henrylo

I just got my fujita cold air intake installed on my 06' TL, i honestly don't hear a big difference when i drive, can it be that my car is automatic, the only way for me to hear the little blow off sound is when i step or even have to stomp on the pedal from 1000 rpm-4000pm, otherwise when i gas gradually, i don;t really hear it.

What about you guys, i would love to have your inputs and review about the fujita intake on a automatic TL

erick3

you don't hear a difference? hm...try holding it in second via triptronic and then gradually accelerating i hear it.

AckTL05

iTrader: (18)

more air the more you hit the gas. Floor it and you should defiantly hear a roar

ballerjai

I speak for aem, but there both cai's, should be nearly the same. I heard my cai b4 my ATLP quads we're installed. However, I hear a slight hissing sound around 2-5k.

auto_freak

when did you get it installed? give it a day or two to settle in...I know thats what happened when I installed my CAI. Few days later, it growls like a beast especially if you shift near redlines...Once the VTEC kicks in, the sound from the engine itself totally changes...The turbo-like noise can be heard mostly while flooring it or even when you start up or shut off the engine.

henrylo

how do u hit v-tec in a auto TL? by flooring it?

auto_freak

Once you go past 4000+ RPM, your VTEC should kick in....You will feel the power once it does.

BigJack75

It's really not much louder than stock while driving normally. It only makes a litte more sound when you punch it and hit around 4k. I like it and am glad it is not too loud and ricey!

NTP66

FWIW, I can hear the intake at pretty much any RPM. Obviously, it's not very loud at low RPM's, but the whistle is still noticeable. It definitely turns to a "growl" once you really get on the gas.

itsnickONG

iTrader: (1)

Hey would any1 know the part # to the vibration mount for the F5 CAI? I went on the site and saw 4 different types but not quite sure which 1 is the correct 1. Any help would be great. Thanks :-)

77donovan77

iTrader: (2)

What type of exhaust are you running.....?

AckTL05

iTrader: (18)

not to thread jack but I have a custom aem intake and low rpm's and driving it sounds like it rattles. Do they do that?

BuffBakerGA

iTrader: (2)

You'll only hear it at WOT...

BigJack75

Sounds like it may be loose or vibrating against something.

KaMLuNg

iTrader: (5)

if you are just gradually applying gas, you will hear nothing... but if you lay into the pedal about 75% WOT, you will hear a distinct hiss all the way from 1000 rpm... that is normal...

it won't roar until you get into VTEC...