Some ideas of what to do with this beaut
#1
Some ideas of what to do with this beaut
lowered on tein s tech springs dc sports cold air intake 20in rims tires are 225/35R20
mods to come
smoked side markers and tail lights
a spec kit
roof spoiler
trunk lip
tow hook
need ideas as far as performance mods..
mods to come
smoked side markers and tail lights
a spec kit
roof spoiler
trunk lip
tow hook
need ideas as far as performance mods..
The following 3 users liked this post by EvilVirus:
#5
^^ like a few days ago haha.
to give you performance ideas it would help to know what kind of car you have....auto vs mt. auto performance mods will only make you feel a little better but if you're going for massive gains it won't be there.
3rd cat being hfc or straight will not give you much performance gain.
i'd start with a jpipe and then if you really want some more power up top, get the HFPCs. that's about as far as i would go if i had an 04-06 like you
to give you performance ideas it would help to know what kind of car you have....auto vs mt. auto performance mods will only make you feel a little better but if you're going for massive gains it won't be there.
3rd cat being hfc or straight will not give you much performance gain.
i'd start with a jpipe and then if you really want some more power up top, get the HFPCs. that's about as far as i would go if i had an 04-06 like you
The following users liked this post:
Mark Bryant (07-29-2016)
The following users liked this post:
sockr1 (07-29-2016)
Trending Topics
The following users liked this post:
teh CL (08-08-2016)
#10
Brings me back to when I had an Integra and saw the other kids that would rebadge with fake red H badges.
There's no JDM variant of the 3G TL, so +1 on removing the H center caps.
But hey, that's just my personal opinion. You're free to modify your car however you'd like.
There's no JDM variant of the 3G TL, so +1 on removing the H center caps.
But hey, that's just my personal opinion. You're free to modify your car however you'd like.
The following users liked this post:
teh CL (08-08-2016)
#11
First legit rolling shot lol. Installed accord coupe fogs! Performance bolt on I've read manifold change throttle body and throttle body spacer obviously more exhaust work! HFPCD. There's an link with both on performance mods I'll find it
#13
you know what I meant lol. And yes cetrtainly a lot of condensation build up in my head lights! Think I'm just going to replace them! My drive turn signal bulb is blown too 😩
#14
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,031
Well, if it's built up to the point of moisture, you might as well crack em open and clean up up and reseal...mod them as you see fit while at it.
Or contact Bruce Ack05TL if he's still doing them.
I did know what you meant because I've installed a few of those and had the accord fogs before that.
Or contact Bruce Ack05TL if he's still doing them.
I did know what you meant because I've installed a few of those and had the accord fogs before that.
#15
Options are all about what your intentions are. Have a look and let me know if I can help recommend and brainstorm some ideas.
Products for: 2004 ACURA TL BASE 6Cyl 3.2L - Excelerate's Honda & Acura Store - Japanese Performance Specialist
Products for: 2004 ACURA TL BASE 6Cyl 3.2L - Excelerate's Honda & Acura Store - Japanese Performance Specialist
#17
Brings me back to when I had an Integra and saw the other kids that would rebadge with fake red H badges.
There's no JDM variant of the 3G TL, so +1 on removing the H center caps.
But hey, that's just my personal opinion. You're free to modify your car however you'd like.
There's no JDM variant of the 3G TL, so +1 on removing the H center caps.
But hey, that's just my personal opinion. You're free to modify your car however you'd like.
instead of the center cap replaced all 4 wheels. I dig the look. Just need to get coils. So I can have that agressive look..
The following users liked this post:
Mark Bryant (12-15-2016)
The following users liked this post:
Mark Bryant (12-15-2016)
#20
Take the fog light plug out , they dry right up.
sealed lights are stupid. needs airflow in there, damn near every other headlight is vented . you can take the Oring off the fog plug and pop them in if you want as well. just needs to breathe a little.
turn signals are easy. couple clips in the wheel well and pull back the liner, then it's right there
paint those calipers.
sealed lights are stupid. needs airflow in there, damn near every other headlight is vented . you can take the Oring off the fog plug and pop them in if you want as well. just needs to breathe a little.
turn signals are easy. couple clips in the wheel well and pull back the liner, then it's right there
paint those calipers.
Last edited by SocomM4; 12-15-2016 at 11:04 AM.
#24
Before.. to current setup
Traded varrstoen es2 17x9 for f1r f17 18x8.5F/9.5R.. any suggestions on tires to run.. going to roll fenders hopefully tomorrow if its not raining.
Not a huge fan on the 10 spoke. Miss the 5- 6 spoke look prefer that tbh.. but wanted a more agressive fitment. Passnger rear is partially rolled.
Not a huge fan on the 10 spoke. Miss the 5- 6 spoke look prefer that tbh.. but wanted a more agressive fitment. Passnger rear is partially rolled.
#26
like the style of the wheels and it's massive concave look in the rear but thats way too much lip being exposed for my own taste but they do look good though.. now all you need is a better full shot of your ride with the new setup, those last 3 pictures probably dont do justice for your ride
Thread
Thread Starter
Forum
Replies
Last Post
CL-S progression 01
3G TL (2004-2008)
29
05-06-2016 10:12 PM
manhatton
3G TL Tires, Wheels & Suspension
21
02-27-2016 04:48 PM