ATTENTION!! Calling all 562/310/714/626/818/323/213 SO-CAL PART V
COTM Coordinator
Or I could pay you in good ol fashion American dollars when I see you at the meet......
BTW, came up on an LSD today at the junk yard. Best 50 bucks spent so far..
BTW, came up on an LSD today at the junk yard. Best 50 bucks spent so far..
Avant Garde Wheels
iTrader: (23)
Team Owner
iTrader: (15)
Paypal pisses me off, I call them way to often.
Three Wheelin'
iTrader: (3)
Lol, I just realized Mike, there's a local s13 coupe around my area that has the whole supermade kit. It's a white vert with XXR wheels I believe. BOOSTED.
COTM Coordinator
Got my ass handed to me by a civic EK hatch with possibly a GSR swap. Well not ass handed but he beat me by a car length Definitely miss the power of the 4G63T...
COTM Coordinator
I really need to save for a light weight flywheel, Im sure it could benefit greatly from it. Still need to get header and exhaust for this car, I can totally tell that the top end is suffering from the restrictive exhaust
Avant Garde Wheels
iTrader: (23)
i have all my basic bolts ons... lol
oh yea.. i forgot.. i picked up an extra exhaust camshaft.. so i'll need to cut off an inch on the end cuz of the crank angle sensor and then put that in place of my intake camshaft.. they say theres a good gain in the mid-range so i'll see how that goes when i get a chance to get that extra piece chopped off..
its a good cheap mod... as for the ECU...........................
so expensive...... lol
oh yea.. i forgot.. i picked up an extra exhaust camshaft.. so i'll need to cut off an inch on the end cuz of the crank angle sensor and then put that in place of my intake camshaft.. they say theres a good gain in the mid-range so i'll see how that goes when i get a chance to get that extra piece chopped off..
its a good cheap mod... as for the ECU...........................
so expensive...... lol
COTM Coordinator
i have all my basic bolts ons... lol
oh yea.. i forgot.. i picked up an extra exhaust camshaft.. so i'll need to cut off an inch on the end cuz of the crank angle sensor and then put that in place of my intake camshaft.. they say theres a good gain in the mid-range so i'll see how that goes when i get a chance to get that extra piece chopped off..
its a good cheap mod... as for the ECU...........................
so expensive...... lol
oh yea.. i forgot.. i picked up an extra exhaust camshaft.. so i'll need to cut off an inch on the end cuz of the crank angle sensor and then put that in place of my intake camshaft.. they say theres a good gain in the mid-range so i'll see how that goes when i get a chance to get that extra piece chopped off..
its a good cheap mod... as for the ECU...........................
so expensive...... lol
Oh well. Im sure its better.
Avant Garde Wheels
iTrader: (23)
people say this mod is almost like advancing the timing by 14 degrees or something.. it'd be nice if i had a good increase in power mid-range..
COTM Coordinator
Well I may adjust my cam a little. There are folks saying that advancing 3 teeth rather than 4 teeth, like I did, makes the power a lot more noticeable and down in the lower rpm range where the KA24DE likes to be anyway.
I may try that today as well as install that LSD. I cant wait to make two lines in the road when I burn out lol.
I may try that today as well as install that LSD. I cant wait to make two lines in the road when I burn out lol.
Avant Garde Wheels
iTrader: (23)
haha. what did you cut yours with?
and i need to fix my e-brake.. lmao. i found out that its only holding my driver side... passenger side moves freely even when engaged.
and i need to fix my e-brake.. lmao. i found out that its only holding my driver side... passenger side moves freely even when engaged.
COTM Coordinator
Sucks about the e brake cable. I have to fix the major exhaust leaks that I have but I dont care to fix them since I would prefer to get header and exhaust and the annoying ass leak pushes me to save for those pieces lol.
Avant Garde Wheels
iTrader: (23)
ah.. ok.. thats what i was thinking of using.. cool cool.
yea.. well, they say its just loose and needs tightening.. i'm just so lazy to get under there now... lol
JB weld close that leak. lol
yea.. well, they say its just loose and needs tightening.. i'm just so lazy to get under there now... lol
JB weld close that leak. lol
Avant Garde Wheels
iTrader: (23)
Team Owner
iTrader: (15)
He got the Mazda 5
LIST/RAMEN/WING MAHSTA 짱
iTrader: (16)
Half way through annihilating the outside, taking a short break now.
I take back what I said about how good the condition of your paint is, damn stealership must have thrown some heavy glaze on it. The car looked down right ugly after I stripped all the protection clean and decontaminated your paint thoroughly, lol.
I take back what I said about how good the condition of your paint is, damn stealership must have thrown some heavy glaze on it. The car looked down right ugly after I stripped all the protection clean and decontaminated your paint thoroughly, lol.
Almost done with the exterior polishing now. Most panels took 2 hits instead of one. Good thing I came prepared with medium polish and medium polishing pads, lol. got one door/b pillar, front and rear bumper left to polish.
Called my supplier and asked about polishing the glass roof, the reply I got was "don't bother", not even abrasive paint polish will do anything for it since the roof is harden glass...
Called my supplier and asked about polishing the glass roof, the reply I got was "don't bother", not even abrasive paint polish will do anything for it since the roof is harden glass...