04WDPSEDAN > Thread > Timeline
04WDPSEDAN > Thread > Timeline
>Welcome to my Timeline< --->Progess, Enjoy!
04 TL 6MT, NAVI. Day 1. (Noob status)


A month later the following was done
::A-spec kit
::Comptech sport springs
::18" Ronjon Inspyers
::Comptech rear sway bar and polyurethane bushings.
::Type-s Tail lights.
::Fujita CAI









>Brake upgrade + Painted rear calipers.
Comptech exhaust installed
::Rotora cross drilled and slotted rotors
::Rotora high performance brake pads
::High temp black gloss caliper paint
::Comptech exhaust installed







Installed more goodies.
::19" Ronjon gunmetal insypers
::Black gloss roof overlay
::Type-s side markers
::Accord foglight relocation mod
::Custom headlights by JNC
::Tein Super Street coil overs
::Wired up for DRL's w/nokia yellow bulbs
::Type-S Mirrors installed







Slammed on stockies
::Stock 17's
::Aspec rims





I installed a custom chrome grill
::Custom grill




Installed WORKS! Hyper-gold VS-XX






Some TLC on the paint, Paint correction done. refinishing the WORK Rims








TYPE-S front end w/ OEM Window visors
::Type-s bumper
::Type-s fogs
::Type-s grill
::A-spec
::CF Overlay "Acura" Sticker
:
EM Window visors




Did some interior CF upgrades, w/Acura racing pedals.
::Steering wheel
::Center console
::Window switch covers
::Rear A/C Vent cover
::Installed Acura racing pedals







RDX rear brake cover installed on rear calipers
::RDX brake covers





Most current: Comptech Supercharger, engine bay work
::Comptech blower
::Polished intake manifold
::Painted (TEALish) Valve covers
::Custom work done on blower
::Painted gloss black metallic engine covers









THANK YOU for viewing!
04 TL 6MT, NAVI. Day 1. (Noob status)


A month later the following was done
::A-spec kit
::Comptech sport springs
::18" Ronjon Inspyers
::Comptech rear sway bar and polyurethane bushings.
::Type-s Tail lights.
::Fujita CAI









>Brake upgrade + Painted rear calipers.
Comptech exhaust installed
::Rotora cross drilled and slotted rotors
::Rotora high performance brake pads
::High temp black gloss caliper paint
::Comptech exhaust installed







Installed more goodies.
::19" Ronjon gunmetal insypers
::Black gloss roof overlay
::Type-s side markers
::Accord foglight relocation mod
::Custom headlights by JNC
::Tein Super Street coil overs
::Wired up for DRL's w/nokia yellow bulbs
::Type-S Mirrors installed







Slammed on stockies
::Stock 17's
::Aspec rims





I installed a custom chrome grill
::Custom grill




Installed WORKS! Hyper-gold VS-XX






Some TLC on the paint, Paint correction done. refinishing the WORK Rims








TYPE-S front end w/ OEM Window visors
::Type-s bumper
::Type-s fogs
::Type-s grill
::A-spec
::CF Overlay "Acura" Sticker
:
EM Window visors



Did some interior CF upgrades, w/Acura racing pedals.
::Steering wheel
::Center console
::Window switch covers
::Rear A/C Vent cover
::Installed Acura racing pedals







RDX rear brake cover installed on rear calipers
::RDX brake covers





Most current: Comptech Supercharger, engine bay work
::Comptech blower
::Polished intake manifold
::Painted (TEALish) Valve covers
::Custom work done on blower
::Painted gloss black metallic engine covers









THANK YOU for viewing!
Man, you TL is coming together great. 
Looks awesome! Btw, which steering wheel is this? I have been thinking about changing mine
[quote=04WDPSeDaN;14276151]>Welcome to my Timeline< --->Progess, Enjoy!
[quote=04WDPSeDaN;14276151]>Welcome to my Timeline< --->Progess, Enjoy!
Thank you buddy!! I have a ton of pictures, If I decided to upload 500+ photos i'm sure Ill be ban for a while lmao.
Thank you buddy!! It's been a long road. This has been almost 5 years in the making. I can't wait to install this bad boy either.
Thanks man! It's hard to see nicely done TL's now a days..
Thank you very much man. It's the factory accessory wheel, they are hard to come by now. You can order it from http://www.acurapartswarehouse.com/a...ing-wheel.html
It would be the 1st steering wheel you see.
Thanks man! It's hard to see nicely done TL's now a days..
It would be the 1st steering wheel you see.
Trending Topics
Thank you bro! When the fuck am I going to see you at a local meet?!
On the 04-06 bumper with the A-spec and accord lights I bought the grill from someone in NYC was making and selling but he's no longer making it.
Thanks brother!!! you got some nice whips man, I just got this TL.
Last edited by 04WDPSeDaN; Jan 22, 2013 at 06:18 PM.
Some mixed photos:
NYC Skyline at night

Interior shot of SMT 10 LED's from autolumination.com:



Road trip to Canada


Road trip to Myrtle beach



ROnJON Mega meet.









My 95 Stillen Maxima





NYC Skyline at night

Interior shot of SMT 10 LED's from autolumination.com:



Road trip to Canada


Road trip to Myrtle beach



ROnJON Mega meet.









My 95 Stillen Maxima





You've done very nice work on that WDP. I prefer the look of the 04-06 front end with the accord fogs than the newer front and i also prefer the Aspecs over the gold wheels .....i just think in those pics it looked sooo fresh and clean.....but of course i may be a bit biased. 
Either way looking real good and good luck with the blower. In a couple weeks i'll start working on my blower build too. Lets keep in touch as we both take it on.


Either way looking real good and good luck with the blower. In a couple weeks i'll start working on my blower build too. Lets keep in touch as we both take it on.
Joined: Sep 2008
Posts: 78,245
Likes: 20,199
Absolutely awesome progress thread...so well documented and executed. And you consistently have taken good photos. Keep up the great work!
And I love that you picked a wheel and pretty much stuck with it. (I'm guessing aspec is your winter set up).
PS. Please ship your steering wheel to me in exchange for my well worn one. In addition I will send you a crisp fitty dollar bill to sweeten the pot. Deal?
And I love that you picked a wheel and pretty much stuck with it. (I'm guessing aspec is your winter set up).
PS. Please ship your steering wheel to me in exchange for my well worn one. In addition I will send you a crisp fitty dollar bill to sweeten the pot. Deal?
... Getting closer to 100K. I still don't know why UPS gave me crap for sending an entire roof to you!!
I'll be on your thread after I finish posting on this. The specs are
Front: 19x8 +34 Hi-disk (clears BBK)
Rear: 19x9 +36 Low-disk (maximum lip)
You've done very nice work on that WDP. I prefer the look of the 04-06 front end with the accord fogs than the newer front and i also prefer the Aspecs over the gold wheels .....i just think in those pics it looked sooo fresh and clean.....but of course i may be a bit biased. 
Either way looking real good and good luck with the blower. In a couple weeks i'll start working on my blower build too. Lets keep in touch as we both take it on.


Either way looking real good and good luck with the blower. In a couple weeks i'll start working on my blower build too. Lets keep in touch as we both take it on.
YO MAS!! What's up man?! Thanks buddy, I did like the front end of the 04-06 with accord fogs, but like the aggressive look of the Type-s. A lot of people like the A-spec's over the goldies.. The works were put on to be a bit different from the rest of the coward. It seemed at every meet you would see 5 or 9 guys rocking the same wheels with different offsets. TO BE HONEST, after seeing pictures of those Ronjons wheels on my car, I would like them again
Congrats on your blower journey, it's all exciting plus nerve racking all at the same time. I shall have my car done very soon 
Absolutely awesome progress thread...so well documented and executed. And you consistently have taken good photos. Keep up the great work!
And I love that you picked a wheel and pretty much stuck with it. (I'm guessing aspec is your winter set up).
PS. Please ship your steering wheel to me in exchange for my well worn one. In addition I will send you a crisp fitty dollar bill to sweeten the pot. Deal?
And I love that you picked a wheel and pretty much stuck with it. (I'm guessing aspec is your winter set up).
PS. Please ship your steering wheel to me in exchange for my well worn one. In addition I will send you a crisp fitty dollar bill to sweeten the pot. Deal?
SUP BROSKI! HAHAHA Awesome bro, thanks! You have done an amazing job on your car. Ive been playing with myself LMAO. A-specs are the winter setup, the car itself doesn't really see snow anyway but they are nice and smooth to ride on compared to the work wheels. Hey man, If I sent Tyler my entire roof through UPS, I don't see why this deal won't work out

Front: 19x8 +34 Hi-disk (clears BBK)
Rear: 19x9 +36 Low-disk (maximum lip)
Thank you Steven!! I love them too, starting to regret selling them.
Your car has come a long way
, I remember seeing you post pictures of the works every now and then and thinking to myself, I need that same exact set up.
All you need now is a set of type S headlights to finish off the front.
, I remember seeing you post pictures of the works every now and then and thinking to myself, I need that same exact set up. All you need now is a set of type S headlights to finish off the front.
Joined: Sep 2008
Posts: 78,245
Likes: 20,199
Baby steps man, let's start with the wheel...if it works out, we'll deal with Tyler's roof. Savvy?
PS...I agree about the ride. I actually would love to see how some stock 17's feel for a nice cozy ride with a 45 series tire. If I find a cheap set nearby, I'll likely pick them up.
J.
PS...I agree about the ride. I actually would love to see how some stock 17's feel for a nice cozy ride with a 45 series tire. If I find a cheap set nearby, I'll likely pick them up.
J.
Hahah thanks man! I live up north, I know who the guy your talking about,
Baby steps man, let's start with the wheel...if it works out, we'll deal with Tyler's roof. Savvy?
PS...I agree about the ride. I actually would love to see how some stock 17's feel for a nice cozy ride with a 45 series tire. If I find a cheap set nearby, I'll likely pick them up.
J.
PS...I agree about the ride. I actually would love to see how some stock 17's feel for a nice cozy ride with a 45 series tire. If I find a cheap set nearby, I'll likely pick them up.
J.
Thanks bro! Ronjons are very affordable, great wheels for the price.
great work man and tastefully modded!! you leather is so minty and new looking!!
cant wait to see the SC up and running, what are you doing with the FIC? wiring it in or do they make a harness for it like my old car (srt), got mine from boomslang.
cant wait to see the SC up and running, what are you doing with the FIC? wiring it in or do they make a harness for it like my old car (srt), got mine from boomslang.
Thank you man! My leather is getting worn now, it's the crap shit acura uses. I sold the AEM FIC because it was very hard to find a NJ turner who can install it and wire the unit correctly, then dyno tune and ect ect. I'm almost done with the install, the weather has been so cold my balls have fallen off. Once I'm completely done will post up some results! I can't wait to hear the WHINE













