AzNGR81

i just got my EDFC, however i won't be able to use my stock strut bar because of it clamping on the EDFC wire

i've been looking for a strut bar but cant seem to really find one for the 04-06 TL besides Neuspeed which i dont really want

anybody got any suggestions?

ACCURATEin

03+ Honda Accord Greddy strut bar.

AzNGR81

nice, thats exactly what i was planning to order tomorrow

i wanted to get the cusco one but that was an ua5 not ua6

ACCURATEin

The only thing to note is you will only be able to utilize one stud on each tower, unless you get the accord top hats and drilled a hole in the proper location..at which point you will be able to use 2 studs per tower.

...i have been running one stud on each side and haven't had any problems with it.

and a cusco bar would have been optimal!...but hell the greddy will suffice.

Black_05_TL_6SP

I am in the process of getting one made for the TL's that will work with the EDFC motors. It is currently in the prototype stages. If you do a search for "TL strut bar", I have a thread with all the information. Jason

Kennedy

iTrader: (2)

Hmmm...
I didn't think the new "black box" was compatible with the motors the SS requires...
Can you order the control box seperately? I'd prefer the black one as well.

KB1Spec

iTrader: (4)

Why not saw off part of the stock struct bar. This is what I did on my.

ACCURATEin

^that's what mine looked like originally, before the discovery of the accord compatibility.

drdamian

^------ something just dosn't seem right to me about doing that. I have the same setup accuratein has. its east to use the accord top hats.. just need to drill 1 hole for each side..

keepin_it_clean

Greddy strut bar works like a charm!!! https://acurazine.com/forums/ramblings-12/starter-motorcylce-need-advice-142944/

Danny04TL

^^^ yep