PoTMiLKz Progress Thread
surprisingly its not that loud.. there is a small drone inside the car but im sure after about 800-1000 miles it will go away.. either way im satisfied.. the car sounds so aggressive.. ill do a clip soon
a little update.. i got the tires mounted on Saturday.. and was not able to drive out of the tire shop because i needed my fenders rolled or else it will pretty much eat up my tires.. i have an appointment this sat to roll my fenders.
wheel specs:
20x9.5 +12 all around
245/35/20 Falken Azenis PT-722
the PT-722 just barely released. i was told that it was good from my friend that owns a tire shop and they were pretty cheap.. 470 for a set mounted and balanced.
here was a test fit, i tested it on 1 side of the car..
full shot.

side rear

rear passenger

rear passenger

Front driver (need to go lower)

Front Driver

Font Driver

Front Driver

Rear Passenger (the rears will tuck in good)

Front Driver

Front Driver

Im think the fronts are a bit extreme... as i dont think they will fit without a slight camber.. although i do not like to camber, i think just a little will do.
oh and i also did this mod a while back..



its a whole lot brighter than the stock socket bulb..
the power is running from that one socket bulb, i just split it up to 2 separate led modules.
this is one i used.
wheel specs:
20x9.5 +12 all around
245/35/20 Falken Azenis PT-722
the PT-722 just barely released. i was told that it was good from my friend that owns a tire shop and they were pretty cheap.. 470 for a set mounted and balanced.
here was a test fit, i tested it on 1 side of the car..
full shot.

side rear

rear passenger

rear passenger

Front driver (need to go lower)

Front Driver

Font Driver

Front Driver

Rear Passenger (the rears will tuck in good)

Front Driver

Front Driver

Im think the fronts are a bit extreme... as i dont think they will fit without a slight camber.. although i do not like to camber, i think just a little will do.
oh and i also did this mod a while back..



its a whole lot brighter than the stock socket bulb..
the power is running from that one socket bulb, i just split it up to 2 separate led modules.
this is one i used.
Last edited by potmilkz; Sep 11, 2012 at 11:30 PM.
^^^ Agreed it looks too aggressive but is that you wanted that's what matters. I like the wheel style, it looks like Hamann PG2 wheel.
Where did you get the LED for the trunk?
Where did you get the LED for the trunk?
yea i know.. i need more barrel in the rear tho as i have a lot of room in the inside.. might switch the barrel out for a barrel 1 inch bigger to make it 10.5 for the rear.
i was told by my fender rolling guy that it will fit. i may have to throw off the caber in the front slightly, but not enough to make a drastic difference to where i will have camber wear on my tires.
i bought it off some website. the lighting is great, its more white then blue.. camera just made it look blue.
thanks!
gotta wait for saturday for update.
thanks!
gotta wait for saturday for update.
they look good pot
i don't think you are gonna need camber for the front, in fact if you lower the front a bit more,you will get some natural camber and you should be fine.
GL with fenders, lil advice when front fenders are being done i recommend not rolling them because they can easily be damaged.
i don't think you are gonna need camber for the front, in fact if you lower the front a bit more,you will get some natural camber and you should be fine.
GL with fenders, lil advice when front fenders are being done i recommend not rolling them because they can easily be damaged.
ehh the guy is a professional. he is well known in the hellaflush industry as the guy to go to when rolling fenders.. so there will be no damage to my fenders at all.
its a nice city. night life is ok, there is alot of good places to eat at pasadena.
you should try gyu-kaku kbbq if you like to eat and drink.
there are also some hole in the wall places that you should try too. yelp it
That is so funny... Both times we saw you, I turned to him and said, "Aw see babe? Now I miss the TL!"




























