Scottwax

Basically did the same thing although mine were first replaced at 120k, but same mileage for second set. They weren't loose but kind of surprised how little effort it took to break them loose.

TL-Syndicate23

iTrader: (2)

I just suffered the dreaded #5 plug issue and want to give the Time-Sert a shot. Anyone know what size kit I need to get? Any guidance would be appreciated!

NetGnome

Tips for time-sert
1. Ebay sells a Chinese endoscope web cam with leds that will fit down the spark plug hole. Great for finding chips that fall in and seeing the new spark plug seat is cut well.
2. Grease the tap
3. A small tube connected to a vacuum that you can put down the spark plug hole to vacuum up chips and a chop stick with grease on the tip to reach chips in the corners
4. Measure the distance from the spark plug hole to the top of the spark plug tube and mark that distance on the time sert tap so you don't tap too far down.
5. You can disconnect the fuel pump fuse so the engine won't start, then crank the engine with no spark plug in the repaired cylinder so chips can be blown out.

TL-Syndicate23

iTrader: (2)

I was able to rethread the hole and sucked out what I assume all of the shavings from doing the job. Wondering if an oil change is necessary? Any thoughts?

She's running as good as before the incident. Just scared of WOT driving and down shifting at the moment.

thoiboi

It's a very cheap insurance, why not

TL-Syndicate23

iTrader: (2)

I have to agree with ya! Gettin it done this weekend.