I-058: playa4real's Peripheral PXAMG Install for a 3G Type S
03-16-2009, 04:10 PM
#121
abacon
Join Date: Dec 2007
Age: 36
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Guys and Gals,
It's official, The PGHHD2 harness is comming to market. This harness is only for vehicle equipped with NAV Traffic! This harness should hit our doors in mid June and be available no later the July 1.
The ipod cable is still a toss up, not sure if we will have them by then but you can always buy two and make one long one.
Enjoy
TT.
It's official, The PGHHD2 harness is comming to market. This harness is only for vehicle equipped with NAV Traffic! This harness should hit our doors in mid June and be available no later the July 1.
The ipod cable is still a toss up, not sure if we will have them by then but you can always buy two and make one long one.
Enjoy
TT.
Question for Peripheral though. For the ipod cable, can you use the cable for the older ipods and a 5 volt cable together? I assume the wiring inside the actual ipod connector is what changes the voltage but the actual wire that runs between the PXAMG unit and the ipod isn't any different. The ends that go to the PXAMG unit are identical. So you should be able to use the older cable to extend the 5 volt cable as long as all the wires are matched up correctly. Is this correct?
Last edited by abacon09; 03-16-2009 at 04:13 PM.
03-17-2009, 09:58 AM
#122
PXAMG GuRu
Join Date: Apr 2008
Location: Tampa Bay, FL.
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Awsome! I am buying one as soon as they come out. Great news.
Question for Peripheral though. For the ipod cable, can you use the cable for the older ipods and a 5 volt cable together? I assume the wiring inside the actual ipod connector is what changes the voltage but the actual wire that runs between the PXAMG unit and the ipod isn't any different. The ends that go to the PXAMG unit are identical. So you should be able to use the older cable to extend the 5 volt cable as long as all the wires are matched up correctly. Is this correct?
Question for Peripheral though. For the ipod cable, can you use the cable for the older ipods and a 5 volt cable together? I assume the wiring inside the actual ipod connector is what changes the voltage but the actual wire that runs between the PXAMG unit and the ipod isn't any different. The ends that go to the PXAMG unit are identical. So you should be able to use the older cable to extend the 5 volt cable as long as all the wires are matched up correctly. Is this correct?
03-19-2009, 07:06 PM
#123
good work sal's type s
redfred - your picture is ridiculous!
looks like you guys won't need to reverse engineer now that peripheral is going to market 200 of the harnesses! thanks tony
redfred - your picture is ridiculous!
looks like you guys won't need to reverse engineer now that peripheral is going to market 200 of the harnesses! thanks tony
03-19-2009, 07:53 PM
#124
03-19-2009, 10:04 PM
#128
03-19-2009, 10:06 PM
#129
03-19-2009, 10:10 PM
#130
03-20-2009, 06:34 AM
#131
Advanced
iTrader: (1)
Join Date: Jan 2009
Location: Boca Raton
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Guys and Gals,
It's official, The PGHHD2 harness is comming to market. This harness is only for vehicle equipped with NAV Traffic! This harness should hit our doors in mid June and be available no later the July 1.
The ipod cable is still a toss up, not sure if we will have them by then but you can always buy two and make one long one.
Enjoy
TT.
It's official, The PGHHD2 harness is comming to market. This harness is only for vehicle equipped with NAV Traffic! This harness should hit our doors in mid June and be available no later the July 1.
The ipod cable is still a toss up, not sure if we will have them by then but you can always buy two and make one long one.
Enjoy
TT.
03-20-2009, 02:23 PM
#132
Whats going Peripheral I already have mine working by just sticking the wires directly into the XM unit and the wiring harness. But i would like to get a harness just to be on the safe side. Is there going to be a list of some sort, if there is would like to get 2 or three of them...
04-30-2009, 05:26 PM
#135
PXAMG GuRu
Join Date: Apr 2008
Location: Tampa Bay, FL.
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
THEY ARE HERE. So now they have to be packaged, labels made and they whole shenanigans that go along with it. We are hoping to have them available in a few weeks. We may wait for the 20 ft iPod cables to come in though. I'm not sure.
We may wait for the 20 ft iPod cables to come in though. I'm not sure.
04-30-2009, 05:42 PM
#137
That's great Peripheral!!! Thanks for all your hard work.
I hope that you will make them available ASAP and not wait for the ipod cable to come in. I'm happy to mount it in the trunk ... out of the way. Some people may not require to plug in their ipod from the center dash.
Thanks again. My email address is: zeppelin1977@yahoo.com and I will definitely buy the harness.
I hope that you will make them available ASAP and not wait for the ipod cable to come in. I'm happy to mount it in the trunk ... out of the way. Some people may not require to plug in their ipod from the center dash.
Thanks again. My email address is: zeppelin1977@yahoo.com and I will definitely buy the harness.
04-30-2009, 08:04 PM
#139
and please don't wait for the 20 ft cables.p.s i don't need a label or a pack just the harness like fast.haha
Last edited by acura911; 04-30-2009 at 08:07 PM.
05-01-2009, 08:48 AM
#140
Trying to clean out
Join Date: Apr 2009
Location: Atlanta
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Should I just buy the main PXAMG unit from Amazon or some other place? How does one get on the harness list? If it's as easy as saying please add me... PLEASE ADD ME! Thanks!
05-01-2009, 12:12 PM
#143
Trying to clean out
Join Date: Apr 2009
Location: Atlanta
Age: 41
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
05-03-2009, 01:38 PM
#144
hey guys Travis has add the PGHHD2 harness for the tl type s to the groupbuy.it's still a pre-order he still does not have them yet but he may have them in a week or two.now lets send him our money and get our orders in.
you have to order it from his web
you have to order it from his web
Last edited by acura911; 05-03-2009 at 01:43 PM.
05-04-2009, 12:43 AM
#145
Addicted to boobs
Join Date: May 2007
Location: tennessee
Age: 44
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
whats his web addy?
05-04-2009, 02:21 AM
#146
you can now use the link on the group buy page or go to his web site at http://www.gigharborautoworks.com/
05-05-2009, 01:26 PM
#147
10th Gear
What to do
I've been monitoring this for a long time hoping we can get the harness for the XM with Navtraffic. Since its finally happening I wanted to know if I needed to buy the unit first and then order the harness separately? Or can I get it all together?
05-05-2009, 01:40 PM
#148
10th Gear
Nevermind, went to uncalds site and saw I could get it all there.
Car's looking real good Trew!!!
05-05-2009, 06:30 PM
#154
Admiral Crunch
Join Date: Sep 2007
Location: Wantagh, NY
Age: 38
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
05-07-2009, 04:15 PM
#157
Advanced
iTrader: (1)
Join Date: Jan 2009
Location: Boca Raton
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
So now that the unit for the TL-S is available: is it the same installation as the previous/original post? i.e. the unit goes in the trunk area and the ipod cable has to be run up to the center console?
If so - anyone with good pics on how to run the ipod cable from the trunk to the center console??
If so - anyone with good pics on how to run the ipod cable from the trunk to the center console??
05-08-2009, 12:16 AM
#159
2 ways..
1. along the door trim and then under the front passenger seat into the center console
or the way i did it..
2. under the rear seat and then under the carpet where the hump in the floor is into the center console. just use a metal hanger to pull through
1. along the door trim and then under the front passenger seat into the center console
or the way i did it..
2. under the rear seat and then under the carpet where the hump in the floor is into the center console. just use a metal hanger to pull through
