Indulge In An Evening With...
Thread Starter
Joined: Feb 2008
Posts: 4,096
Likes: 414
From: Scarborough, Ontario
Indulge In An Evening With...
Took these about three nights ago.
Three nights just before my buddy in the Civic got into an accident.
I have no strobes and such... That night I forgot my tripod as well =[
Anyhow...
INDULGE

An Evening With... Cae-----A Civic and A TL!

And then my battery died after 3 shots:

Windsor Ontario isn't the greatest for pictures... It's basically either roof tops, the casino or by the river [where there can be some amazing shots of Detroit!]
Such as these, from the Night Photography thread:


Three nights just before my buddy in the Civic got into an accident.
I have no strobes and such... That night I forgot my tripod as well =[
Anyhow...
INDULGE

An Evening With... Cae-----A Civic and A TL!

And then my battery died after 3 shots:

Windsor Ontario isn't the greatest for pictures... It's basically either roof tops, the casino or by the river [where there can be some amazing shots of Detroit!]
Such as these, from the Night Photography thread:


Thread Starter
Joined: Feb 2008
Posts: 4,096
Likes: 414
From: Scarborough, Ontario
I purchased mines on eBay.
Search for Titek 350z CF Air Duct. It looks the best
I believe that is the one that Stillhere, Accuratein and I think Acuraholic have.
I personally went with a different air duct. The Titek filter points up [towards the engine]. Mine points down, towards the air filter for the CAI.
It wasn't a pain at all to install, actually! Just measure [some might come with a template] and use a dremel to cut the bumper. Just be careful and always start with smaller cuts--then test fit--and slowly increase the size of the hole for the duct.
Use a rivets to hold it in place.
Thank you!
Hahah, thanks! It was a little tough holding the camera still in some instances considering I have shaky hands... I resorted to "resting" my elbows into my body/legs and even ended up using a CD case as a platform for the camera to shoot on angles!
Thanks a lot!
Search for Titek 350z CF Air Duct. It looks the best
I believe that is the one that Stillhere, Accuratein and I think Acuraholic have.
I personally went with a different air duct. The Titek filter points up [towards the engine]. Mine points down, towards the air filter for the CAI.
It wasn't a pain at all to install, actually! Just measure [some might come with a template] and use a dremel to cut the bumper. Just be careful and always start with smaller cuts--then test fit--and slowly increase the size of the hole for the duct.
Use a rivets to hold it in place.
Thank you!
Hahah, thanks! It was a little tough holding the camera still in some instances considering I have shaky hands... I resorted to "resting" my elbows into my body/legs and even ended up using a CD case as a platform for the camera to shoot on angles!
Thanks a lot!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Biggie_B
5G TLX (2015-2020)
13
May 27, 2025 05:51 PM
SidhuSaaB
3G TL Problems & Fixes
18
May 30, 2020 12:40 AM
mlody
5G TLX (2015-2020)
85
Dec 4, 2019 02:11 PM







