Stance Acquired v2.0 NSX edition
#763
Reading this thread almost makes me not to want to take the purist approach with my NSX. My current mantra is "wheels, exhaust, modern radio, done!"
BTW, do you have a sound clip of your exhaust somewhere? Still choosing. I won't install one until my car comes out of hibernation in the spring, but would like to decide and get the parts sooner.
Edit: So does yours drone?
BTW, do you have a sound clip of your exhaust somewhere? Still choosing. I won't install one until my car comes out of hibernation in the spring, but would like to decide and get the parts sooner.
Edit: So does yours drone?
Last edited by neuronbob; 11-22-2015 at 09:56 AM.
The following users liked this post:
rockstar143 (11-23-2015)
#764
A few more parts outside of the list you mentioned won't hurt lol.
It's funny you ask about a sound clip. I actually found an old one on my laptop last night. I'm at work right now but I'll upload it when I get home.
As far as drone in the cabin it doesn't but for anyone following you yes. I drove for an hour with friends behind me last weekend and they said it was loud but I also have intake, headers and high flow cats. I always get compliments on the way the exhaust sounds though.
It's funny you ask about a sound clip. I actually found an old one on my laptop last night. I'm at work right now but I'll upload it when I get home.
As far as drone in the cabin it doesn't but for anyone following you yes. I drove for an hour with friends behind me last weekend and they said it was loud but I also have intake, headers and high flow cats. I always get compliments on the way the exhaust sounds though.
Last edited by p.diddy; 11-22-2015 at 10:02 AM.
#767
Reading this thread almost makes me not to want to take the purist approach with my NSX. My current mantra is "wheels, exhaust, modern radio, done!"
BTW, do you have a sound clip of your exhaust somewhere? Still choosing. I won't install one until my car comes out of hibernation in the spring, but would like to decide and get the parts sooner.
Edit: So does yours drone?
BTW, do you have a sound clip of your exhaust somewhere? Still choosing. I won't install one until my car comes out of hibernation in the spring, but would like to decide and get the parts sooner.
Edit: So does yours drone?
The following 2 users liked this post by synth19:
neuronbob (11-23-2015),
rockstar143 (11-23-2015)
#769
OK, OK, OK. I'll cry "uncle" and at least look at the Bilsteins. On the lower perch, they give just under an inch drop, and I get to keep the stock springs. I don't need a full coilover system, my car's not going to be tracked enough to justify the KW setup that many track folks are in love with on Prime.
Last edited by neuronbob; 11-23-2015 at 04:21 PM.
#772
as of 24Nov15 mods as follows:
B-Line Motorsports CAI
Comptech Headers
Taitec GTLW Exhaust
Prospeed High Flow Cats
Bright Light Tech Interior LED Light Conversion
BC Racing Coilovers
Science Of Speed Stainless Steel Brake Lines
Wings West Side Skirts
'02+ Rear Valence
Downforce NSX-R Spoiler
Difflow Rear Diffuser
Comptech Sway Bars
STMPO Front Chassis Bar
STMPO Rear Strut Tower Bar
Mugen Oil Cap
Titanium Exhaust Tips
S2CarbonWorks Aluminum Radiator Cooling panel
Bright Light Tech Taillight LED Conversion
'02+ Taillights
Pioneer ND-BC6 Backup Camera
Pioneer AVIC-Z150BH Navigation
Spoon Sports Radiator Cap
VIP Modular VR06 18x9 +30 19x11 +30
'02+ Intake Manifold Cover Plate
'02+ Intake Manifold Cover
Zoom Engineering Rearview Mirror
Spoon Sports Side Mirrors
Source 1 Sway Bar End Links
GRS 10SSW-4 10'' Shallow Mount Sub
Tectonic Elements TEBM65C20F-8 3 1/2'' BMR Full-Range Speaker
Custom Shift Knob
Custom Gauge Cluster Rings
LoveFab Twin Chamber Coolant Tank
Momo Mod 78 Steering wheel
NRG Short Hub
NRG Quick Release
VIS NSX-R Hood
Project Kic R40 Lug Nuts
NVX MVP4 AMP
Koyo Aluminum radiator
Enkei RP03 18x8.5 +30 19x10 +22
these should look familiar, these are the same wheels i had before. i sold my first set to a friend but regretted selling them. they're discontinued so the front specs were only in silver and the rear specs were only in black. i plan on powdercoating them white.
Enkei RP03 18x8.5 +30 19x10 +22
Untitled by diddy1226, on Flickr
B-Line Motorsports CAI
Comptech Headers
Taitec GTLW Exhaust
Prospeed High Flow Cats
Bright Light Tech Interior LED Light Conversion
BC Racing Coilovers
Science Of Speed Stainless Steel Brake Lines
Wings West Side Skirts
'02+ Rear Valence
Downforce NSX-R Spoiler
Difflow Rear Diffuser
Comptech Sway Bars
STMPO Front Chassis Bar
STMPO Rear Strut Tower Bar
Mugen Oil Cap
Titanium Exhaust Tips
S2CarbonWorks Aluminum Radiator Cooling panel
Bright Light Tech Taillight LED Conversion
'02+ Taillights
Pioneer ND-BC6 Backup Camera
Pioneer AVIC-Z150BH Navigation
Spoon Sports Radiator Cap
VIP Modular VR06 18x9 +30 19x11 +30
'02+ Intake Manifold Cover Plate
'02+ Intake Manifold Cover
Zoom Engineering Rearview Mirror
Spoon Sports Side Mirrors
Source 1 Sway Bar End Links
GRS 10SSW-4 10'' Shallow Mount Sub
Tectonic Elements TEBM65C20F-8 3 1/2'' BMR Full-Range Speaker
Custom Shift Knob
Custom Gauge Cluster Rings
LoveFab Twin Chamber Coolant Tank
Momo Mod 78 Steering wheel
NRG Short Hub
NRG Quick Release
VIS NSX-R Hood
Project Kic R40 Lug Nuts
NVX MVP4 AMP
Koyo Aluminum radiator
Enkei RP03 18x8.5 +30 19x10 +22
these should look familiar, these are the same wheels i had before. i sold my first set to a friend but regretted selling them. they're discontinued so the front specs were only in silver and the rear specs were only in black. i plan on powdercoating them white.
Enkei RP03 18x8.5 +30 19x10 +22
Untitled by diddy1226, on Flickr
The following 2 users liked this post by p.diddy:
iSeeYouTwo (11-24-2015),
rockstar143 (11-30-2015)
#774
The following users liked this post:
iSeeYouTwo (11-25-2015)
#776
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,031
wow, looks much much better!
i feel you on the wheels...went through the exact same bout with the advan RS I had on my previous S2000...I missed them so much...only difference is I kept in touch with the new owner who had bought mine for the rear only and had another set for the fronts, so he split the sets and sold them back to me. I ended up powderoating mega grey and couldn't be happier!
DSC_0418 by rock star, on Flickr
i feel you on the wheels...went through the exact same bout with the advan RS I had on my previous S2000...I missed them so much...only difference is I kept in touch with the new owner who had bought mine for the rear only and had another set for the fronts, so he split the sets and sold them back to me. I ended up powderoating mega grey and couldn't be happier!
DSC_0418 by rock star, on Flickr
The following users liked this post:
rockstar143 (11-30-2015)
The following 2 users liked this post by p.diddy:
ACCURATEin (12-01-2015),
rockstar143 (12-01-2015)
#787
#789
#791
Lol I do too but if I put them back on I don't want the same look I had before. I'm such a wheel whore who knows I might get another set and not even put them back on even longer.
#797
The following 11 users liked this post by p.diddy:
00TL-P3.2 (12-03-2015),
DAYTA (12-07-2015),
Flipster23 (12-03-2015),
HeartTLs (12-04-2015),
mattg (12-03-2015),
and 6 others liked this post.
The following users liked this post:
HeartTLs (12-04-2015)
#800
im loving it. as many sets of wheels ive had in my life ive never done white, so i finally wanted to give it a try. they're so bright. that with the red paint is going to pop on a sunny day.