Out with the old, in with the new(er) - BlackAck's 4Runner thread
The following users liked this post:
KaMLuNg (02-15-2019)
The following users liked this post:
rockstar143 (02-16-2019)
#1648
The following users liked this post:
rockstar143 (02-16-2019)
The following users liked this post:
rockstar143 (02-16-2019)
#1656
Thread Starter
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Joined: Jan 2005
Posts: 92,262
Likes: 4,489
From: ShitsBurgh
Started finally populating my rear storage panels with some molle bags, a fire extinguisher and a Maglite. I went through hell getting this extinguisher mount, they sent me a rusty half assed powder coated one and then made me wait 2 months for a replacement. My first test fit I mounted it backwards lol
I tried mounting it sideways and everything fit at first, however I mounted it just slightly too close to the quick fists and the extinguisher wouldn't seat all the way into the mount. So that wasn't going to work.
So I went ahead and flipped the mount vertical since it can go both ways.
I got that all mounted up and happy, my OCD likes the line up better for now at least.
And here it is installed back in the truck, I remounted the First Aid kit, but it wasn't fitting the space very well.
I picked up a cheap molle bag for tools, and got a set of tools on clearance so I threw them in the bag. I also picked up a cheap socket set which I have to figure out how to mount somewhere.
Mounted the tool bag, will probably shift it around more when I add more stuff.
I moved the First Aid kit to the other side to be easily reachable if needed in an emergency.
Still need to mount a few more things, but it was 35 deg out and I was cold lol.
I tried mounting it sideways and everything fit at first, however I mounted it just slightly too close to the quick fists and the extinguisher wouldn't seat all the way into the mount. So that wasn't going to work.
So I went ahead and flipped the mount vertical since it can go both ways.
I got that all mounted up and happy, my OCD likes the line up better for now at least.
And here it is installed back in the truck, I remounted the First Aid kit, but it wasn't fitting the space very well.
I picked up a cheap molle bag for tools, and got a set of tools on clearance so I threw them in the bag. I also picked up a cheap socket set which I have to figure out how to mount somewhere.
Mounted the tool bag, will probably shift it around more when I add more stuff.
I moved the First Aid kit to the other side to be easily reachable if needed in an emergency.
Still need to mount a few more things, but it was 35 deg out and I was cold lol.
The following 2 users liked this post by 97BlackAckCL:
00TL-P3.2 (02-18-2019),
CCColtsicehockey (02-18-2019)
The following users liked this post:
97BlackAckCL (02-18-2019)
#1660
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Joined: Dec 2003
Posts: 43,655
Likes: 3,885
From: Mooresville, NC
Now I am just being picky and OCD but I feel like the fire extinguisher, first aid, and paper towel should all be on the same side. They kind of all go together. Then all your tools and light on the other side.
#1661
Thread Starter
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Joined: Jan 2005
Posts: 92,262
Likes: 4,489
From: ShitsBurgh
The extinguisher can't go where the first aid kit is because the third row seat belt would clang on it, I wanted it closer to the rear hatch but had to avoid those seat belts
The following users liked this post:
97BlackAckCL (02-19-2019)
#1664
The following users liked this post:
97BlackAckCL (02-19-2019)
#1676
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Joined: Dec 2003
Posts: 43,655
Likes: 3,885
From: Mooresville, NC
The following users liked this post:
97BlackAckCL (02-19-2019)