can anyone assist me with an issue im havin with my navi. everytime i press the Voice Command Button, my navigation goes wild. the screen flickers and acts up. i had to enter my navi code several times. the navi. works fine but the guidance voice is staticey but once i touch the VCB, it goes wild. what is wrong with it??

 

My car is having the same problem now, it has to load up and then I got to enter my code everytime I start the car and wait a few minutes on this grey screen with red writing for the map to load and there is static everytime there the navi guidance is talking

 

yea i havent yet found a fix. if you do keep me posted. this is getting irritating and im about to get an after market navi unit and install it in place of the factory one.

 

I cleaned my disk and for the first time it did not have to load, but the horrible loud static is still there when the navi voice guidance starts speaking

 

Never mind, it started doing the same thing again, man ever since they started making honda's and acura's in the US they have been tons of problems, there will never be a honda like the B series era

 

And compared to our cars, the B/D era Hondas were about 2 steps above a horse and buggy. My 91 CRX (D-16) has 2 computers, if you count the radio. Two. The TL probably has 50. A recent article in a tech mag said that the average new car has more lines of code than the F22 Raptor fighter plane, and the TL doesn't even come with missiles. With all that electronic wizardry (and you wanted it all, or you'd have gotten something less complicated) there's bound to be stuff that goes haywire. It's the price you pay for wanting more than basic transportation.

Really, we're approaching an era in cars where leasing is going to start making more sense than buying. Lease the thing, drive it until the bumper to bumper warranty is 10k miles from expiring, and unload it before some blinking electronic widget under the floor can stop blinking and cost you 5 grand.

 

Interesting. I've never heard of this problem. Have you tried to take out the radio to see if any wires are loose in back?