CLOSED! FS: 6 speed cl custom clutch kit and 9 lb. flywheel
11-13-2006, 12:04 PM
#1
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
CLOSED! FS: 6 speed cl custom clutch kit and 9 lb. flywheel
6 speed cl custom clutch kit and 9 lb. flywheel for a 2003 cl-s 6 speed
this is a one off flywheel and clutch kit,,, disk is a 6 puck KEVLAR! heavy duty sprung for up to 1200 hp, the pressure plate is a sachs racing development heavy duty,--- the flywheel is a one off clutchmasters 9 lb super light T-6 military grade aluminum with military grade fasteners and replaceable extreme duty contact face.. looking for $1000 but make me an offer, if u call clutchmasters to build this it will cost you over 2g's..
NO lowballers please, and shipping will be done via u,s,postal or fed ex or ups.. your choice with signature and tracking and insurance only,at actual cost.
this is a one off flywheel and clutch kit,,, disk is a 6 puck KEVLAR! heavy duty sprung for up to 1200 hp, the pressure plate is a sachs racing development heavy duty,--- the flywheel is a one off clutchmasters 9 lb super light T-6 military grade aluminum with military grade fasteners and replaceable extreme duty contact face.. looking for $1000 but make me an offer, if u call clutchmasters to build this it will cost you over 2g's..
NO lowballers please, and shipping will be done via u,s,postal or fed ex or ups.. your choice with signature and tracking and insurance only,at actual cost.
Last edited by cl8trr; 11-13-2006 at 12:07 PM.
11-13-2006, 02:08 PM
#2
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
$975?
11-13-2006, 04:39 PM
#4
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
6 speed cl custom clutch kit and 9.7 lb. flywheel for a 2003 cl-s 6 speed
this is a one off flywheel and clutch kit,,, disk is a 6 puck KEVLAR! heavy duty (sprung) for up to 1200 hp, the pressure plate is a sachs racing development heavy duty,--- the flywheel is a one off clutchmasters 9.7 lb super light T-6 military grade aluminum with military grade fasteners and replaceable extreme duty contact face.. looking for $1000 but make me an offer, if u call clutchmasters to build this it will cost you well over 2g's..(909)877-6800 clutchmasters
NO lowballers please, and shipping will be done via u,s,postal or fed ex or ups.. your choice with signature and tracking and insurance only,at actual cost. will accept cash pay-pal or certified bank check only, preffer local pickup in so-cal. locals got 1st dibs unless your pay-pal verified and pay before they get here. *remember this is a balanced flywheel with factory gear ring,its made of solid t-6 billet aluminum(not 2nd class t-6) one off cost to make about$1800-------------------*pressure plate is a sach's racing hd non self adjusting$if you have this made it will cost you roughly$450-600------------------------------------------------------------------*clutch disk is made of KEVLAR! strongest longest lasting clutch material their is period..to have this made roughly $450
this is a one off flywheel and clutch kit,,, disk is a 6 puck KEVLAR! heavy duty (sprung) for up to 1200 hp, the pressure plate is a sachs racing development heavy duty,--- the flywheel is a one off clutchmasters 9.7 lb super light T-6 military grade aluminum with military grade fasteners and replaceable extreme duty contact face.. looking for $1000 but make me an offer, if u call clutchmasters to build this it will cost you well over 2g's..(909)877-6800 clutchmasters
NO lowballers please, and shipping will be done via u,s,postal or fed ex or ups.. your choice with signature and tracking and insurance only,at actual cost. will accept cash pay-pal or certified bank check only, preffer local pickup in so-cal. locals got 1st dibs unless your pay-pal verified and pay before they get here. *remember this is a balanced flywheel with factory gear ring,its made of solid t-6 billet aluminum(not 2nd class t-6) one off cost to make about$1800-------------------*pressure plate is a sach's racing hd non self adjusting$if you have this made it will cost you roughly$450-600------------------------------------------------------------------*clutch disk is made of KEVLAR! strongest longest lasting clutch material their is period..to have this made roughly $450
11-13-2006, 04:45 PM
#6
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
yes the disk has all 12 pucks brand new, the flywheel has a brand new insert and the pressure plate is brand new. *** ALL SFI approved***.. if you are local you are welcome to come check it out, most other places arent even willing to put out the money for R&D for this set-up, but with some connections and a lot of asskissing I got this whole setup made by the one and only clutchmasters.
11-13-2006, 04:48 PM
#7
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
but I have tested this set-up with boost and it works sweet bro, it may be overkill for a stock cl-s 6 speed though, since I am returning my car back to stock its up for grabs, no longer need this much for a now type S-low.
Trending Topics
11-13-2006, 05:15 PM
#8
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cl8trr
but I have tested this set-up with boost and it works sweet bro, it may be overkill for a stock cl-s 6 speed though, since I am returning my car back to stock its up for grabs, no longer need this much for a now type S-low.
11-14-2006, 03:54 PM
#9
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
compare it to comptech, much better all around and it comes with a hd pressure plate, if this dont sell in a couple of days I may just reinstall it in the 6sp cl-Slow, come on guys$975.oo thats dirt cheap for this setup
11-14-2006, 07:25 PM
#10
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
PRICE DROP- lightweight flywheel kevlar 6 puck clutch and hd pressure plate
IM lowering to $ 850!!! I will give you guys one more shot before I try to list it on e-bay,, this is better than any comptech or spec setup!
11-14-2006, 07:41 PM
#11
how about a pic of the other side of the pressure plate?
will the stock pressure plate bolt up to this flywheel?
will the stock pressure plate bolt up to this flywheel?
11-14-2006, 07:50 PM
#12
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
it will bolt on ? never tried it though, dont know how it would function? this set-up was made specifically to work in conjunction with each other, the diameter of the plate and stiffness of the teeth are much higher than stock, pressure plate is brand new! specs are the same as my last one, it looks a little dirty because of ther grease I had on my hands but surface does not have a single scratch much less a heat spot on it..
11-14-2006, 07:56 PM
#13
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
my email is cl8trr@yahoo.com
11-14-2006, 10:53 PM
#14
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
here is the face of the pressure plate for those requesting through e-mail
11-16-2006, 01:03 PM
#15
Racer
Thread Starter
Join Date: Aug 2005
Location: Laguna , So-cal
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
I am reinstalling this one back since their was no buyer interest.
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
handsom-hustla
Car Parts for Sale
70
11-13-2015 05:04 PM
Yumcha
Automotive News
2
09-04-2015 08:03 AM
