Wheels, Finally
#121
Burning Brakes
Thread Starter
I think I like it, now to match the other side
#122
Burning Brakes
Thread Starter
I left out an important step. Using 3M (I don't work for them, but trust them) 1/4" vinyl tape to create step for 3M 5952 VHB double stick tape to hold tight, but not stick out too far.
It's looking a lot like a how to
It's looking a lot like a how to
The following users liked this post:
DaIll1 (07-12-2020)
#124
Burning Brakes
Thread Starter
#125
Burning Brakes
Thread Starter
Thought I'd toss this in here. If you want to add the 3rd brake light flash, the best place to tap into the feed, without removing the headliner, is under the driver side C pillar cover.
This is also where I chose to tap for my diffuser brake light so it flashes too.
It is a little tight with the airbag system right there, but doable.
This is also where I chose to tap for my diffuser brake light so it flashes too.
It is a little tight with the airbag system right there, but doable.
#126
Burning Brakes
Thread Starter
Just gotta say, Woomp! There it is.
Did a little tribute to Kobe with the Black Mamba.
After the paint cures a bit I will have the black wrapped in 3m carbon fiber to match.
Did a little tribute to Kobe with the Black Mamba.
After the paint cures a bit I will have the black wrapped in 3m carbon fiber to match.
Last edited by DaIll1; 08-11-2020 at 08:38 PM.
#127
Burning Brakes
Thread Starter
A millennial told me my car is snazzy, but I'm not sure it still means the same thing as when my dad said it.
#128
Burning Brakes
Thread Starter
By the way, for the paint, I went to a local auto paint supply store and had them load up spray cans for me so I could use the correct paint code and a clear with catalyst. Spray bombs aren't as good as the Devilbis gun I used when I was a gun slinger, but my tools were stolen years ago and being in an apartment, I didn't want to go buy all that stuff for a one-time.
#129
Burning Brakes
Thread Starter
Here's a couple more
#131
Burning Brakes
Thread Starter
Not finished with wiring yet (not looking forward to under dash work). They are directly under side view mirrors.
Made me a new mask today
Made me a new mask today
#132
Burning Brakes
Thread Starter
Got the puddle lights hooked up.
#133
Burning Brakes
Thread Starter
Wasn't well pleased with only the front doors having puddle lights, so I took it all apart and redid it with the same LEDs that I used for the diffuser brake light.
#135
Burning Brakes
Thread Starter
Took my winter beater out today. Woke up to 4" of snow and didn't want to take the ILL one out.
#136
Burning Brakes
Thread Starter
I'm out.
In mourning for the free world.
In mourning for the free world.
#137
This threat is great, your supply of tools is doing you well lmao. I have a 2016 im deleting the chrome and waiting on my coils to come in. Already put wheels and a nice tint on it.
I want to bring mine to an exhaust shop to get a similar quad tipped look and eventually add a lip up front.
Any idea if the head unit is replaceable, or speakers upgradeable?
I also want to look into a skid plate. How’s ground clearance on your coils/how low did you go?
I want to bring mine to an exhaust shop to get a similar quad tipped look and eventually add a lip up front.
Any idea if the head unit is replaceable, or speakers upgradeable?
I also want to look into a skid plate. How’s ground clearance on your coils/how low did you go?
The following users liked this post:
DaIll1 (07-06-2021)
#138
Burning Brakes
Thread Starter
This threat is great, your supply of tools is doing you well lmao. I have a 2016 im deleting the chrome and waiting on my coils to come in. Already put wheels and a nice tint on it.
I want to bring mine to an exhaust shop to get a similar quad tipped look and eventually add a lip up front.
Any idea if the head unit is replaceable, or speakers upgradeable?
I also want to look into a skid plate. How’s ground clearance on your coils/how low did you go?
I want to bring mine to an exhaust shop to get a similar quad tipped look and eventually add a lip up front.
Any idea if the head unit is replaceable, or speakers upgradeable?
I also want to look into a skid plate. How’s ground clearance on your coils/how low did you go?
The head unit is so embedded with car function I think it would be better to build a stand alone and leave the factory one alone, The only thing I've done with the factory ELS system is unplug the ANC device. With my exhaust I don't need their fake sounds pumped in.
I have not changed the ride height, the skirt extensions give it the illusion of being lowered.
#139
Burning Brakes
Thread Starter
Wrong kind of customizing.
A girl in the center lane decided she didn't need to be in the left turn lane to make a left turn, right into me.
A girl in the center lane decided she didn't need to be in the left turn lane to make a left turn, right into me.
#140
Burning Brakes
Thread Starter
She pushed me into the center divider and cracked the lips on both front wheels and nobody wants to polish the new wheels to match, so I'm having all 4 powder coated in bright gold
#141
Burning Brakes
Thread Starter
Got her back today.
The following users liked this post:
godfather2 (08-28-2021)
#142
Burning Brakes
Thread Starter
My back degraded to the point it was very painful getting in and nearly impossible to get out, so yesterday I sold her. I'm sad and will miss so much.
The following users liked this post:
DaIll1 (12-04-2021)
#144
Burning Brakes
Thread Starter
#145
Burning Brakes
Thread Starter
Thinking back, I wish I would have gone with the Volk Magnesium Blue rather than the gold for the wheels. I wish that the insurance company would have payed to have the 2 damaged wheels polished to match what they were before. Still missing driving this car, someone got a nice custom car.
Thread
Thread Starter
Forum
Replies
Last Post
06BlackDevil
1G TSX Photograph Gallery
9
10-23-2012 11:36 PM