hey guys im wiring up halos, it a 12 V system so i need to no which wire is the power lead on the front driver and passenger side parking light . Driver side wiring harness has 3 wires:black/silver, brown/silver and red with blue line/silver. Passenger side has black,white/silver and brown/silver. I just need to no which of these wires is the power lead not the turn signal.

 

^^ You got the lights already ??

 

BTW, AFAIR the black is ground and which ever wire is in the middle is the one for turn signal +ve, so that means the one towards the outside would be for the parking +ve, I could be wrong though so make sure before installing them.

 

lol yeah i got em.....BAD to the ASS!!!!!

Thats what I figured but I didnt wanna tap into the wrong one and my volt meter is mysteriously missing!!.

 

ANYBODY???? I need to know if what JnC said is correct or not!!

 

Hmmm.... On the 04, it shows red/black for parking lights and red/blu for left turn signals (front and rear), white for right turn signals (front and rear).

 

Yes, JNC is correct (at least for an 04/05, based on the Electrical Troubleshooting Manual). Pin 3 is ground/black. Pin 2 (middle) is turn signal, Pin 1 is + illumination.

 

Yah I got it all wired up! Everything is in and I'll post pix tomm if I can!! Thanls !!