Had my quad tips welded on, check it out
#81
One on the right for me
There are a lot of shit SS tips out there.
#84
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
pretty sure its the same one they sale on eBay
http://www.afterthoughtsauto.com/dual-exhaust-tips.html
http://www.afterthoughtsauto.com/dual-exhaust-tips.html
#85
SSM FTW
iTrader: (1)
hey GVTL, can you post pictures from the side?
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
#88
TEAM_SONIC
iTrader: (3)
hey GVTL, can you post pictures from the side?
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
Thanks for the pictures, but I want to ask you a question. You said that the outer tip sticks outward more. Correct? Is there anyway, it can be pushed back? Thanks.
#91
TEAM_SONIC
iTrader: (3)
hey GVTL, can you post pictures from the side?
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
#96
Area on my XM
#97
OCD
iTrader: (3)
hey GVTL, can you post pictures from the side?
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
anyways my tips from afterthoughtsauto came in yesterday, didnt get the chance to get them welded yet but i did take some pictures.
heres the first set of pictures where the inside tip is flush with the exhaust shroud. it does not touch at all, but i think the outside tip is sticking out too far for my taste. besides, i have the aspec kit so i could move it back farther.
this is how i would run mine. sits about an 3/4 inch further back. would not work for non aspec guys unless they remove the exhaust shroud IMO. the 5th picture shows it touching. i measured it and its the same dimension as the one on ebay.
If those are the same tips he must have the whole assembly turned to the side a bit because they don't stick out like that at all. He posted this picture on the first page.
https://acurazine.com/forums/picture...ictureid=26754
#103
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
No sir, just cut the stock tip off and replaced it with this one. It was all right out of the box, so no modification needed. I just had them angle it slightly outward so it matched the bumper a little more
#104
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
pretty sure its the same one they sale on eBay
http://www.afterthoughtsauto.com/dual-exhaust-tips.html
http://www.afterthoughtsauto.com/dual-exhaust-tips.html
#110
Racer
Join Date: Feb 2010
Location: Brandon, fl
Age: 35
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
It does seem that his tips are further apart, but the difference, if any, would be very minute. I'm very happy with the set I got. Didn't run in to any problems and fits perfectly. They were actually dirty in the pics. Just need to run water on it and wipe it with a rag
#118
In Search Of Sunrise....
I would definitely change the angle on those tips man. they look too low and doesn't flow with the lines of the aspec bumper.
Its is just a matter of holding it in the position you like them and then having them tach weld it in place. Once your happy with it, they'll complete the weld all around.
it took me 3-4 times of adjusting before i was happy with how it looked.
Its is just a matter of holding it in the position you like them and then having them tach weld it in place. Once your happy with it, they'll complete the weld all around.
it took me 3-4 times of adjusting before i was happy with how it looked.
#119
Does anyone want to try an IS-F look?
#120
TEAM_SONIC
iTrader: (3)
I would definitely change the angle on those tips man. they look too low and doesn't flow with the lines of the aspec bumper.
Its is just a matter of holding it in the position you like them and then having them tach weld it in place. Once your happy with it, they'll complete the weld all around.
it took me 3-4 times of adjusting before i was happy with how it looked.
Its is just a matter of holding it in the position you like them and then having them tach weld it in place. Once your happy with it, they'll complete the weld all around.
it took me 3-4 times of adjusting before i was happy with how it looked.