Hello everyone, I was wondering if anyone would be interested in testing a j pipe I am making for the Accord. I just found out that the 4th gen TL's shares the same header design as the TL. I already have an Accord lined up for dyno but no TL yet. Send me a PM and let me know what you think.

This is picture of the version with 2.0" runner. One with larger runners is in the works.

 

Where in chicago? I am from Northwest Indiana :o

 

in the suburbs Carol Stream

 

where did you get the 4th gen info from?

 

If you have something for the 2004 then i will consider it...i am in the suburbs as well, a little far from carol stream, but not too far, around 45 minutes

 

Alright people from Illinois check out if this thing is legit, because I want to be the first to buy it!

 

If we do come in for the testing, would you give one free to the tester?

 

thats the deals if you pay for the dyno runs.

today i had a test fit on a accord it went well, but we are waiting on a version with larger pipe.

 

I like the welds! =)

 

thats hot!

i'm dying to see good NA gains for this! Richiev6, aznbo, somebody, please dyno!

 

Damn nice looking welds and fit from what I can tell. Bravo!

Please post up the results asap!

 

let us konw what power it makes! are you goin to be selling these? how much?

 

Where in Northwest Indiana are you from? I am from Schererville.

 

This was just a one of the prototypes, with 2.0" runners. We made a one with 2.36" runners but it did not fit. There is a another prototype comming with 2.25" runners, I have a feeling this will be the winner. The 2.0" j pipe is on a test car right now and he reports a stronger midrange. As on price it depends on how many sell so far there are 3 people on the accord list.

 

well what are the accord guys buying it for?

 

I'm from Carol Stream, PM me if you're still interested.

 

there arent any prototypes to test right now. i left the 2.0" with the accord there should be more soon, in about 2 weeks.

 

Sounds good, keep me posted if you still need help.

 

Interested.

 

Soon, i just got an update the tooling used to make these is done! Ill get an TL tester when the sample gets here.

 

Oh yea. Just curious I know a lot people have had custom j pipe made, how much power should I expect to see?

 

I'm not sure how many have actually installed J-pipes...not many if I remember correctly.
Any update on yours and when you need my car?

 

richie, i just dyno'd my car today on a dynojet with the stock jpipe. if you have one with the 2.0 piping, i can buy, install and compare for us SC'd guys... i loved the custom one i have now, but i am slammed about 4 inches and it got scaped a little bit. its still good, but i wanted to take it off and sell it to someone not as low, before it got really damaged. the one you have showing looks like its tucked under like the stock unit, so it will be perfect.

i can feel a BIG difference without it and i want another one ASAP. i promise to get it dyno'd right away at the same place, to compare results. im sure alot of the boosted guys are wondering how much power they can achieve with this mod too. LMK

 

i am still waiting for the shop to get back to me, i will call them tomorrow and see what the hold up is. the 2.0" is still with the tester, the new 2.25" pipe should be here soon.

So tell me about your engine swap? TL engine in a Accord?

 

^^yep, whole drivetrain swap. j32a3 heres the dyno run


http://www.youtube.com/watch?v=fbRD717zjiY

 

sexy! Just wondering how badly you need this j pipe, am only getting one prototype. I have promised this to the accord tester, I could try to arrange for a second one or you could just wait 3 weeks for the production run.

 

Any updates yet richie?

 

how did i miss this ^^ ?? =( richie, can you still arrange for a second one? or is it too late?? oh well =/ guess ill have to wait. i want another one so badddd!

 

sorry dude, i got the prototype yesterday and dynoed it today. i could sell you the old one, but im not sure if you want it. the new one will be much better.

 

Just got done with the dyno runs on the accord, the result were pretty good, everyone at the shop was impressed with the gains. Since we didn't loose any low end TQ I have a feeling that with the resonator test pipe the gains would be even better.

Dyno 1:
AEM CAI (v.1)
Apexi WS2 Catback
Stock J-Pipe

Dyno 2:
AEM CAI (v.1)
Apexi WS2 Catback
2.25in J-pipe



Zoomed in a little


My scanner sucks ill work on getting a better scan. Basically increases in TQ and HP through out the entire power band. I can't wait for dyno with resonator.

TQ
Stock: 201
Jpipe: 208
Gain: 7 Ft-lb

HP:
Stock: 219
Jpipe: 224
Gain: 5 WHP
Richie V6 is online now Report Post Edit/Delete Message
Pricing will come soon.

 

so how much?

 

ill get all the figured out for monday.

 

Does that mean you don't need a TL test car anymore?

 

Perhaps after the production run, right now theres no way to get more prototypes.

 

Naperville TL-S here. Is tester already taken?

 

stay tuned for more

 

I am waiting for vendor status once i have that ill start the jpipe group buy.

 

what happened to the other tread with the list of people wanting to buy it??? was it deleted?

 

yup i wasnt suppose to post a price. we hit the mark tho we they will start making them after the holidays.

Accord
1. 04accordcpe (no test pipe) (i want the bung with it, but not welded in )
2. nighthawk04v6 (w/ test pipe)
3. v6 6speed
4. BoxKing (w/ test pipe for now)
5. Pochacc_Will (no test pipe)
6. civic si hb (w/ test pipe)
7. nicepeta (w/ testpipe & bung)
8. andrewlongcor (w/ test pipe maybe)
9. okgnism (w/test pipe)
10. ddub1186 (w/ test pipe & bung)

TL
1. special-ed
2. JamminTL
3. Solless
4. type-s09 (no test pipe)
5. stylezz101
6. ohsixtl (no test pipe)

 

I'm interested... what's a test pipe?

RAR

Accord
1. 04accordcpe (no test pipe) (i want the bung with it, but not welded in )
2. nighthawk04v6 (w/ test pipe)
3. v6 6speed
4. BoxKing (w/ test pipe for now)
5. Pochacc_Will (no test pipe)
6. civic si hb (w/ test pipe)
7. nicepeta (w/ testpipe & bung)
8. andrewlongcor (w/ test pipe maybe)
9. okgnism (w/test pipe)
10. ddub1186 (w/ test pipe & bung)

TL
1. special-ed
2. JamminTL
3. Solless
4. type-s09 (no test pipe)
5. stylezz101
6. ohsixtl (no test pipe)
7. RAR (no test pipe)