THE Bay Area Chat Thread (Part Trois)
#3962
I need your help guys.
What's the traffic law for the following situation? See the attached image.
Some people keep on stopping at this intersection (circled in red). They stop (at the green circle) for minutes until there's a red light so they can cut across to the left lane.
There is no STOP sign or YIELD sign. There is also a solid white line for them to get their speed up to merge. There are also no oncoming cars because that lane starts there.
I can understand if they slowed down to check for pedestrians but I don't think they should be stopping there for the entire time. Sometimes up to 10 cars are behind them because they stop there.
Am I wrong for getting impatient with these drivers?
What's the traffic law for the following situation? See the attached image.
Some people keep on stopping at this intersection (circled in red). They stop (at the green circle) for minutes until there's a red light so they can cut across to the left lane.
There is no STOP sign or YIELD sign. There is also a solid white line for them to get their speed up to merge. There are also no oncoming cars because that lane starts there.
I can understand if they slowed down to check for pedestrians but I don't think they should be stopping there for the entire time. Sometimes up to 10 cars are behind them because they stop there.
Am I wrong for getting impatient with these drivers?
#3963
Safety Car
One of my PCD broke yesterday. Completley broke off at the weld. Luckily RV6 is going to overnight me a replacement.
#3967
Racer
iTrader: (1)
^ I didnt have to relocate my bumper tabs because the tire was actually rubbing against the metal. Maybe that could also be the factor? But at first I trimmed around the tab (where the bolt goes into), so it doesnt stick out so much either.
That all seemed to help, mine rubbed when i accelerated.
___________
See if trimming around the bolt helps? If you know forsure it is the tab thats rubbing your gonna have to relocate it.
What most people do is cut the tab off and make another hole farther back, where the bolt/pin would go into.
That all seemed to help, mine rubbed when i accelerated.
___________
See if trimming around the bolt helps? If you know forsure it is the tab thats rubbing your gonna have to relocate it.
What most people do is cut the tab off and make another hole farther back, where the bolt/pin would go into.
#3969
Safety Car
Made a custom cold air intake for my blower tonight. Not sure what it does performance wise but the whine is much louder (crappy cell phone pic).
#3972
Safety Car
Tried to adjust my coilovers but the bottom locking ring won't budge. Is there a tool for this? The ones that came with the kit only fit the top rings where the spring sits.
#3974
Safety Car
I tried that same method but with WD40 and failed. I'll try the PB Blaster next time.
#3976
Mr. L.E.D.
iTrader: (1)
if you need to get a little more extreme than pb blaster then spray a shit ton of pb blaster and let it sit for a good 15-30 minutes so it has time to penetrate and add more every 5 minutes or so... then use a heat gun a carefully heat up the ring on all sides, try not to heat up the shock body itself too much otherwise the heat method is useless. you need to direct the heat to the collar only so it expands JUUUUUST a tiny bit and then go at it with the screwdriver and hammer again.
i had to use this exact method when my coilover collar seized 2 days before wekfest last year. and once it's free, get a toothbrush and clean the hell out of all the threads reallllllllly well.
i had to use this exact method when my coilover collar seized 2 days before wekfest last year. and once it's free, get a toothbrush and clean the hell out of all the threads reallllllllly well.
The following users liked this post:
UA6 (11-23-2011)
#3977
Safety Car
Sounds like a plan. It'll be a little while before I can try it. Back in Vegas for the holidays.
#3979
The Screeching Toyo's
iTrader: (2)
Hey all, my brother and I went to the SF International Auto Show on Tuesday.
We got there at 4PM and there was no one there!! We took a few pics, and I
thought I would share them with you. If you have any questions about any of
the cars, just ask.
http://aztecrol.smugmug.com/Cars/SF-...048844_wjSShkn
We got there at 4PM and there was no one there!! We took a few pics, and I
thought I would share them with you. If you have any questions about any of
the cars, just ask.
http://aztecrol.smugmug.com/Cars/SF-...048844_wjSShkn
#3981
Feenin on some 20's
iTrader: (2)
SUP NORCAL! Hope all is well.
I have been gone for quite some time, but I may be returning soon, hopefully see some of you guys. It's been about 2.25 years since I been to a norcal meet due to school. Anywho, I NEED YOUR HELP!
My sister has just been entered into Singtao pageant and needs your votes! The link is below! Thanks norcal. Hope to see you guys soon.
https://acurazine.com/forums/ramblings-12/acurazine-members-i-need-your-help-%3Dd-840937/
Coming back in a week or so. Any meets coming up I should be aware of?
I have been gone for quite some time, but I may be returning soon, hopefully see some of you guys. It's been about 2.25 years since I been to a norcal meet due to school. Anywho, I NEED YOUR HELP!
My sister has just been entered into Singtao pageant and needs your votes! The link is below! Thanks norcal. Hope to see you guys soon.
https://acurazine.com/forums/ramblings-12/acurazine-members-i-need-your-help-%3Dd-840937/
Coming back in a week or so. Any meets coming up I should be aware of?
Last edited by ILLustriousUA6; 12-08-2011 at 04:24 AM.
#3982
Team Owner
iTrader: (15)
SUP NORCAL! Hope all is well.
I have been gone for quite some time, but I may be returning soon, hopefully see some of you guys. It's been about 2.25 years since I been to a norcal meet due to school. Anywho, I NEED YOUR HELP!
My sister has just been entered into Singtao pageant and needs your votes! The link is below! Thanks norcal. Hope to see you guys soon.
https://acurazine.com/forums/showthread.php?t=840937
Coming back in a week or so. Any meets coming up I should be aware of?
I have been gone for quite some time, but I may be returning soon, hopefully see some of you guys. It's been about 2.25 years since I been to a norcal meet due to school. Anywho, I NEED YOUR HELP!
My sister has just been entered into Singtao pageant and needs your votes! The link is below! Thanks norcal. Hope to see you guys soon.
https://acurazine.com/forums/showthread.php?t=840937
Coming back in a week or so. Any meets coming up I should be aware of?
The following users liked this post:
Flipster23 (12-08-2011)
#3985
the subaru scene is going strong still. they have weekly meets that people continue to go to EVERY week.
monday night in dublin is about 10 people
wednesday nights in fremont 30+ people
friday night wingstop off curtner
plus other weekly meets for closer areas
i haven't been to meets in some time. gone to a few dublin ones recently though. normally in the summer i host a lot of cool BBQ's at either treasure island or coyote point
it's kinda cool that a lot of these guys continue to go to the meets every week
monday night in dublin is about 10 people
wednesday nights in fremont 30+ people
friday night wingstop off curtner
plus other weekly meets for closer areas
i haven't been to meets in some time. gone to a few dublin ones recently though. normally in the summer i host a lot of cool BBQ's at either treasure island or coyote point
it's kinda cool that a lot of these guys continue to go to the meets every week
#3989
Safety Car
Sick pics Vimal. Was this last weekend?
#3991
Mr. L.E.D.
iTrader: (1)
lito rode passenger but yea, i was the only one on my team to go. i kinda regret going to HIN, i should have gone to Autocon which was this weekend. ah well. now i know. never go out of your way to attend HIN.
btw, can you show me some different coverage of my car? i dont know where else pics have been posted.
btw, can you show me some different coverage of my car? i dont know where else pics have been posted.
#3999
Da HoNu
hey guys..so got some relatively bad news today from the technician..my shocks are in need of replacement and so he's suggesting new shocks or new coilovers. I drive a 97 2.2CL and I've been riding on k-sport coilovers (originally on Klepto's CL) and i guess it's about time that they give out given I put some good mileage on them.
Anybody with knowledge of the 1st gen CL's know of any good shock replacements or coilover setups? not trying to spend too much as the car is old and getting up there in mileage, but i'd still like to rock a lowered ride since i take good care of her and she'll last me a couple more years hopefully. I've been looking into Tein's, just not sure which setup to go with since they have different ones. I could always go back to k-sports/d2's. And i've heard bad things about form n function.
any help would be greatly appreciated! TIA!
Anybody with knowledge of the 1st gen CL's know of any good shock replacements or coilover setups? not trying to spend too much as the car is old and getting up there in mileage, but i'd still like to rock a lowered ride since i take good care of her and she'll last me a couple more years hopefully. I've been looking into Tein's, just not sure which setup to go with since they have different ones. I could always go back to k-sports/d2's. And i've heard bad things about form n function.
any help would be greatly appreciated! TIA!