Any good shops in NOVA
06-02-2011, 06:38 PM
#2
YoU need to contac Dennis from I-modify.com he is an expert and great prices. Tell him that Melvin with black Tl send you, he will take care of you. And he is in the NOVA area and he works by appointment only so go to his site and send him a message. Tons of people have had work done by him.
Last edited by melvin2816; 06-02-2011 at 06:41 PM.
06-02-2011, 07:45 PM
#3
Thanks Melvin. Where exactly his shop located? Thanks for the refer
YoU need to contac Dennis from I-modify.com he is an expert and great prices. Tell him that Melvin with black Tl send you, he will take care of you. And he is in the NOVA area and he works by appointment only so go to his site and send him a message. Tons of people have had work done by him.
06-03-2011, 08:13 AM
#5
He is is the Springfield VA area very close to Fort Belvour.
Great guy and he has own like 30 acura cars and he is Moderator in .com. I think he is some type of engineer.
You should come this weekend to the east coast honda meet this weekend Saturday at Richmond Va and sunday Frederickburg VA
Great guy and he has own like 30 acura cars and he is Moderator in .com. I think he is some type of engineer.
You should come this weekend to the east coast honda meet this weekend Saturday at Richmond Va and sunday Frederickburg VA
06-03-2011, 08:31 PM
#7
I can vouch for Dennis. I worked with him few times. Very knowledgeable guy about our cars. RL/TL/TSX/RSX etc.. Hes basically the neighborhood mechanic. He works from his home garage in Lorton, VA. Price he charges is very very reasonable.
Trending Topics
06-12-2011, 07:03 AM
#8
Depends on what you want. UCS Performance could possibly help you. You need to discuss with them. If that doesn't work out for you, try Fresh Designs in Ellicott City, MD.
07-18-2012, 01:22 PM
#11
Not the cheapest place but they know what they are doing. There is also a shop in Germantown behind the BP station near the intersection of 118 and Crystal Rock that has a good reputation but the name escapes me.
I've used Curry's but not the other place.
07-18-2012, 01:39 PM
#12
Curry's in Gaithersburg on 355 near Lakeforest Mall - just opposite the strip mall with the Bed Bath and Beyond a block from the 355/28 intersection.
Not the cheapest place but they know what they are doing. There is also a shop in Germantown behind the BP station near the intersection of 118 and Crystal Rock that has a good reputation but the name escapes me.
I've used Curry's but not the other place.
Not the cheapest place but they know what they are doing. There is also a shop in Germantown behind the BP station near the intersection of 118 and Crystal Rock that has a good reputation but the name escapes me.
I've used Curry's but not the other place.
07-22-2012, 04:01 PM
#13
I can vouch for curry's in gaithersburg.
and speaking of preload, theres no independent preload adjustment on the tein ss. The preload is determined by the height.
If its clucking it might just be a loose bolt that needs to be tighten.
and speaking of preload, theres no independent preload adjustment on the tein ss. The preload is determined by the height.
If its clucking it might just be a loose bolt that needs to be tighten.
07-23-2012, 09:20 AM
#14
You might consider installing some Silenser Rubber inserts on the springs.
Specially in the area were the springs coil are closer to each other. When the springs gets compress the silenser eliminates the clicking sound of when the spring is compressed.
http://www.tein.com/online_shop/wrench.html
07-23-2012, 09:30 AM
#15
Zelaya
You might consider installing some Silenser Rubber inserts on the springs.
Specially in the area were the springs coil are closer to each other. When the springs gets compress the silenser eliminates the clicking sound of when the spring is compressed.
http://www.tein.com/online_shop/wrench.html
You might consider installing some Silenser Rubber inserts on the springs.
Specially in the area were the springs coil are closer to each other. When the springs gets compress the silenser eliminates the clicking sound of when the spring is compressed.
http://www.tein.com/online_shop/wrench.html
Hey Melvin, thanks for the suggestion I do remember my Teins CS for the RL has them but for rear only but I'll check them out.
07-25-2012, 06:59 AM
#16
Thanks guys for the recomendations, I went to Curry's @ Gaithersburg location last Thursday and Danny and Matt the mechanic help me with the issue. Just have to wait and see if the clunking noise comes back. The mechanic end up using the manual reference and lowered the car to 20mm front and 33mm for the rear which is too low for my taste but will see if that fix the issue, I think I need to raise the rear a bit.
Hey Melvin, thanks for the suggestion I do remember my Teins CS for the RL has them but for rear only but I'll check them out.
Hey Melvin, thanks for the suggestion I do remember my Teins CS for the RL has them but for rear only but I'll check them out.
07-25-2012, 10:19 PM
#18
+1 on Dennis
He does awesome work and his prices can't be beat by anyone.
He installed my Navtool, Ps2, rear camera, H&R sport springs, and a bunch of other stuff on my car and my friends car.
Really cool and chill guy to deal with. He does work out of his garage but again, hes a good guy, honest and trust worthy.
I messaged him recently about getting my coils and PCDs installed. He said hes been busy with work and stuff and likely will be for the next month or two so no car related work for a while
He does awesome work and his prices can't be beat by anyone.
He installed my Navtool, Ps2, rear camera, H&R sport springs, and a bunch of other stuff on my car and my friends car.
Really cool and chill guy to deal with. He does work out of his garage but again, hes a good guy, honest and trust worthy.
I messaged him recently about getting my coils and PCDs installed. He said hes been busy with work and stuff and likely will be for the next month or two so no car related work for a while
Thread
Thread Starter
Forum
Replies
Last Post
JarrettLauderdale
2G CL Dynograph Gallery
5
09-21-2015 07:51 PM
Abe_Froman
Car Parts for Sale
1
09-16-2015 01:27 PM
