Do NOT try this at home! Camber+moar LOW!
#1
Do NOT try this at home! Camber+moar LOW!
I know alot of you ppl will flame me, but I know a couple of ppl here that will enjoy this.
STATIC, btw!
http://s511.photobucket.com/albums/s...t=14e1346f.mp4
STATIC, btw!
http://s511.photobucket.com/albums/s...t=14e1346f.mp4
Trending Topics
#15
#22
Thanks for all the love guys! lol
I get a measuring tape and measure from the top where the coil is touching the actual car but where the tophat goes (but under it) all the way to the bottom locking ring. The more the inches the higher the car, the less the lower. LMK if you need any help..
I get a measuring tape and measure from the top where the coil is touching the actual car but where the tophat goes (but under it) all the way to the bottom locking ring. The more the inches the higher the car, the less the lower. LMK if you need any help..
#23
It looks good but I can't help but wonder, how would you enjoy the performance aspect of your car? I mean, can you turn your car going faster than 10 or 15mph? With this kind of setup, you can only cruise right? Not flaming, just curious.
#33
Boys and girls, the machine is drivable!
For the lovers:
http://s511.photobucket.com/albums/s...t=d7ed0e90.mp4
For the haters
http://s511.photobucket.com/albums/s...t=d7abb43e.mp4
For the lovers:
http://s511.photobucket.com/albums/s...t=d7ed0e90.mp4
For the haters
http://s511.photobucket.com/albums/s...t=d7abb43e.mp4
#37
I have to raise the front a little since i have no turning radius
#40