LED turn signal bulb
#1
Intermediate
Thread Starter
LED turn signal bulb
Hi azine members,
I have just replaced my turn signal bulb with LED 50W power and I noticed the bulbs are brighter than my headlights.
Should I change my headlights to brighter one or equivalent to the turn signals ?
Let me know how you all think !
I have just replaced my turn signal bulb with LED 50W power and I noticed the bulbs are brighter than my headlights.
Should I change my headlights to brighter one or equivalent to the turn signals ?
Let me know how you all think !
#3
Senior Moderator
and your dome and courtesy lights and your map lights and license plate lights...
you can't let your front turn signal take away the thunder from the rest of your car!!!
you can't let your front turn signal take away the thunder from the rest of your car!!!
#5
Senior Moderator
oh and those damn vanity lights... those are the worst to remove..
#6
Drifting
They don't look brighter to me in the pics...just a higher temp with a more blue/purple hue.
And they aren't 50W LEDs. If you plugged in something to that socket that pulled 50W, you would melt the socket and/or harness.
And they aren't 50W LEDs. If you plugged in something to that socket that pulled 50W, you would melt the socket and/or harness.
#7
Senior Moderator
When they state 50w, they're saying that it is comparable to an incandescent bulb running at 50w from a luminosity perspective. LEDs draw considerably less power while also are brighter..
The following users liked this post:
LoveMyTL-S (02-03-2021)
Trending Topics
#11
Acura tl lights
Okay so I've been reading and researching but I haven't found anybody with the similar problem. I just got my acura this last christmas. It came with a headlight out. Then the driver side quite working (fog, headlight) So basically I ordered new hid bulbs for my headlights and new fog light too. So I replaced all the lights and when put back together I have both fog lights but now I have no headlights. This makes no sense.. I'm so confused, and yes I've checked fuses bulbs again please help
#12
Is everything plugged in? Igniter correctly secured to the HID bulb? Did you get some decent bulbs or some ebay garbage?
Get to the ballast plug, check if it's receiving 12V, use test light not a voltmeter.
Get to the ballast plug, check if it's receiving 12V, use test light not a voltmeter.
Thread
Thread Starter
Forum
Replies
Last Post
demolition_x
2G TL (1999-2003)
3
04-16-2005 10:30 PM