A/C Refrigerant Pressure Chart for Acura
#1
Advanced
Thread Starter
A/C Refrigerant Pressure Chart for Acura
Does Acura have a specific R134a refrigerant pressure chart or are the generic ones floating around the net ok to use? Also what should the static pressure be in a "normal" 3rd gen TL A/C system (A/C not running).
#2
Suzuka Master
iTrader: (1)
Not really certain as to the static pressure as that is also ambient temperature dependent, but I'd say @ 90. Our '11 Turbo Kia was @ 100, at least that's what it read when I replaced the compressor, hot day.
The chart looks like normal values, but when the car was running (Turbo Kia again), I was able to get colder temps out of the system than what the chart indicates, but it's good for a reference.
Personally if doing the system over, I'd discharge, evacuate then add refrigerant by weight so one can know the correct amt. in the system.
The chart looks like normal values, but when the car was running (Turbo Kia again), I was able to get colder temps out of the system than what the chart indicates, but it's good for a reference.
Personally if doing the system over, I'd discharge, evacuate then add refrigerant by weight so one can know the correct amt. in the system.
#3
Advanced
Thread Starter
Thanks. Its about 67°F with 80% RH today so I got the pressure to low 25 and high 140. Enough to get the AC to cool. I'l probably have to replace the compressor later this year. I've already replaced a clutch and coil on it.
#6
Senior Moderator
The following users liked this post:
SteveHall (08-06-2023)
Thread
Thread Starter
Forum
Replies
Last Post
65 Fury Convert
1G CL (1997-1999)
4
08-18-2003 07:31 PM