ATTENTION!! Calling all 562/310/714/626/818/323/213 SO-CAL PART V
11-30-2011, 10:50 AM
Drifting
Current projects: MDX grill and ron jon style grill.
Build pics
https://acurazine.com/forums/showthr...=839941&page=1
Still work in progress. MDX grill is 75% done. I still need to dremel the lower grill and fill in the hood gap.
Ron jon style grill is 20% done. I still need to create an outer frame and find some mesh.
Possible color schemes. Last pic is the ron jon style that's raised up a bit.
Build pics
https://acurazine.com/forums/showthr...=839941&page=1
Still work in progress. MDX grill is 75% done. I still need to dremel the lower grill and fill in the hood gap.
Ron jon style grill is 20% done. I still need to create an outer frame and find some mesh.
Possible color schemes. Last pic is the ron jon style that's raised up a bit.
11-30-2011, 11:11 AM
11-30-2011, 11:17 AM
11-30-2011, 12:40 PM
Current projects: MDX grill and ron jon style grill.
Build pics
https://acurazine.com/forums/showthr...=839941&page=1
Still work in progress. MDX grill is 75% done. I still need to dremel the lower grill and fill in the hood gap.
Ron jon style grill is 20% done. I still need to create an outer frame and find some mesh.
Possible color schemes. Last pic is the ron jon style that's raised up a bit.
Build pics
https://acurazine.com/forums/showthr...=839941&page=1
Still work in progress. MDX grill is 75% done. I still need to dremel the lower grill and fill in the hood gap.
Ron jon style grill is 20% done. I still need to create an outer frame and find some mesh.
Possible color schemes. Last pic is the ron jon style that's raised up a bit.
^This one looks best! try it out!
11-30-2011, 04:25 PM
COTM Coordinator
Current projects: MDX grill and ron jon style grill.
Build pics
https://acurazine.com/forums/showthr...=839941&page=1
Still work in progress. MDX grill is 75% done. I still need to dremel the lower grill and fill in the hood gap.
Ron jon style grill is 20% done. I still need to create an outer frame and find some mesh.
Possible color schemes. Last pic is the ron jon style that's raised up a bit.
Build pics
https://acurazine.com/forums/showthr...=839941&page=1
Still work in progress. MDX grill is 75% done. I still need to dremel the lower grill and fill in the hood gap.
Ron jon style grill is 20% done. I still need to create an outer frame and find some mesh.
Possible color schemes. Last pic is the ron jon style that's raised up a bit.
The following users liked this post:
n1njai (11-30-2011)
:
11-30-2011, 07:33 PM
11-30-2011, 08:56 PM
The following users liked this post:
n1njai (11-30-2011)
11-30-2011, 10:28 PM
11-30-2011, 10:30 PM
12-01-2011, 06:29 AM
Right??! Those things are a beauty. BTW fellas, what do u think about running BC coils on the 2G TL? I remember a dude from FL with those new work wheels had BC coils but idk if he liked them or not.
12-01-2011, 10:43 AM
I was gonna buy a set of BC coils for the 2G but i jumped on the F2
from my experience with BC coils on the genesis... I would buy them again. they were really nice. they should be the same as megans
from my experience with BC coils on the genesis... I would buy them again. they were really nice. they should be the same as megans
12-01-2011, 05:18 PM
I'm checking the BC Racing site and they have coils for the Accord so I guess I'll look into getting those. I'm not familiar with their spring rate system though, it says 62-200-10 and 62-220-5 kg/mm. Wut...
Edit: NVM, the 10 and 5 at the end of the sequential numbers are the spring rates, 10k and 5k. So these are fairly stiffer than the F2's which are at like 12k/8k right?
Edit: NVM, the 10 and 5 at the end of the sequential numbers are the spring rates, 10k and 5k. So these are fairly stiffer than the F2's which are at like 12k/8k right?
Last edited by n1njai; 12-01-2011 at 05:30 PM.
12-01-2011, 09:05 PM
Aren't you already on coils?
12-02-2011, 01:49 AM
Yeah but I want something stiffer so I don't bottom out as much. But meh, the more I look around the more I'm learning that the F2's are already one of the stiffest besides omnium powers which are barely stiffer in the rear.
12-02-2011, 08:59 AM
megan ez streets are 12kg F/5kg R
http://www.meganracing.com/product_d...d=988&catid=86
mike's 2g tsx in the background hahah
http://www.meganracing.com/product_d...d=988&catid=86
mike's 2g tsx in the background hahah
Last edited by xtremex626; 12-02-2011 at 09:02 AM.
12-02-2011, 11:10 AM
When I had the FF1 on the 3g.. it was WAY too stiff and annoying to drive daily
I can PM you the seller and price I got them for if interested
12-02-2011, 04:50 PM
justin, those ff1's should already be a stiff setup. ff1's are rated at 12kg F/ 6kg R, almost the same specs as my ez's. you're better off sticking with the ff1's. stiffen up your preload if you dont want to bottom out; worked for me.
12-02-2011, 11:45 PM
COTM Coordinator
Damn it Joshie..... I just creamed lol..
Im flying out to Memphis tomorrow at 6am and will be back Monday at 1030pm. We will have to set something up for next week for me to pick them up..
On a side note, the S13 is now boosted
Shit is ridiculous..... nuff said.
Im flying out to Memphis tomorrow at 6am and will be back Monday at 1030pm. We will have to set something up for next week for me to pick them up..
On a side note, the S13 is now boosted
Shit is ridiculous..... nuff said.
12-03-2011, 03:04 AM
boosted KA motor?
heard thats not even bad at all either..
12-03-2011, 11:39 AM
COTM Coordinator
Yeah I'm only at 6 pounds and whooped an SRT4 modded, eclipse gst modded, g35, 350z and a 325i that was a complete joke lol.
My ecu is tuned for 10psi safely. I gotta fix some boost leaks and my some colder spark plugs and ill be having a lot more fun.
My ecu is tuned for 10psi safely. I gotta fix some boost leaks and my some colder spark plugs and ill be having a lot more fun.
12-03-2011, 11:54 AM
sick.. i can't do anything straight line... haha
i've been having idle problems.... again.. lol
seems like my idle wants to stay at 1.5k rpm but after driving it, it goes back down to normal..... it probably needs a new TB gasket but blah... lol i hope its not a bad iacv again.
i've been having idle problems.... again.. lol
seems like my idle wants to stay at 1.5k rpm but after driving it, it goes back down to normal..... it probably needs a new TB gasket but blah... lol i hope its not a bad iacv again.
12-03-2011, 12:28 PM
COTM Coordinator
Spray some brake cleaner around the throttle body while the engine is running and see if the idle speeds up. If so, time to check it out.
12-03-2011, 01:22 PM
https://acurazine.com/forums/2g-tl-1999-2003-98/anyone-have-bride-recaro-bucket-seats-839905/
lol.. my car is a walmart car? what
lol.. my car is a walmart car? what
