213swampy

iTrader: (1)

has anybody put a pr2 spacer with a ct supercharger, between the elbow and the
intake manifold

I hate cars

Are you asking if it would fit or if it would give a performance gain?

It's going to be harder to fit everything and it gave no performance gains without the blower. It will give no gains with the blower.

Hi speed

iTrader: (3)

The blower comes with a spacer, just use that one.

213swampy

iTrader: (1)

im trying to use the p2r spacer beacause it has a thread hole, so i put the meth nozzle.

Hi speed

iTrader: (3)

You should be able to use the P2R spacer but the port is too late for meth injection. Spraying that close to the intake is going to cause uneven distribution of meth to the cylinders.

csmeance

I thought that's where most people were injecting it even with N/A applications. Just be careful with it before the intake elbow of the charger as it damages plastics ad can damage the components of the supercharger!

Excelerate

iTrader: (1)

I wouldn't use it with the blower. It will not help out in power since there is air being forced in and the air is heated up after the spacer. And it will make a difficult fit for the blower elbow.

213swampy

iTrader: (1)

would any have any idea where to put the nozzle for meth kit any pics would really
help. thanks!!!!!

bmeyer

iTrader: (3)

04accordcpe has the best setup I've seen so far. His meth nozzle is mounted in the exhaust manifold of the S/C. It's mounted on the very bottom, straight upward into the boosted side of the intake. IMHO, it's going to get the best atomization there. (Which leads to better distribution between the cylinders.) Search for his thread with pics in it.

213swampy

iTrader: (1)

ill try looking for it, where did you mount your nozzle with your meth kit,
and by the way hows the progress on the close loop tuning that you're working on.

213swampy

iTrader: (1)

heres where i mount my meth nozzle is it ok there.

213swampy

iTrader: (1)

i had a problem with the bottom bolt it wasnt long enough so i went and got
a longer one but the elbow was in the way, dose any body have an idea of how to
get a bolt in there