Hampton Roads, VA (Register Here)
#2401
Former Whyner
Damn Shawn whats up?? I have been trying to get a hold of you short from just stopping by your crib. I wanted you to roll with us to the meet from last August figured you werent interested so I left ya alone. Still got the RL??
#2402
There is a TL & GL in
iTrader: (2)
Join Date: Apr 2009
Location: Northern VA
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Saturday and Sunday down in VA Beach this weekend! Forecast is promising, Look out for my car on 264 and/or atlantic ave! if anyone free pm me for cell! Oh yea, we usually try to play ultimate frisbee on beach at night, possibly saturday night anybody wanna join the more the merrier!
#2403
There is a TL & GL in
iTrader: (2)
Join Date: Apr 2009
Location: Northern VA
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, if all goes well i should be installing my coilovers on friday, i wont have time to get an alignment before i go down there. Anyone know any good places to get alignment done in va beach area saturday morning? THANKS!
#2404
Former Whyner
Saturday and Sunday down in VA Beach this weekend! Forecast is promising, Look out for my car on 264 and/or atlantic ave! if anyone free pm me for cell! Oh yea, we usually try to play ultimate frisbee on beach at night, possibly saturday night anybody wanna join the more the merrier!
Bert's Alignment
(757) 499-2828
305 Rose Marie Ave
Virginia Beach, VA 23462
http://national.citysearch.com/profi...rofileTab-maps
#2406
Sippy Cup (x2)
Join Date: Jun 2005
Location: Virginia Beach, VA
Age: 43
Posts: 1,961
Likes: 0
Received 9 Likes
on
3 Posts
There's a place in Norfolk that is awesome. They'll actually adjust your alignment to make your car handle the best, not just to make sure it's in specs. Unfortunately they're closed on Saturday but if anyone else is ever interested, here is their website.
http://mizelles.net/
http://mizelles.net/
#2408
Former Whyner
Well any if your willing to spend 300-400 on labor. I would help but work schedule sucks for this weekend. If we get 4 heads we could have that done in no time
#2413
Former Whyner
Other than that I havent really gotten up on it too much cuz im worried about shorting that sensor again.
#2414
Green Machine
iTrader: (3)
No need for pics really, just remove the 3 clips and 2 screws that hold the front piece of engine bay plastic trim on which lays on top of the the hood latch (It's 3 feet long. You cant miss it!). Then, stick your hand behind the grill and pull the recessed piece of debris-shielding plastic off from around the latch release handle and set it aside. Once this is off, slip you hand as well as a 10mm socket behind the grill again and loosen (don't remove) the 3 bolts. Adjust it a little bit at a time, tightening them back up after each test fitment of the hood. Within 5 mins, your done!
P.S- when your done, adjust the rubber bump stops that the hood rests on while closed by turning them counter-clockwise(?) to raise them so the hood doesn't rattle/have slop.
P.S- when your done, adjust the rubber bump stops that the hood rests on while closed by turning them counter-clockwise(?) to raise them so the hood doesn't rattle/have slop.
#2430
Former Whyner
LOL SAWZALL, its like an electric kitchen knife but more beastly. Thanks Steve but ill pass on that LOL .
I want to make small precise cutz
I want to make small precise cutz
#2431
MY KBP IS BTR THN URS...
I hear ya I tink a grinder with a small cut off wheel would probably do a good job.
This is a sawzall
http://www.milwaukeetool.com/Product...procating+Saws
#2432
MY KBP IS BTR THN URS...
RonJon are u taking the insulation off from the back side of the hood for this mod?
I have been thinking about it but unsure as of yet about doing it.
I have been thinking about it but unsure as of yet about doing it.
#2433
Former Whyner
YEah that insulation padding went off already and is now sitting in the garage, but I think that is a piece that im actually going to throw away. I even gained .1 HP for that mod
#2435
Former Whyner
really how much was it?? see if you can try and resell it
#2437
Former Whyner
Yeah im working 6-6 but I have to go to the dealership and pick up my NEW PLATES
I really like my old ones that way people know i had my car for a while
I really like my old ones that way people know i had my car for a while
#2439
Former Whyner
#2440
Former Whyner
MEETING FEELER
It kinda seems like since the Douche bag Lee (MaliciousRC) abandoned us and Mike kinda faded away with personal issues, I think someone should step up and try and plan a meet or a time where we can all chill and talk.
Looking to do something the 3rd week in July weekend or maybe the first week of Aug. I would also like to get maximum participation and open a new thread. making it more visible.
Last year I thought we had a great success at the Hampton McFaddens meet but not sure if we should do that again, but the plus is it might entice some NOVA peeps.
Need some feedback on DATES AND LOCATIONS
It kinda seems like since the Douche bag Lee (MaliciousRC) abandoned us and Mike kinda faded away with personal issues, I think someone should step up and try and plan a meet or a time where we can all chill and talk.
Looking to do something the 3rd week in July weekend or maybe the first week of Aug. I would also like to get maximum participation and open a new thread. making it more visible.
Last year I thought we had a great success at the Hampton McFaddens meet but not sure if we should do that again, but the plus is it might entice some NOVA peeps.
Need some feedback on DATES AND LOCATIONS