't forget this Sunday at 4pm is the car meet. For those that don't know the Tim Hortons just off whyte near United Cycle.
Anyways guys don't forget this Sunday at 4pm is the car meet. For those that don't know the Tim Hortons just off whyte near United Cycle.
#5408
Intermediate
Not going to ship them so if anyone needs any rotors/brakes or brake lines.
http://www.kijiji.ca/v-other-auto-pa...ines/605823266
Is anyone with an aftermarket exhaust going to the meet? Would love to hear it in person lol
http://www.kijiji.ca/v-other-auto-pa...ines/605823266
Is anyone with an aftermarket exhaust going to the meet? Would love to hear it in person lol
#5409
Not going to ship them so if anyone needs any rotors/brakes or brake lines.
http://www.kijiji.ca/v-other-auto-pa...ines/605823266
Is anyone with an aftermarket exhaust going to the meet? Would love to hear it in person lol
http://www.kijiji.ca/v-other-auto-pa...ines/605823266
Is anyone with an aftermarket exhaust going to the meet? Would love to hear it in person lol
#5410
Burning Brakes
I just got my car back from the mechanic, after having both fogs (housings) and my passenger side headlight (also housing) replaced. My mechanic chose not to replace my driver's side HID bulb...seems it was too much of a PITA. He claimed the old bulb was fine, and colour was the same. He's wrong.
Any suggestion on who to take the car to for something like this? The sevice manual says the wheel and inner fender have to come off to change the bulbs. It's been suggested to me to go to a "retrofitter"...I have no idea what that is.
Any suggestion on who to take the car to for something like this? The sevice manual says the wheel and inner fender have to come off to change the bulbs. It's been suggested to me to go to a "retrofitter"...I have no idea what that is.
#5412
Suzuka Master
iTrader: (4)
I just got my car back from the mechanic, after having both fogs (housings) and my passenger side headlight (also housing) replaced. My mechanic chose not to replace my driver's side HID bulb...seems it was too much of a PITA. He claimed the old bulb was fine, and colour was the same. He's wrong.
Any suggestion on who to take the car to for something like this? The sevice manual says the wheel and inner fender have to come off to change the bulbs. It's been suggested to me to go to a "retrofitter"...I have no idea what that is.
Any suggestion on who to take the car to for something like this? The sevice manual says the wheel and inner fender have to come off to change the bulbs. It's been suggested to me to go to a "retrofitter"...I have no idea what that is.
#5413
TL Owner
#5414
#5415
Racer
I just got my car back from the mechanic, after having both fogs (housings) and my passenger side headlight (also housing) replaced. My mechanic chose not to replace my driver's side HID bulb...seems it was too much of a PITA. He claimed the old bulb was fine, and colour was the same. He's wrong.
Any suggestion on who to take the car to for something like this? The sevice manual says the wheel and inner fender have to come off to change the bulbs. It's been suggested to me to go to a "retrofitter"...I have no idea what that is.
Any suggestion on who to take the car to for something like this? The sevice manual says the wheel and inner fender have to come off to change the bulbs. It's been suggested to me to go to a "retrofitter"...I have no idea what that is.
#5416
Racer
On another note do any of you guys have a recommendation on a good detailing shop in town? Especially for a black vehicle. The old girl needs a polish and wax job. Thanks
#5417
Suzuka Master
iTrader: (4)
This is all his work, take a look at his threads, he posts a few pics of it:
http://forums.780tuners.com/forumdis...Auto-Detailing
also on instagram @goranautodetailing
his number is 780-217-8762, shoot him a text or call him and tell him that Miran gave you his number.
The following users liked this post:
TJ Zooker (06-26-2014)
#5418
Burning Brakes
Do it yourself, really easy. I would replace both bulbs with new ones. Get them from thretrofitsource.com. Pop the black clips in your wheel well and peel back the plastic. You'll be able to the the fog housing no problem. Then just hook up the new bulbs. Pretty sure there's some diy on this forum.
#5420
Racer
Thanks Myron!
Sockpuppet - did mine with the wheel on, even swaped out a busted fog light housing. As long as you don't have tree trunks for arms you should be ok. Just crank the wheel outta the way. Or like Myron said just jack it up and take the wheel off. An impact gun is your friend
Sockpuppet - did mine with the wheel on, even swaped out a busted fog light housing. As long as you don't have tree trunks for arms you should be ok. Just crank the wheel outta the way. Or like Myron said just jack it up and take the wheel off. An impact gun is your friend
#5421
Burning Brakes
Thanks Myron!
Sockpuppet - did mine with the wheel on, even swaped out a busted fog light housing. As long as you don't have tree trunks for arms you should be ok. Just crank the wheel outta the way. Or like Myron said just jack it up and take the wheel off. An impact gun is your friend
Sockpuppet - did mine with the wheel on, even swaped out a busted fog light housing. As long as you don't have tree trunks for arms you should be ok. Just crank the wheel outta the way. Or like Myron said just jack it up and take the wheel off. An impact gun is your friend
#5422
Racer
It's certainly do-able, but I'd need to get my hands on a torque wrench, as I understand Hondas are very finicky that way...and I really don't wish to buy a torque wrench for the one time I'll use it. Ultimately, however, I think that's what I'm going to have to do.
I think we're talking about different things, here. The fogs are fine. What I need to replace is the HID (low beam).
I think we're talking about different things, here. The fogs are fine. What I need to replace is the HID (low beam).
#5423
Hey! I'm new to the site and have a black 2013 ILX Dynamic. I see a lot of TLs around, but have spotted a few black ILXs… will likely be pretty active on the site and interested in meets. Just waiting to get past the probation stage so i can post some pics, etc.
#5425
TL Owner
#5426
Instructor
#5429
https://acurazine.com/forums/members/v%7Cnsan%7Cty-285491/
#5430
Suzuka Master
iTrader: (4)
Actually a fellow TL member, Vinsanity does a very good job detailing as well, hit him up
https://acurazine.com/forums/members/v%7Cnsan%7Cty-285491/
https://acurazine.com/forums/members/v%7Cnsan%7Cty-285491/
#5431
Suzuka Master
iTrader: (4)
torque wrench? Nah man, just tighten with a wrench Acura gave you. I never had one, nor needed one for that (bolting up spacers included). If they designed a car that you only need a torque wrench for changing tires, they would put one in your trunk. People are way over thinking the smallest things. I am a mechanical engineer, trust me haha
#5434
Advanced
Im in for sunday.
Does anyone know what i would do to fix my rims ( my waffles)? They have bad curb damage from previous owner. I can take pics if needed. I want to fully restore them and make them look like new. I think it would be cheaper to restore my rims than buy some new rims altogether.
#5437
Cruisin'
Been a while lol. My RSX is parked/dead so in the meantime Im picking up this sleeper tonight;
4.2L supercharged Stroker, ported heads, cams, straight piped and a few other goodies. Should be fun! :weeeeeeeeee:
4.2L supercharged Stroker, ported heads, cams, straight piped and a few other goodies. Should be fun! :weeeeeeeeee: