P2R Throttle Body Spacer and Thermal Gaskets by Excelerate!!!
11-12-2007, 10:40 AM
#201
Originally Posted by Excelerate
The difference in hp gains will be negligent. P2R actually uses a proprietary material to make their thermal gaskets that is more resistant to heat than the Outlaw product so it is a better material but I doubt the gains will be significant enough to switch from your Outlaw IMG.
11-12-2007, 01:46 PM
#203
Originally Posted by t0talacuratl
Damn! Sorry guys! I do have the Outlaw and thought it would be a difference. So please delete me from the list. I already pm Josh for a refund. Sorry for the inconvience.
11-12-2007, 09:30 PM
#205
Originally Posted by Excelerate
My post above referred to the Intake Manifold gasket not the Throttle body setup. There will be a noticeable difference between the P2R TB setup and the Outlaw throttle body setup. Outlaw uses a 5/8" phenolic style spacer while P2R uses 2 thermal gaskets that are more heat resistant and also a 3/4" aluminum spacer for more volume.
11-13-2007, 12:29 AM
#207
Instructor
Join Date: Aug 2007
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
US RESIDENT Group Buy
$110 Shipped
1. minkl81 (pmt sent)
2.kosstick
3.Terry919 (pmt sent)
4. laxplaya11385
5. INSANE TL
6.sandiegodrive (pmt sent)
7. kjelly (Ken) (pmt sent)
8. t0talacuratl (pmt sent)
9. bent09 (pmt sent)
10.jokerunm(pmt sent)
$110 Shipped
1. minkl81 (pmt sent)
2.kosstick
3.Terry919 (pmt sent)
4. laxplaya11385
5. INSANE TL
6.sandiegodrive (pmt sent)
7. kjelly (Ken) (pmt sent)
8. t0talacuratl (pmt sent)
9. bent09 (pmt sent)
10.jokerunm(pmt sent)
11-16-2007, 10:48 AM
#212
according to the tracking number they arrived in montreal on monday, I figured they would have been at more door yesterday but i'm still waiting. the tracking number is CV001292565US and you can check it on canadapost.ca. I'm hoping I get it sometime today but it's seeming less likely.
11-16-2007, 01:45 PM
#213
Back after 1 Year!
Join Date: Aug 2006
Location: Chula Vista, CA (San Diego County)
Age: 38
Posts: 1,047
Likes: 0
Received 33 Likes
on
4 Posts
DIY Video: Throttle Body Spacer Install
Hey Guys! The DIY Video: Throttle Body Spacer install is done! 
Check it out here to help you with your guys' install.
DIY Video: Throttle Body Spacer Install
Hope I made it easy to understand
Check it out here to help you with your guys' install.
DIY Video: Throttle Body Spacer Install
Hope I made it easy to understand
11-16-2007, 05:11 PM
#216
Man I wish I seen that video earlier. It was a pain to get those bolts out! Josh, the spacer is great! I notice the extra torque right away! Thanks again! Question though. I did put the spacer on upside down with the groove on the bottom. Does that matter? It seems to be working fine though.
11-19-2007, 12:25 PM
#218
South Orange County, CA
Join Date: Jun 2007
Location: Mission Viejo, CA
Age: 53
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sandiegodrive
Hey Guys! The DIY Video: Throttle Body Spacer install is done!
Check it out here to help you with your guys' install.
DIY Video: Throttle Body Spacer Install
Hope I made it easy to understand
Check it out here to help you with your guys' install.
DIY Video: Throttle Body Spacer Install
Hope I made it easy to understand
11-19-2007, 05:44 PM
#221
Originally Posted by sandiegodrive
Hey Guys! The DIY Video: Throttle Body Spacer install is done!
Check it out here to help you with your guys' install.
DIY Video: Throttle Body Spacer Install
Hope I made it easy to understand
Check it out here to help you with your guys' install.
DIY Video: Throttle Body Spacer Install
Hope I made it easy to understand
11-20-2007, 04:02 PM
#224
Instructor
Join Date: Nov 2004
Location: Calgary AB
Age: 46
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by The Dougler
Canucks, I still have not received the package. USPS says it should be delivered within 6-10 Business days, and tomorrow is the 10th so I have high hopes lol.
11-20-2007, 04:28 PM
#225
Originally Posted by Canadian Mike
Only took customs 7 days to confirm it was just chunks of metal!
11-20-2007, 06:40 PM
#226
Turd Polisher
iTrader: (1)
Payment sent, can't wait for my first engine mod 
.
CAI is next.
.CAI is next.
11-20-2007, 06:47 PM
#227
Back after 1 Year!
Join Date: Aug 2006
Location: Chula Vista, CA (San Diego County)
Age: 38
Posts: 1,047
Likes: 0
Received 33 Likes
on
4 Posts
Originally Posted by TylerT
Payment sent, can't wait for my first engine mod .
CAI is next.
.CAI is next.
11-20-2007, 07:22 PM
#228
Which way is up?!
Originally Posted by t0talacuratl
..... I did put the spacer on upside down with the groove on the bottom. Does that matter? It seems to be working fine though.
11-20-2007, 08:39 PM
#229
Back after 1 Year!
Join Date: Aug 2006
Location: Chula Vista, CA (San Diego County)
Age: 38
Posts: 1,047
Likes: 0
Received 33 Likes
on
4 Posts
Originally Posted by t0talacuratl
Man! I just made a crazy discovery! I mention that I put the spacer on upside down (groove side down) when I first put the spacer on. When I re-installed the spacer groove side up, the car responded poorly. Even the spacer was hot after driving. It was nothing like the first install. Today after work, I switched it back to groove side down again. It was amazing again! Also the spacer was just alittle warm after alot of spirited driving. I understand the stock gasket was groove side up before, but I think this is the better way to roll!
Thats a trip! Excelerate? Any clue why this is?
11-21-2007, 01:51 PM
#231
the package arrived today, and I've already dropped everyone's in the mail (Xpresspost). On the downside I got charged $76 in Duty on the package. It looks like excelerate missed the first letter of my postal code and customs opened the package to look for invoice with proper one. I think that's why it took so long the clear. Canucks check you PM, I've sent you tracking details.
11-22-2007, 10:36 AM
#233
Originally Posted by t0talacuratl
Man! I just made a crazy discovery! I mention that I put the spacer on upside down (groove side down) when I first put the spacer on. When I re-installed the spacer groove side up, the car responded poorly. Even the spacer was hot after driving. It was nothing like the first install. Today after work, I switched it back to groove side down again. It was amazing again! Also the spacer was just alittle warm after alot of spirited driving. I understand the stock gasket was groove side up before, but I think this is the better way to roll!
post some pics of your install
11-22-2007, 08:27 PM
#236
Racer
Join Date: Aug 2003
Location: Toronto, CAN
Age: 39
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
for ppl with AEM CAI and the spacer, how did you manage to put the intake WITH the AEM original mount?? there's no way i could mount the intake after the spacer is on....did u guys cut the intake?? and it also looked like the vacuum port is interfering with one of the black electrical box too....
any ideas?? ppl with AEM intake and spacer?
any ideas?? ppl with AEM intake and spacer?
11-23-2007, 01:13 AM
#237
Team Anthracite
The Dougler (nick)
no need for that... because...
I GOT MY PACKAGE ALREADY =) thnx for the effort
also wanna thnk excelerate..
but i had a small issue installing coz of my AEM CAI.. trying to figure things out.. thnx anyways..
no need for that... because...
I GOT MY PACKAGE ALREADY =) thnx for the effort
also wanna thnk excelerate..
but i had a small issue installing coz of my AEM CAI.. trying to figure things out.. thnx anyways..
11-23-2007, 01:52 AM
#238
Senior Moderator
for those of you with the P2R, have you noticed any difference with MPG? Since I drive about 100 Miles a day, I need to squeeze every last MPG out I can so i don't go broke on gas money... Also excelerate, I PM'ed you about the spacers for the MDX and didn't get a response back.
11-23-2007, 03:29 AM
#239
Team Anthracite
Originally Posted by ckya
for ppl with AEM CAI and the spacer, how did you manage to put the intake WITH the AEM original mount?? there's no way i could mount the intake after the spacer is on....did u guys cut the intake?? and it also looked like the vacuum port is interfering with one of the black electrical box too....
any ideas?? ppl with AEM intake and spacer?
any ideas?? ppl with AEM intake and spacer?
11-23-2007, 05:10 AM
#240
Back after 1 Year!
Join Date: Aug 2006
Location: Chula Vista, CA (San Diego County)
Age: 38
Posts: 1,047
Likes: 0
Received 33 Likes
on
4 Posts
Originally Posted by ckya
for ppl with AEM CAI and the spacer, how did you manage to put the intake WITH the AEM original mount?? there's no way i could mount the intake after the spacer is on....did u guys cut the intake?? and it also looked like the vacuum port is interfering with one of the black electrical box too....
any ideas?? ppl with AEM intake and spacer?
any ideas?? ppl with AEM intake and spacer?