Feeler RV6 09+ TL Precat Deletes and High Flow Precats
#162
Instructor
FYI the polished set are ceramic coated, which is an additional option available for PCD's. I don't believe you can get the hfpc coated, could be mistaken. I believe Richie said to get the polished ceramic coating would be an 80$ option.
#164
Former Sponsor
Thread Starter
Those PCDs are HFPCs are all for the 3rd gen TL and 7gen accords. We will be getting the first couple of 4th gen parts this week. Please be patient guys the end is almost here.
#168
If you look in his site, there are no specific 4th gen TL PCDs.
Applications:
- Honda Accord (V6) 08+
- Honda Pilot 09+
- Honda Ridgeline 09+
- Honda Odyssey 09+
- Acura TL 09+
- Acura TSX (V6) 09+
- Acura RL 09+
So all of the initial 20, now 25 sets have been spoken for since March.
Applications:
- Honda Accord (V6) 08+
- Honda Pilot 09+
- Honda Ridgeline 09+
- Honda Odyssey 09+
- Acura TL 09+
- Acura TSX (V6) 09+
- Acura RL 09+
So all of the initial 20, now 25 sets have been spoken for since March.
#169
I would imagine that if anyone backed out, then the next person in line would receive the vacated spot.
He initially said twenty sets. Then he has to redo the design and now it's at 25 sets. I wonder if that is the cause for the increased delay. Going from 20 to 25 sets probably didn't help things.
He initially said twenty sets. Then he has to redo the design and now it's at 25 sets. I wonder if that is the cause for the increased delay. Going from 20 to 25 sets probably didn't help things.
#171
Instructor
If you look in his site, there are no specific 4th gen TL PCDs.
Applications:
- Honda Accord (V6) 08+
- Honda Pilot 09+
- Honda Ridgeline 09+
- Honda Odyssey 09+
- Acura TL 09+
- Acura TSX (V6) 09+
- Acura RL 09+
So all of the initial 20, now 25 sets have been spoken for since March.
Applications:
- Honda Accord (V6) 08+
- Honda Pilot 09+
- Honda Ridgeline 09+
- Honda Odyssey 09+
- Acura TL 09+
- Acura TSX (V6) 09+
- Acura RL 09+
So all of the initial 20, now 25 sets have been spoken for since March.
![Roll Eyes](https://acurazine.com/forums/images/smilies/rolleyes.gif)
I would imagine that if anyone backed out, then the next person in line would receive the vacated spot.
He initially said twenty sets. Then he has to redo the design and now it's at 25 sets. I wonder if that is the cause for the increased delay. Going from 20 to 25 sets probably didn't help things.
He initially said twenty sets. Then he has to redo the design and now it's at 25 sets. I wonder if that is the cause for the increased delay. Going from 20 to 25 sets probably didn't help things.
Edit: The initial number he mentioned was 20.
Last edited by tommypenguin; 11-07-2011 at 10:54 PM.
#173
#177
WDP 4G
iTrader: (8)
Is anyone else coming out with HFPC/PCDS? I got this reply from Richie have no idea how to interpret it
Originally Posted by eazy
Hey I've been trying to ask you if you had sound clips of the HFPC and PCD but you never answer my post on your thread.
Nothing for the 4G TL we only made one set and tested them on the 8G accord.
So til this day now theres still only 1 set of PCD made for 4G's? Or there are no sounds clips for 4G's?
Originally Posted by eazy
Hey I've been trying to ask you if you had sound clips of the HFPC and PCD but you never answer my post on your thread.
Nothing for the 4G TL we only made one set and tested them on the 8G accord.
So til this day now theres still only 1 set of PCD made for 4G's? Or there are no sounds clips for 4G's?
#178
Former Sponsor
Thread Starter
Sorry for the delays guys. I much rather you guys be mad at me for having to wait then having a part failure or fitment issue.
No sound clips on the TL. As I have said before these for developed for the 8th gen accord. The 4th gen TL shares the same part as the 8th gen Accord. There was only one set of prototype PCDs made to test compatibility with the ECU. The rest of the time has been spent waiting to hit 25 deposits and for the production of castings. The castings are custom made for this application. Without them I can't proceed, its not like I can get them off the shelf and weld them together.
Nice to know you are still around. The first 50+ sets are accounted for
Once everything is confirmed the second batch will be made much faster and contain more then enough sets to fill the orders.
It can be done on both, I am not sure on the exact cost yet. I am pretty sure the HFPCs can't be polished since its done in a wet bath of stones.
Depends on when you deposited, batch 2 is still 6-10 weeks out. Batch one welding starts next week.
Yes, the 25 sets are going out to all compatible models.
No sound clips on the TL. As I have said before these for developed for the 8th gen accord. The 4th gen TL shares the same part as the 8th gen Accord. There was only one set of prototype PCDs made to test compatibility with the ECU. The rest of the time has been spent waiting to hit 25 deposits and for the production of castings. The castings are custom made for this application. Without them I can't proceed, its not like I can get them off the shelf and weld them together.
Nice to know you are still around. The first 50+ sets are accounted for
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
Depends on when you deposited, batch 2 is still 6-10 weeks out. Batch one welding starts next week.
Yes, the 25 sets are going out to all compatible models.
#179
WDP 4G
iTrader: (8)
No sound clips on the TL. As I have said before these for developed for the 8th gen accord. The 4th gen TL shares the same part as the 8th gen Accord. There was only one set of prototype PCDs made to test compatibility with the ECU. The rest of the time has been spent waiting to hit 25 deposits and for the production of castings. The castings are custom made for this application. Without them I can't proceed, its not like I can get them off the shelf and weld them together.
#180
Three Wheelin'
Richie, when will you be looking to collect payment for those who placed an order within the first 25 batch?
How can I ensure that I also get the ceramic coating?
If you say you're welding next week, are you collecting full payments now - and then those who have paid can expect to receive these by Christmas?
How can I ensure that I also get the ceramic coating?
If you say you're welding next week, are you collecting full payments now - and then those who have paid can expect to receive these by Christmas?
#181
Former Sponsor
Thread Starter
Deposit here
#183
Former Sponsor
Thread Starter
#184
Former Sponsor
Thread Starter
Final payment options have been added to the website. Get your orders in so we can start welding these bad boys up.
http://www.rv6-performance.com/index...d=11&Itemid=61
http://www.rv6-performance.com/index...d=11&Itemid=61
#189
Former Sponsor
Thread Starter
Everyone on the first batch got a email.
#191
Former Sponsor
Thread Starter
My welder just finished the first 12 sets of PCDs. They will be sent out of ceramic coat right away. We should have some HFPCs pics up soon.
![](http://www.rv6-performance.com/images/RV68thGenPCD.jpg)
#192
Drifting
iTrader: (5)
Rich I spoke with you briefly last week about my placement on the list and you told me I'm in the 1st 20, that a few people cancelled/postponed their orders because they didn't have the money available right now, asked me if I wanted a PCD or HFPC and that you'd get back to me shortly. Waiting on your reply i never sent full payment and you never sent me an e-mail or phone call to follow up. Does that mean I'm at the top of the 2nd batch? And if so when do you project the 2nd batch to be ready for shipment?
#193
Former Sponsor
Thread Starter
Rich I spoke with you briefly last week about my placement on the list and you told me I'm in the 1st 20, that a few people cancelled/postponed their orders because they didn't have the money available right now, asked me if I wanted a PCD or HFPC and that you'd get back to me shortly. Waiting on your reply i never sent full payment and you never sent me an e-mail or phone call to follow up. Does that mean I'm at the top of the 2nd batch? And if so when do you project the 2nd batch to be ready for shipment?
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#195
Three Wheelin'
Oh man this is going to be amazing... I've been waiting to swap my XLR8 pipes till I can do the these and the long-tube all at once ![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Please Please let these ship by Christmas!
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Please Please let these ship by Christmas!
#200
Advanced
Can someone in the first batch who ordered pcd's please make a sound clip. Im not sure whether to order the pcd or hfpc and would love to hear just how loud it is and what the exhaust note sounds like with no cats. Thanks in advance