AcuraZine Dallas/Ft.Worth Crew
#5721
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
a little walk down memory lane from the first Big As Texas meet in 2006.
https://docs.google.com/leaf?id=0Bwq...thkey=CO76_M0D
https://docs.google.com/leaf?id=0Bwq...thkey=CO76_M0D
I think it was beginning of 07....Jordan messed up on the date on that video
#5724
Drifting
In for one during this fall or next spring.
Oh and my damn car's falling apart. Looked around and noticed my transmission mount, pass. side engine mount, and these two cradle mounts, all completely broken through. Ordered all the parts already
Oh and my damn car's falling apart. Looked around and noticed my transmission mount, pass. side engine mount, and these two cradle mounts, all completely broken through. Ordered all the parts already
#5733
Chapter Leader (Southern Region)
take care of yourself.. strep has been going around down here.
#5736
Drifting
Yippeee! Got new rubber today. Michelin Pilot Super Sports, discount tire guy hooked it up for only 950 including installation and everything. Not bad at all. And changed the pass. engine mount which made this concerning noise go away yesterday.
#5738
Intermediate
Whats up DFW azine! i'm going to be honest with everyone and just let you guys know im a noob to the forum, but i have quit a few mods on my 2g TL-S. complete oem lip kit, rear eibach camber kit, ingalls front upper ball joints (currently waiting on my ingalls front upper adjustdable controll arms to come in), debadge, 10k 35 watt xenon low beams, 3k 35 watt ddm fogs, led interior lights, weather tech visors, and to top it all off slammed about a good 5 inches on some 18x9.5 + 15 offset mb battles. I got about -4 degrees camber in the front and -3.6 camber in rear, and this is my daily, i take it everywhere. Lol
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
#5742
Three Wheelin'
Whats up DFW azine! i'm going to be honest with everyone and just let you guys know im a noob to the forum, but i have quit a few mods on my 2g TL-S. complete oem lip kit, rear eibach camber kit, ingalls front upper ball joints (currently waiting on my ingalls front upper adjustdable controll arms to come in), debadge, 10k 35 watt xenon low beams, 3k 35 watt ddm fogs, led interior lights, weather tech visors, and to top it all off slammed about a good 5 inches on some 18x9.5 + 15 offset mb battles. I got about -4 degrees camber in the front and -3.6 camber in rear, and this is my daily, i take it everywhere. Lol ![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
#5748
Q('.')=O
iTrader: (1)
Anyone been to Taste of Addison in previous years? If so, how is it?
I'm going to go Saturday evening, mainly because 3EB is playing there. But would be nice to know about what to eat, if they have beer, etc.
I'm going to go Saturday evening, mainly because 3EB is playing there. But would be nice to know about what to eat, if they have beer, etc.
#5749
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
Ive been, its pretty cool. The only thing is it gets really fuckin packed.
The lines for every place to eat are going to be way long. Last year I didnt say very long because of that.
The lines for every place to eat are going to be way long. Last year I didnt say very long because of that.
#5750
Instructor
iTrader: (1)
AFC Neo help!!
Hey guys, I just got an AFC Neo for my TL, don't ask I already heard it all, anyways I decided to keep it just to tune the air/fuel MAP. I also purchased a PnP harness for it from boomslang. Anyways, to make a long story short, my VSA, traction, & check engine light are coming on. Oh yeah, and the car starts fine, but it won't rev past 3000rpms. Any solutions or any ideas on what could be the problem? I tried searching the thread and PMing other members who got this piggyback, but no replies yet. If worse comes to worse, I just may go to the dealership to have them read out the codes.
![Yuck](https://acurazine.com/forums/images/smilies/yuck.gif)
#5751
Three Wheelin'
If you want I have a code reader that will pull the codes. But you sure the wiring is hooked up right? I would make sure the setting in the AFC neo is zero'd out. Usually if that happens it will default to the ECU for control. But with any tampering with the ECU it will usually throw a few codes.
#5752
Instructor
iTrader: (1)
Its a PnP harness from boomslang, but yet im not sure if I trust them. I read in a previous thread, that a member on acurazine had the same problems, turned out to be that when they made his wire harness, one of the grounds with connected incorrectly. But yeah, I would love to borrow your code reader, if I can read the code maybe I can locate where the problem is & check the wiring to find out if its wired correctly.
#5753
So, if you haven't noticed the thread yet, CCM X is next month. And for once, it's in my neck of the woods (
). Anyway, if any of y'all plan on attending, I can try to get a number & ask Tiff to save us spots again. It will be at the very end of the George Bush Tollway, so it will be very easy to get to.
I'm also thinking afterward if anyone wants to do a small dinner gtg afterwards. There are a LOT if restaurants in that area, fast food & sit down. But, we can go anywhere, doesn't bother me.
So, give me a roll call, I'll message Tiff & maybe we'll have a repeat of CCM8.
![Snicker](https://acurazine.com/forums/images/smilies/emot-laugh.gif)
I'm also thinking afterward if anyone wants to do a small dinner gtg afterwards. There are a LOT if restaurants in that area, fast food & sit down. But, we can go anywhere, doesn't bother me.
So, give me a roll call, I'll message Tiff & maybe we'll have a repeat of CCM8.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#5755
Understandable. At least be sure to drop by RAC in the morning.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#5758
So, if you haven't noticed the thread yet, CCM X is next month. And for once, it's in my neck of the woods (
). Anyway, if any of y'all plan on attending, I can try to get a number & ask Tiff to save us spots again. It will be at the very end of the George Bush Tollway, so it will be very easy to get to.
I'm also thinking afterward if anyone wants to do a small dinner gtg afterwards. There are a LOT if restaurants in that area, fast food & sit down. But, we can go anywhere, doesn't bother me.
So, give me a roll call, I'll message Tiff & maybe we'll have a repeat of CCM8.![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Snicker](https://acurazine.com/forums/images/smilies/emot-laugh.gif)
I'm also thinking afterward if anyone wants to do a small dinner gtg afterwards. There are a LOT if restaurants in that area, fast food & sit down. But, we can go anywhere, doesn't bother me.
So, give me a roll call, I'll message Tiff & maybe we'll have a repeat of CCM8.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#5759
Burning Brakes
#5760
With that, what are y'all thinking about time wise? Mid October?