Need some help on where to buy some items.
#1
Ryan's loving his ATLP TL
Thread Starter
Need some help on where to buy some items.
I would like to buy the XLR8 Jpipe, P2R Spacer, and RV6 Test pipe (resonated) for my 05 TL AT. Could someone please supply me with links to the best website(s) to purchase these from?
I already have an ATLP Base exhaust, so I wanted to buy these to complete my set-up. I was having a hard time choosing which websites to buy these items from, and I know my fellow Acuraziners know the best places!![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Appreciate any help! Thanks in advance!
I'd like to get these items asap if I could. :P
I already have an ATLP Base exhaust, so I wanted to buy these to complete my set-up. I was having a hard time choosing which websites to buy these items from, and I know my fellow Acuraziners know the best places!
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Appreciate any help! Thanks in advance!
I'd like to get these items asap if I could. :P
#2
Former Whyner
http://powerrevracing.com/
http://www.excelerateperformance.com/
http://www.r-.ecrater.com/
And if your looking for an MDX spacer LMK (65 shipped)
https://acurazine.com/forums/car-parts-sale-361/3g-parts-mdx-spacer-stock-gasket-oem-shift-knob-754035/
http://www.excelerateperformance.com/
http://www.r-.ecrater.com/
And if your looking for an MDX spacer LMK (65 shipped)
https://acurazine.com/forums/car-parts-sale-361/3g-parts-mdx-spacer-stock-gasket-oem-shift-knob-754035/
#3
Ryan's loving his ATLP TL
Thread Starter
http://powerrevracing.com/
http://www.excelerateperformance.com/
http://www.r-.ecrater.com/
And if your looking for an MDX spacer LMK (65 shipped)
https://acurazine.com/forums/showthread.php?t=754035
http://www.excelerateperformance.com/
http://www.r-.ecrater.com/
And if your looking for an MDX spacer LMK (65 shipped)
https://acurazine.com/forums/showthread.php?t=754035
PS: Also your second link you supplied me with doesn't work.
#4
Former Whyner
http://store.excelerateperformance.c...s/g-57719.aspx
http://store.excelerateperformance.c...e/b-10668.aspx
http://www.acuratlparts.com/
RV6-Performance.com
http://store.excelerateperformance.c...e/b-10668.aspx
http://www.acuratlparts.com/
RV6-Performance.com
Last edited by RonJonTL757; 12-13-2009 at 06:04 AM.
#5
Ryan's loving his ATLP TL
Thread Starter
#7
Ryan's loving his ATLP TL
Thread Starter
Where can I buy that? AcuraTLPart.com is sold out..
Is there another location?
www.Healtoeautomotive.com
I bought my ATLP Base exhaust there.
Is there another location?
www.Healtoeautomotive.com
I bought my ATLP Base exhaust there.
Trending Topics
#8
Chapter Leader (San Antonio)
iTrader: (3)
Where can I buy that? AcuraTLPart.com is sold out..
Is there another location?
www.Healtoeautomotive.com
I bought my ATLP Base exhaust there.
Is there another location?
www.Healtoeautomotive.com
I bought my ATLP Base exhaust there.
#9
Ryan's loving his ATLP TL
Thread Starter
#10
Chapter Leader (San Antonio)
iTrader: (3)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#11
Ryan's loving his ATLP TL
Thread Starter
I think I have changed my mind. What does everyone think of this setup?
ATLP Jpipe V2(IF available)>RV6 Test Pipe [Resognated]>ATLP Base exhaust.
Then I'll install the P2R Spacer onto the block between my AEM Cold Air Intake (V1).
I am going to assume when installing these, it shouldnt be that hard besides dealing with rusty bolts etc, which I will put some special stuff on to loosen them up the night before.
I have a pit in my garage so I can easily go under the car.
So i'll buy the ATLP Jpipe and the RV6 Resognated as well as the P2R spacer soon.
ATLP Jpipe V2(IF available)>RV6 Test Pipe [Resognated]>ATLP Base exhaust.
Then I'll install the P2R Spacer onto the block between my AEM Cold Air Intake (V1).
I am going to assume when installing these, it shouldnt be that hard besides dealing with rusty bolts etc, which I will put some special stuff on to loosen them up the night before.
I have a pit in my garage so I can easily go under the car.
So i'll buy the ATLP Jpipe and the RV6 Resognated as well as the P2R spacer soon.
#12
347hp/300tq @ 4psi
iTrader: (3)
I think I have changed my mind. What does everyone think of this setup?
ATLP Jpipe V2(IF available)>RV6 Test Pipe [Resognated]>ATLP Base exhaust.
Then I'll install the P2R Spacer onto the block between my AEM Cold Air Intake (V1).
I am going to assume when installing these, it shouldnt be that hard besides dealing with rusty bolts etc, which I will put some special stuff on to loosen them up the night before.
I have a pit in my garage so I can easily go under the car.
So i'll buy the ATLP Jpipe and the RV6 Resognated as well as the P2R spacer soon.
ATLP Jpipe V2(IF available)>RV6 Test Pipe [Resognated]>ATLP Base exhaust.
Then I'll install the P2R Spacer onto the block between my AEM Cold Air Intake (V1).
I am going to assume when installing these, it shouldnt be that hard besides dealing with rusty bolts etc, which I will put some special stuff on to loosen them up the night before.
I have a pit in my garage so I can easily go under the car.
So i'll buy the ATLP Jpipe and the RV6 Resognated as well as the P2R spacer soon.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
but if i were you, i would opt for the rv6 V2 PCD's, ATLP V2 jpipe, stock 3rd cat to keep the smell down. spending money on a HFC wont give you much more (1-2 whp tops) and ATLP base exhaust.
IMO, the PCD's are the best bang for the buck. dont overlook them (unless you already have them
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Last edited by 04accordcpe; 12-15-2009 at 03:50 AM.
#13
Ryan's loving his ATLP TL
Thread Starter
sounds like money to me ![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
but if i were you, i would opt for the rv6 V2 PCD's, ATLP V2 jpipe, stock 3rd cat to keep the smell down. spending money on a HFC wont give you much more (1-2 whp tops) and ATLP base exhaust.
IMO, the PCD's are the best bang for the buck. dont overlook them (unless you already have them
)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
but if i were you, i would opt for the rv6 V2 PCD's, ATLP V2 jpipe, stock 3rd cat to keep the smell down. spending money on a HFC wont give you much more (1-2 whp tops) and ATLP base exhaust.
IMO, the PCD's are the best bang for the buck. dont overlook them (unless you already have them
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Haha not to sound too noobish but could you explain what the RV6 V2 PCD's are? And what does HFC stand for again?
Link me if you could, I'll take a look at it.
I am not TOO worried about the smell around my area since I sort of live in the boondocks... :P
Plus around here they dont even start up your car when you get it inspected. LOL it's to that extent. Haha.
Cops around here are extremely leinient as well.
Seeing another TL, or an NSX for that matter is exciting because you dont see other Acuras much. :P Nothing but RSX base around here oh and can't forget civics.
In this area VW is the majority.
#14
Former Whiner
RV6 is the company. Version 2 PreCatDeletes.
They remove our two primary cats.
HFC=High flow cat.
Your inspection sounds cool, but just keep in mind the PCD will not pass the smog test.
They remove our two primary cats.
HFC=High flow cat.
Your inspection sounds cool, but just keep in mind the PCD will not pass the smog test.
#15
Ryan's loving his ATLP TL
Thread Starter
Oh Pre cat deletes, I don't have any plans at the moment to install those. Haha I was wondering why PCD sounded familiar..
I just didn't know the abbreviated words like HFC. lol
Thanks for clarifying that for me. Appreciate it!
#18
Ryan's loving his ATLP TL
Thread Starter
![Talking](https://acurazine.com/forums/images/icons/icon10.gif)
Hahahaha. Amen. No I'll admit it, I very much am. But hey its cool, new stuff to learn. So then I'll always know it for the future.
I'll post picture up maybe later on of the setup from under the car. I should get it by next week!
ONE last question, Haha. The P2R Spacer allows more airflow to the block correct from the intake? It allows pretty much to suck in more air?
Haha I got the MOD bug pretty bad this year. :P I never thought i'd go beyond catback honestly. But something about the ATLP brand that gets me every time.![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
I did go with the ATLP Jpipe. I just want a resonated pipe, thats why I am going with the RV6 Test pipe. Can't wait!
I'll post picture up maybe later on of the setup from under the car. I should get it by next week!
ONE last question, Haha. The P2R Spacer allows more airflow to the block correct from the intake? It allows pretty much to suck in more air?
Haha I got the MOD bug pretty bad this year. :P I never thought i'd go beyond catback honestly. But something about the ATLP brand that gets me every time.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
I did go with the ATLP Jpipe. I just want a resonated pipe, thats why I am going with the RV6 Test pipe. Can't wait!
#19
Former Whiner
Nice mang,
There is no cure for the MOD bug. You are now forever infected. It's like crack... you did it once... "oh i'm just going to do the catback exhaust, that's all."![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Not sure but P2R Spacer just sounds like a waste of money to me. Like extra bling bling for your engine bay. Majority of people say it adds no performance gains. And i've read somewhere... that it should add 5hp. I doubt it tho. Someone please correct my arrogance if needed.
There is no cure for the MOD bug. You are now forever infected. It's like crack... you did it once... "oh i'm just going to do the catback exhaust, that's all."
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Not sure but P2R Spacer just sounds like a waste of money to me. Like extra bling bling for your engine bay. Majority of people say it adds no performance gains. And i've read somewhere... that it should add 5hp. I doubt it tho. Someone please correct my arrogance if needed.
#20
Chapter Leader (San Antonio)
iTrader: (3)
Nice mang,
There is no cure for the MOD bug. You are now forever infected. It's like crack... you did it once... "oh i'm just going to do the catback exhaust, that's all."![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Not sure but P2R Spacer just sounds like a waste of money to me. Like extra bling bling for your engine bay. Majority of people say it adds no performance gains. And i've read somewhere... that it should add 5hp. I doubt it tho. Someone please correct my arrogance if needed.
There is no cure for the MOD bug. You are now forever infected. It's like crack... you did it once... "oh i'm just going to do the catback exhaust, that's all."
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Not sure but P2R Spacer just sounds like a waste of money to me. Like extra bling bling for your engine bay. Majority of people say it adds no performance gains. And i've read somewhere... that it should add 5hp. I doubt it tho. Someone please correct my arrogance if needed.
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#21
Ryan's loving his ATLP TL
Thread Starter
ONE last question in this dying post. Haha.
http://store.excelerateperformance.c...s/g-55685.aspx
Does this come with two gaskets for the P2R Spacer? Or just one?
I am assuming two because of the wording "gasket(s)". But I'm just making sure. I don't want to do all this work without all the supplies.
http://store.excelerateperformance.c...s/g-55685.aspx
Does this come with two gaskets for the P2R Spacer? Or just one?
I am assuming two because of the wording "gasket(s)". But I'm just making sure. I don't want to do all this work without all the supplies.
Last edited by RJNN TL; 12-16-2009 at 06:10 PM. Reason: General Edit.
#22
Ryan's loving his ATLP TL
Thread Starter
Oh and if someone could. What's with this MDX spacer mod i've been hearing about? What's the difference between the usual P2R mod and the MDX version. Is there additional work, or is it a direct replacement.
#23
Ryan's loving his ATLP TL
Thread Starter
Does anyone know? I'd like to have all the parts around the same time. The reason i'd get it separate from the AcuraZine package is because it doesn't make it clear if I can choose the blue spacer. I'd much prefer the blue, but it's making it seem like only silver when you buy it in the package. Can someone clarify all this?
#24
Ryan's loving his ATLP TL
Thread Starter
It was clarified by Josh that I can choose a different color later in the checkout. Thanks for all that helped me in this thread. I've ordered all the parts.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Last edited by RJNN TL; 12-17-2009 at 12:05 PM. Reason: Error.
#25
Ryan's loving his ATLP TL
Thread Starter
Though I am interested. How much should I essentially be putting down above stock? I have the following:
2005 TL 5AT,
AEM CAI>P2R Spacer>ATLP Jpipe>RV6 Test Pipe>ATLP Base Exhaust.
2005 TL 5AT,
AEM CAI>P2R Spacer>ATLP Jpipe>RV6 Test Pipe>ATLP Base Exhaust.
#26
Former Whyner
#28
Ryan's loving his ATLP TL
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
11-16-2015 08:30 PM
ExcelerateRep
4G TL Performance Parts & Modifications
8
10-14-2015 08:20 AM
navtool.com
1G RDX Audio, Bluetooth, Electronics & Navigation
1
09-25-2015 05:15 PM
kixo
2G TSX (2009-2014)
43
09-25-2015 03:07 PM