Gone very far to the Dark Side - Cobra Kit
#202
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Worked on the electrical & interior this week. Got the main power bus installed from the trunk mounted battery to the starter solenoid & the main distribution block.
As part of the console added a kill switch for the cars electrical system. It the red switch between the seats. When it off you can pull the red toggle out.
![](http://f30.bimmerpost.com/forums/picture.php?albumid=5716&pictureid=53310)
Built the aluminum sheet metal lower console for the radio, some pulls, warning lights & toggle switches. Waiting on 2 toggles & 1 warning light to finish it off.
![](http://f30.bimmerpost.com/forums/picture.php?albumid=5716&pictureid=53311)
Got foam padding & leather covering at a local fabric outlet & used that to cover the whole unit right to the rear cockpit wall. With power up front I can start to hook up the various ECU’s that control the engine. Slow meticulous work trying to find the right wire to graft out of large cable bundles.
As part of the console added a kill switch for the cars electrical system. It the red switch between the seats. When it off you can pull the red toggle out.
Built the aluminum sheet metal lower console for the radio, some pulls, warning lights & toggle switches. Waiting on 2 toggles & 1 warning light to finish it off.
Got foam padding & leather covering at a local fabric outlet & used that to cover the whole unit right to the rear cockpit wall. With power up front I can start to hook up the various ECU’s that control the engine. Slow meticulous work trying to find the right wire to graft out of large cable bundles.
The following 3 users liked this post by BEAR-AvHistory:
#205
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
![Thud!](https://acurazine.com/forums/images/smilies/thud.gif)
gonna post some motivation for you in a bit
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#206
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
#207
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Here you go brother....
say this at a local meet...had a similar exhaust that I was talking about![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
DSC_2029 by Anil Sadhwani, on Flickr
DSC_2023 by Anil Sadhwani, on Flickr
say this at a local meet...had a similar exhaust that I was talking about
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![](https://farm3.staticflickr.com/2911/14469638879_6603d29f08_c.jpg)
![](https://farm4.staticflickr.com/3849/14655905052_270cb1192e_c.jpg)
The following 3 users liked this post by swoosh:
#208
Moderator
^
![Thud!](https://acurazine.com/forums/images/smilies/thud.gif)
The following users liked this post:
swoosh (07-16-2014)
#210
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
saw* not say ![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
proof reading before posting sure aint me
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
proof reading before posting sure aint me
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
#211
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Damn, that thing looks sick!
#212
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
That's the one my son in law wants to build. Same basic chassis with some additional framework for the roof, so he figures I will be helping him out![Devil grin](https://acurazine.com/forums/images/smilies/devilgrin.gif)
Cool thing about the meatballs & sponsor decals, they are static cling pieces so you can put them on or take them off when you want. Mine is "45"
![Devil grin](https://acurazine.com/forums/images/smilies/devilgrin.gif)
Cool thing about the meatballs & sponsor decals, they are static cling pieces so you can put them on or take them off when you want. Mine is "45"
Last edited by BEAR-AvHistory; 07-16-2014 at 04:32 PM.
#214
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
![Chuckle](https://acurazine.com/forums/images/smilies/chuckle.gif)
69 for me
![:O](https://acurazine.com/forums/images/smilies/embarrassment.gif)
#215
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Cockpit floor riveted & bonded in. Started to fit the base insulation layer. Two aluminum faces with a plastic airspace core. Product is called Reflectix & is used as an attic insulation stapled to the roof trusses.
![](http://www.bimmerfest.com/forums/picture.php?albumid=9814&pictureid=44380)
Will glue it down tomorrow.
Need to take a break from the Cobra to rebuild the A/C unit in the Xterra. After 12 years its still holding its initial gas charge but the compressor clutch has died. Installing a new Compressor W/clutch, Accumulator/Dryer, Expansion valve & orifice tube.
Will glue it down tomorrow.
Need to take a break from the Cobra to rebuild the A/C unit in the Xterra. After 12 years its still holding its initial gas charge but the compressor clutch has died. Installing a new Compressor W/clutch, Accumulator/Dryer, Expansion valve & orifice tube.
The following users liked this post:
ttribe (07-18-2014)
#216
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
get your priorities straight dude !!!
Loving the progress good Sir...
Loving the progress good Sir...
#218
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
You sit alongside the transmission & your legs are next to the engine block so heat protection is more important than sound reduction. You can see the last two header tubes alongside the foot box if you look just below the clutch quadrant in the picture.
Besides side pipes with no windows or top do not play well with creating a quite car.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Last edited by BEAR-AvHistory; 07-18-2014 at 05:58 PM.
The following users liked this post:
rockstar143 (07-18-2014)
#219
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
#220
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Dash is wired, moving on to engine management system. Hope to have a running Go-Cart in August.
![](http://www.bimmerfest.com/forums/picture.php?albumid=9814&pictureid=44433)
Last edited by BEAR-AvHistory; 07-22-2014 at 01:16 PM.
The following 2 users liked this post by BEAR-AvHistory:
justnspace (07-22-2014),
ttribe (07-22-2014)
#222
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Thanks for the kind words. Got the lower console finished & need to wire that up to where the under door speakers go. Rest is self contained in the box & the big pile of blue orange & yellow wires at the far left marked "heat" will drop down into the console & plug in.
#223
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Honestly, like with anything...when you're elbow deep in it, it feels intuitive and logical and probably somewhat therapeutic, but from the outside, it's really impressive, overwhelming and awe inspiring. Seriously...
You'd have someone see it assembled and be like, oh cool...kit car you built...how hard can it possibly be?![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
VERY!
You'd have someone see it assembled and be like, oh cool...kit car you built...how hard can it possibly be?
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
VERY!
#224
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
hubba fucking hubba....
looking AWESOME dude
looking AWESOME dude
#225
Someday, an RS6 Avant+
Looks great. I wish I had the talent/time/money/wife that would allow it.
#227
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Multi-tasking this week. Boring stuff so I like to change off. Installing first of 3 computers & major harness, engine cooling & interior heating.
Computers black plastic face is covered with the heat shield material. The other side has a heat sink on it.
Computers black plastic face is covered with the heat shield material. The other side has a heat sink on it.
The following users liked this post:
ttribe (07-31-2014)
The following users liked this post:
BEAR-AvHistory (07-31-2014)
#229
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
i like the blue ![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
looking great as always sir
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
looking great as always sir
The following users liked this post:
BEAR-AvHistory (07-31-2014)
#230
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
No all black is nice. Main goal was chafe protection for all the lines.
I was playing with red fuel, blue water, X for vacuum/air & black for wires. Top of the engine is covered when in use so between the body position & the engine cover I don't think you will see much of the covering.
I was playing with red fuel, blue water, X for vacuum/air & black for wires. Top of the engine is covered when in use so between the body position & the engine cover I don't think you will see much of the covering.
#232
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
haha it is what it is....i like blue ![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
but that is an awesome way to go about distinguishing between hoses there dude...
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
but that is an awesome way to go about distinguishing between hoses there dude...
The following users liked this post:
CLtotheTL32 (07-31-2014)
#234
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
I dont hate teal...around KC atleast I have seen a ton of cars going from blue/red parts (caliper and stuff) to teal....
teal is a beautiful color
teal is a beautiful color
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
#236
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Getting to the hard part but closer to the phase 1 finish. Should have a running car this month. Definite Maybe ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Main ECU is heat shielded & installed. Engine leads roughed out.
![](http://www.bimmerfest.com/forums/picture.php?albumid=9814&pictureid=44617)
The black box is called the Black Box its a small computer that drives the peripherals, fan, fuel pump, various sensors, instruments etc. The black shape to its right is the heater core & distribution points.
![](http://www.bimmerfest.com/forums/picture.php?albumid=9814&pictureid=44615)
The rest of the snake pit attaches to various engine sensors, alternator, starter etc.
![](http://www.bimmerfest.com/forums/picture.php?albumid=9814&pictureid=44616)
Once the lines are roughed out will neaten them up & clamp them in place.
Then its engine cooling, radiator, hoses, overflow tank & coolent. Finally put some oil in under pressure to pre-lube the engine.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Main ECU is heat shielded & installed. Engine leads roughed out.
The black box is called the Black Box its a small computer that drives the peripherals, fan, fuel pump, various sensors, instruments etc. The black shape to its right is the heater core & distribution points.
The rest of the snake pit attaches to various engine sensors, alternator, starter etc.
Once the lines are roughed out will neaten them up & clamp them in place.
Then its engine cooling, radiator, hoses, overflow tank & coolent. Finally put some oil in under pressure to pre-lube the engine.
Last edited by BEAR-AvHistory; 08-05-2014 at 06:45 PM.
The following 3 users liked this post by BEAR-AvHistory:
#238
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Its something you always do on a fresh engine. In the bad old days you pulled the distributor. The bottom has a tang that fits into a slot on the oil pump drive shaft. We has a shaft like tool the fit the distributer hole & had a tang to engage the oil pump drive. Pour in your oil, hook a high speed drill to the tools shaft & watch your oil gauge for pressure.
Today with distributor less engines you can use a small pressure tank or even a yard pump-up spray tank. Attach a NPT fitting that will screw into the oil pressure bung on the block to the tanks hose. Fill the oil pan less one quart. Put the quart into your pressure vessel then turn on your compressor or pump the handle Oil will be forced throughout the system.
Today with distributor less engines you can use a small pressure tank or even a yard pump-up spray tank. Attach a NPT fitting that will screw into the oil pressure bung on the block to the tanks hose. Fill the oil pan less one quart. Put the quart into your pressure vessel then turn on your compressor or pump the handle Oil will be forced throughout the system.
#240
Suzuka Master
Thread Starter
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Main reason is to be sure the engine does not have to spin up dry before it gets oil into the bearing & wear surfaces. Fittings/sensor leaks will also show up. In the old days a bad pump, pickup would show but not today.
Last edited by BEAR-AvHistory; 08-06-2014 at 08:41 AM.