When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
And for under $300... you can't buy them used for under $1200
I've been eyeing the Neuspeed wheels. They're pretty light, and they look good. The stock Englishtowns are ~25 (!!!) pounds each.
They're so heavy though... And most OE VW wheels aren't that strong.
Neuspeed is equally as expensive though at ~$1300 a set but now the GTI is even shipping with the black pretorias so maybe the price will start to go down? Konig Oversteers are heavier but WAY cheaper for a set. I personally don't even care about the weight at this point, they are just fugly.
Originally Posted by StreetKA
RPF1 are too soft for daily, bends way too easily, unless you have super smooth roads that would worry me
Yeah, our roads are about as far from smooth as it gets...
Originally Posted by StreetKA
i really dig those Braid wheels pictured on WRC Hyundai i30. May not be cheap
Actually not bad at $250-$300 a wheel. I just don't want the rally car look, I didn't buy a Subaru lol.
Okay then the answer is usually RPF1 then.
I am still partial to Regamasters and Weds TC105N...and of course Advan but I closed that chapter in my life
I've been eyeing the TCs...
Originally Posted by StreetKA
RPF1 are too soft for daily, bends way too easily, unless you have super smooth roads that would worry me
Agreed. Plus, at higher offsets, like the MK7 would require, they look weak as fuck.
Originally Posted by SamDoe1
Neuspeed is equally as expensive though at ~$1300 a set but now the GTI is even shipping with the black pretorias so maybe the price will start to go down? Konig Oversteers are heavier but WAY cheaper for a set. I personally don't even care about the weight at this point, they are just fugly.
True. I have a love-hate relationship with the Englishtowns - when they are clean, I love them. When they're dirty, I think they're the worst wheel known to man.
I worked with a guy from the MK7 forums (gti_jake aka Baun Performance) on modifying his GTI kit for the R. Thankfully, it didn't take a lot to get it to work properly. It's 100% reversible and required zero cutting to the bumper, or anything else, really. Since I'm still breaking in the clutch, I can't get on it to see what sort of benefit I'm seeing at WOT, but it's already cut the cruising temp delta by about half - the ambient temp was 59°, I was seeing between 68 and 72° after the IC, where I'd usually see 80-90° in the same circumstances. I can't wait to see how it performs this summer.
Sick bro...
but the front mount replace the need for meth?
is meth a thing for the golf?
I'm sure there's a lot of meth near you.
I was thinking of running meth to cool the charge a bit more, but my tuner doesn't like it and would prefer I don't. So those bungs may just sit there unused.unused. If I were to eventually run meth, I'd probably just run it off the washer fluid reservoir, since washer fluid is easy to get and contains alcohol.
Not a huge fan of meth for a daily driven car either. If you like to do any sort of road tripping and your tune is based on that cooling it just opens you up to lots of chances of being stuck without and thus risk of your tune being wrong for conditions. I get that you could have a seperate tune you could load but that just seems like a lot of added headache again for a daily.
Okay then the answer is usually RPF1 then.
I am still partial to Regamasters and Weds TC105N...and of course Advan but I closed that chapter in my life
Man some TC105N would look great on the R especially if you were able to run a concave fitment.
Man some TC105N would look great on the R especially if you were able to run a concave fitment.
I would love some TC105Ns, but unfortunately I can't run a very aggressive setup on this car. If I run an 8.5" wide wheel, I'd have to stay in the +40-44mm offset range in order to run a 245 or 255
I'm looking at these Neuspeeds (and I can run the VW center cap on them):
But if funds allow, I'll spring for some Titan7 forged wheels:
I may be willing to run wobble bolts so I can run a 5x114 wheel, so really the options are plentiful.
Originally Posted by CCColtsicehockey
This would have never crossed my mind but this is an awesome idea if running meth and have a car that actually has a sensor for that.
Supposedly the R has the sensor, I just need to code it.
Last edited by civicdrivr; 02-20-2019 at 08:39 AM.
Those look like a lot of metoo wheels nowadays...
that said, they are that way because they are a very classic and nice look.
I wanted them for the V...and @ebelp had ones for his SRT.
Out of those two wheels the Titan7 look much better. Look a lot like a set of wheels BBS makes.
Agreed. And for 18x8.5s, they're just under 18lbs too. And forged. They're probably the direction I'll end up going because of those two reasons, even though they're about $600 more for the set compared to the Neuspeeds (which are around 20lbs each and flow-formed).
Originally Posted by rockstar143
Those look like a lot of metoo wheels nowadays...
that said, they are that way because they are a very classic and nice look.
I wanted them for the V...and @ebelp had ones for his SRT.
Agreed, but unfortunately, the metoo wheels look good lol
I'd run a set of TEs or CEs if I could get an aggressive fitment, but the car just isn't built for it.
Too poor to afford $2000 wheels? You are full of shit.
You are too SMART to spend that on wheels because you don't feel the perceived value is worth it.
I know because you aren't stressed to take longer to sell your S2000 at a premium...
and your growing wood working hobby...and bragging about cost of living being like 5% in
comparison to rest of America. And you're smart and probably good at what you do and
make a good living.
Too poor to afford $2000 wheels? You are full of shit.
You are too SMART to spend that on wheels because you don't feel the perceived value is worth it.
I know because you aren't stressed to take longer to sell your S2000 at a premium...
and your growing wood working hobby...and bragging about cost of living being like 5% in
comparison to rest of America. And you're smart and probably good at what you do and
make a good living.
Too poor and too smart?
To be fair though, I took the S2k off the market for the winter because no one is going to want to look at it now and I take the liability insurance off of it during the winter so it has been sitting for a while not on sale just like it did last winter. It'll go back on the market in the spring but I'm in no huge hurry to sell, it's too fun to be in a hurry to get rid of it.
Also, I brag about the CoL being much cheaper here than in CA and in the NE, I'm sure it's pretty comparable to FL and other parts of the country.
As far as smart and make a good living, I'm not rich but I can't complain about my situation.
Nailed it.
See...pulled off market during winter...removed liability.
You are smart as fuck.
And for the record...right this moment I'm totally with you on NOT spending 2k on wheels...
fuck that...different place in my life, different priorities.
Agreed. That's why I haven't done it yet (especially since tires will be another $900...). I'm just waiting for a clean set to come up on the used marked I've never purchased wheels new. Ever. It's throwing money away.
Agreed. That's why I haven't done it yet (especially since tires will be another $900...). I'm just waiting for a clean set to come up on the used marked I've never purchased wheels new. Ever. It's throwing money away.
This! 10038940980239894823908x The best part is after that initial value drop in wheels they don't ever really drop anymore unless you curb them.
I can't believe I'm just now finding your thread! I know your car from Jake's front mount thread when he posted pics of your install. I see you're leaning towards EQT and I think that's the best turbo out right now. That's what I would get if I was AWD. I thought about going that route, but I ultimately don't want to touch HPFP/LPFP and that's where that turbo shines. Your car will be a monster with that setup.
I can't believe I'm just now finding your thread! I know your car from Jake's front mount thread when he posted pics of your install. I see you're leaning towards EQT and I think that's the best turbo out right now. That's what I would get if I was AWD. I thought about going that route, but I ultimately don't want to touch HPFP/LPFP and that's where that turbo shines. Your car will be a monster with that setup.
Thanks man! The EQT should be fun as hell, and I'm looking forward to it. But, I almost pulled the trigger on a used APR kit (EFR7163) two days ago. The only reason I decided to hold off is because I'd like to do some house stuff this spring The EFR is my dream turbo for this car though - ball bearing, 30psi around 3k rpm, and tons of potential. If I were to throw some rods and pistons into my motor, over 500whp and high 400wtq is easy. But...priorities
It should still be pretty fun with the EQT, though I wish there were more ball bearing options for us.