My Magnaflow Quad Exhaust
#86
Burning Brakes
Just got my exhaust done, sounds so perfect zero rasp with tge 22" Rez. Super deep not to loud and sounds good at any rpm. Little to no drone on the highway. Tips look great too.
#90
Intermediate
rasp
Hey man, I'm thinking about building the same exhaust set up. I noticed that you have a j-pipe and PCD's... did this set up eliminate all the rasp from the exhaust?
#103
04Tl
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Yonkers, New York
Age: 33
Posts: 732
Likes: 0
Received 5 Likes
on
5 Posts
yea its up to you, to where u wanna position Ur tips when u weld them, i went for the poke look cause i didn't want it to look like the stock type s quads. but just make sure u have the a-spec lip on when u weld it or ur gonna get ur tips to far in or out.
#105
Burning Brakes
I forgot to post my videos but anyways here they are.
http://www.youtube.com/watch?v=9MTbN...e_gdata_player
http://www.youtube.com/watch?v=WVFoE...e_gdata_player
I ended up taking the resonator off and replaced it with 3" from jpipe to Y.
http://www.youtube.com/watch?v=9MTbN...e_gdata_player
http://www.youtube.com/watch?v=WVFoE...e_gdata_player
I ended up taking the resonator off and replaced it with 3" from jpipe to Y.
#106
Burning Brakes
I had a 24" or 22" (can't remember which) resonator and I still had rasp so I said f it and took it off. Might be installing another muffler in the future to cut back drone.
#110
Burning Brakes
#115
Instructor
iTrader: (1)
I will do a similar set up more than likely but with the center off-set muffler magnaflow # 14362. I want to do the 2.5in piping from the cat to the y with a mid muffler delete. My quesiton is this ( im not very good with exhaust set ups) on my res. i want an 18 but do i need to have the 2.0 inch or 2.25 holes or can i do the 2.5 inch? part numbers 10424, 10425,10426
#117
04Tl
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Yonkers, New York
Age: 33
Posts: 732
Likes: 0
Received 5 Likes
on
5 Posts
No im full exhaust including pre-cats but ya the drone is present between 2.0 to 3.0 k, if ur concerned about drone i would go with the biggest resonator u can get
#118
04Tl
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Yonkers, New York
Age: 33
Posts: 732
Likes: 0
Received 5 Likes
on
5 Posts
I will do a similar set up more than likely but with the center off-set muffler magnaflow # 14362. I want to do the 2.5in piping from the cat to the y with a mid muffler delete. My quesiton is this ( im not very good with exhaust set ups) on my res. i want an 18 but do i need to have the 2.0 inch or 2.25 holes or can i do the 2.5 inch? part numbers 10424, 10425,10426
#119
tips stick out too far. i like the quad tips better on the cheap $67 mod thread.
https://acurazine.com/forums/3g-tl-photograph-gallery-96/greatest-%2467-mod-779675/
https://acurazine.com/forums/3g-tl-photograph-gallery-96/greatest-%2467-mod-779675/