Rockstar143 is a hypocrite…KBP TL-S BS thread…
06-12-2016, 08:13 PM
#1441
I won't double post but
https://acurazine.com/forums/3g-tl-p.../#post15775886
ALso, this weekend, I swapped over to a jpipe Richie sent me to test.
Oddly, I still hear the hanger banging hanger sound, but it's MUCH muted over the original one I bought (that I'll be sending him to test out). I think there's inherently and issue with the outer flex vibrating against inner flex from exhaust pulses.
Either way, I appreciate the nice clean jpipe and will send him mine, shortly.
Looking like bank one was (is? did valve adjust) rich
here da J
Today, I fucked my fender...then I unfucked it...luckily I already had all the tools.
Also, tomorrow, I'll be doing some simple upgrading...
and my master cylinder starting doing it's thing and being noisy...I researched all my previous research and posts on the AZ...and found my original solution...high temp urea honda grease...ordered more just in case.
Also, an add a fuse to see if it'll clear the fuse door for the V1 and remote sub turn on.
https://acurazine.com/forums/3g-tl-p.../#post15775886
ALso, this weekend, I swapped over to a jpipe Richie sent me to test.
Oddly, I still hear the hanger banging hanger sound, but it's MUCH muted over the original one I bought (that I'll be sending him to test out). I think there's inherently and issue with the outer flex vibrating against inner flex from exhaust pulses.
Either way, I appreciate the nice clean jpipe and will send him mine, shortly.
Looking like bank one was (is? did valve adjust) rich
here da J
Today, I fucked my fender...then I unfucked it...luckily I already had all the tools.
Also, tomorrow, I'll be doing some simple upgrading...
and my master cylinder starting doing it's thing and being noisy...I researched all my previous research and posts on the AZ...and found my original solution...high temp urea honda grease...ordered more just in case.
Also, an add a fuse to see if it'll clear the fuse door for the V1 and remote sub turn on.
The following 6 users liked this post by rockstar143:
eyedrop (06-14-2016),
FamilyGuy (06-14-2016),
maharajamd (06-12-2016),
Marcelechka (06-13-2016),
skd2k1 (06-14-2016),
and 1 others liked this post.
06-12-2016, 08:41 PM
#1443
You seem to always find such nice locations. Looking fantastic as always 
Have you greased the MC on your old TL before? I sometimes get noises/creaking but have read that the grease is really only a temporary fix. I actually have a brand new MC but it looks to be a huge pain in the ass to install.
Have you greased the MC on your old TL before? I sometimes get noises/creaking but have read that the grease is really only a temporary fix. I actually have a brand new MC but it looks to be a huge pain in the ass to install.
The following users liked this post:
rockstar143 (06-12-2016)
06-12-2016, 08:49 PM
#1444
Thanks!
Yes sir, I researched the FUCK out of this.
I tried everything you can name...
finally, Honda High Temp Urea grease...in a plastic syringe shot into the master cylinder...silence for years. On the black car, it was still silent...on the bleu car...new master a few years ago and got noisy, was silent today.
It's the truth.
Yes sir, I researched the FUCK out of this.
I tried everything you can name...
finally, Honda High Temp Urea grease...in a plastic syringe shot into the master cylinder...silence for years. On the black car, it was still silent...on the bleu car...new master a few years ago and got noisy, was silent today.
It's the truth.
06-12-2016, 09:34 PM
#1445
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
The MC noise issue... is that a sort of squeaky, crunchy sound when you depress it?
The following users liked this post:
rockstar143 (06-13-2016)
The following users liked this post:
rockstar143 (06-13-2016)
06-13-2016, 10:09 AM
#1447
I did PCDs over the weekend and I hear that same "chatter" right around 3000RPM. Thought it was all in my head but seems like you hear it too?
Is there a fix or you just learn to live with it, also do you hear it outside the car?
PCDS, OEM jpipe and 3rd cat, +stage 2 is my current setup.
Is there a fix or you just learn to live with it, also do you hear it outside the car?
PCDS, OEM jpipe and 3rd cat, +stage 2 is my current setup.
06-13-2016, 10:31 AM
#1449
Damn man...really? I thought for sure it was coming from the jpipe...odd that you're hearing it too. When tightening down the v3 j, you need to have the cats loose until you put something to space the 2 sections of flex on the jpipe so they don't touch. On the oem pipe, that's not necessary...
Ryan...for sure, man...
I tried EVERYTHING...white lithium grease, wd40, molykote....
nothing lasted EXCEPT the Honda Urea grease...I did it, and it was still good 4 years later when I sold the car. I was at wit's end...and from what I gather, people that have changed the master, end up with the problem again.
Ryan...for sure, man...
I tried EVERYTHING...white lithium grease, wd40, molykote....
nothing lasted EXCEPT the Honda Urea grease...I did it, and it was still good 4 years later when I sold the car. I was at wit's end...and from what I gather, people that have changed the master, end up with the problem again.
06-13-2016, 11:13 AM
#1451
Tell me about it...
Dude, I removed the pedal, replaced the spring, lubed everything that moves...
in the end, it's the master cylinder. 4 fukin years later, she was still silent after that application.
The KEY is to have the pedal completely depressed though, so the urea can get all the way down the chamber.
Dude, I removed the pedal, replaced the spring, lubed everything that moves...
in the end, it's the master cylinder. 4 fukin years later, she was still silent after that application.
The KEY is to have the pedal completely depressed though, so the urea can get all the way down the chamber.
06-13-2016, 11:24 AM
#1452
Senior Moderator
Gorgeous pics of a gorgeous car, J. 
The following users liked this post:
rockstar143 (06-13-2016)
The following users liked this post:
rockstar143 (06-13-2016)
06-13-2016, 12:43 PM
#1454
I could easily hide her...lmao
I actually used two shots because in one she's not visible.
But thank you!
yeah, I take my camera everywhere! the car is half of it, but where the car is is a big part of what makes the pictures interesting to look at.
I actually used two shots because in one she's not visible.
But thank you!
yeah, I take my camera everywhere! the car is half of it, but where the car is is a big part of what makes the pictures interesting to look at.
06-13-2016, 12:43 PM
#1455
Senior Moderator
The following 2 users liked this post by thoiboi:
Oh Sickest TL (06-13-2016),
rockstar143 (06-13-2016)
The following users liked this post:
rockstar143 (06-13-2016)
The following users liked this post:
rockstar143 (06-13-2016)
06-13-2016, 01:01 PM
#1459
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
I kept trying to figure out a way to make a joke about the car being the same color as that wheelie bin in the background.
But recycling is cool and so is that car, so I just left things alone.
But recycling is cool and so is that car, so I just left things alone.
The following users liked this post:
rockstar143 (06-13-2016)
The following users liked this post:
Marcelechka (06-13-2016)
06-13-2016, 01:13 PM
#1461
Senior Moderator
06-13-2016, 10:30 PM
#1463
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Buddy, PhotoShoppe those cones out of the 2nd picture.....what a backdrop on all of those shots.
The following users liked this post:
rockstar143 (06-14-2016)
06-14-2016, 12:12 AM
#1464
The following 5 users liked this post by usdmJON:
cu2wagon (06-14-2016),
maharajamd (06-14-2016),
rockstar143 (06-14-2016),
rossv1 (06-15-2016),
Yumcha (06-14-2016)
06-14-2016, 06:36 AM
#1465
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Ooh, nice job!
Now Photoshop a Velociraptor hiding somewhere in the background!
Now Photoshop a Velociraptor hiding somewhere in the background!
The following 2 users liked this post by cu2wagon:
maharajamd (06-14-2016),
rockstar143 (06-14-2016)
06-14-2016, 08:41 AM
#1467
Three Wheelin'
Wow excellent shots J!
The following users liked this post:
rockstar143 (06-14-2016)
The following users liked this post:
rockstar143 (06-14-2016)
06-14-2016, 12:23 PM
#1469
Senior Moderator
The following 6 users liked this post by thoiboi:
cu2wagon (06-14-2016),
DarkTower19 (06-15-2016),
rockstar143 (06-14-2016),
rossv1 (06-15-2016),
TacoBello (06-14-2016),
and 1 others liked this post.
06-14-2016, 01:15 PM
#1470
Race Director
iTrader: (1)
The following users liked this post:
rockstar143 (06-14-2016)
06-14-2016, 03:53 PM
#1473
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
06-14-2016, 03:57 PM
#1475
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
06-14-2016, 03:58 PM
#1476
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Future Dinosawr!!! 
06-14-2016, 04:01 PM
#1477
Senior Moderator
TL S from the future.. I can dig it 
06-14-2016, 04:37 PM
#1479
Senior Moderator
