Supercomputer Lighted Door Sills; FEW SETS LEFT+Donation to Holiday Charity Drive
06-11-2011, 10:34 AM
#763
Check the forums guys there are tons of pics of my pedals. A fellow vendor knoced off the design that we created made them with some cheaper grade materials so they were cheaper but has since disappeared.
We used to sell them at 149.99 a set delviered. However if you bought the door sills.
They will be for sale for 99.99 Delivered to your door. Were taking orders now and we plan to ship in the next 2 weeks.
04-08 TL Auto and MT with Acura and Logos on Pedals Engraved and painted. All sets come with a Brake, Clutch, Dead Pedal and Gas depending on your transmission.
Paypal ID is allarndproducts@yahoo.com
I know a lot of guys have been asking and we leaked it to a few, Again there will be only 100 sets so once they are gone this is it on these also.
Thanks
D
We used to sell them at 149.99 a set delviered. However if you bought the door sills.
They will be for sale for 99.99 Delivered to your door. Were taking orders now and we plan to ship in the next 2 weeks.
04-08 TL Auto and MT with Acura and Logos on Pedals Engraved and painted. All sets come with a Brake, Clutch, Dead Pedal and Gas depending on your transmission.
Paypal ID is allarndproducts@yahoo.com
I know a lot of guys have been asking and we leaked it to a few, Again there will be only 100 sets so once they are gone this is it on these also.
Thanks
D
06-11-2011, 09:36 PM
#771
Racer
heres a DIY i SEARCHED in less then 1 min... was a crazy experience lol.
https://acurazine.com/forums/showthr...omputer+Pedals
pics are there to
https://acurazine.com/forums/showthr...omputer+Pedals
pics are there to
06-12-2011, 04:33 PM
#772
Guys real simple only full sets. You tell me AT or MT
My pedals are higher grade material then you have seen others try to copy.
99.99 Delviered Paypal ID Allarndproducts@yahoo.com Only 100 sets for sale.
Taking payments now will ship in 2-3 weeks.
Thanks
D
My pedals are higher grade material then you have seen others try to copy.
99.99 Delviered Paypal ID Allarndproducts@yahoo.com Only 100 sets for sale.
Taking payments now will ship in 2-3 weeks.
Thanks
D
The following users liked this post:
lucnex (06-13-2011)
06-13-2011, 09:24 PM
#776
Instructor
Okay I just got my sills today, but as I started to work on mine, I noticed they over lap like this and leave no "black spacing" is this how they are for the 08's?
Not sure I like that... I didnt notice this until I got them to day then started poking through the thread and saw this post by vietxquangstah.
If this is the case, does anyone know if the 04-06 sills will fit the 08?
06-13-2011, 09:44 PM
#777
University of Tennessee
Okay I just got my sills today, but as I started to work on mine, I noticed they over lap like this and leave no "black spacing" is this how they are for the 08's?
Not sure I like that... I didnt notice this until I got them to day then started poking through the thread and saw this post by vietxquangstah.
If this is the case, does anyone know if the 04-06 sills will fit the 08?
Not sure I like that... I didnt notice this until I got them to day then started poking through the thread and saw this post by vietxquangstah.
If this is the case, does anyone know if the 04-06 sills will fit the 08?
06-13-2011, 09:55 PM
#778
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
my pic contribution:
06-13-2011, 10:05 PM
#779
Instructor
Dang, I hope they last... I can already seeing my little girl denting em lol they are large, wonder if I can get my C&C guy to cut em to fit...
06-13-2011, 11:50 PM
#780
hey swoosh i got a question regarding the blue footwell lighting you have. do you have it installed to where it turns on when the doors open up? or do you have it wired to a button or switch that enables them to turn on / off?
also where did you purchase the leds ? i'm assuming its the led strips but please verify
also where did you purchase the leds ? i'm assuming its the led strips but please verify
06-13-2011, 11:52 PM
#781
you know, i thought the same thing about the sills when i ordered them and i didn't realize it until the day of the install when i actually tried to test fit it to see how it looks.
that's when i realized they actually do overlay over the entire oem sill. i came to like the new look. i think if the black on the edges were to still show, it would look cheap and plastic-y.
that's when i realized they actually do overlay over the entire oem sill. i came to like the new look. i think if the black on the edges were to still show, it would look cheap and plastic-y.
Okay I just got my sills today, but as I started to work on mine, I noticed they over lap like this and leave no "black spacing" is this how they are for the 08's?
Not sure I like that... I didnt notice this until I got them to day then started poking through the thread and saw this post by vietxquangstah.
If this is the case, does anyone know if the 04-06 sills will fit the 08?
Not sure I like that... I didnt notice this until I got them to day then started poking through the thread and saw this post by vietxquangstah.
If this is the case, does anyone know if the 04-06 sills will fit the 08?
06-14-2011, 12:47 AM
#782
Instructor
you know, i thought the same thing about the sills when i ordered them and i didn't realize it until the day of the install when i actually tried to test fit it to see how it looks.
that's when i realized they actually do overlay over the entire oem sill. i came to like the new look. i think if the black on the edges were to still show, it would look cheap and plastic-y.
that's when i realized they actually do overlay over the entire oem sill. i came to like the new look. i think if the black on the edges were to still show, it would look cheap and plastic-y.
Honestly, I was kind of like ehh a few hours ago... but I said F-it I want to see em hooked up so I went ahead and wired up the front passenger in 10mins... Soon as I turned my garage lights off I was like ahh yeah LED = sick haha
It also just then hit me... I am in the middle of modding my front bumper... why don’t I just get them blacked out!?! Yeah... that will look sick. Ill post photos next week, taking them to my buddies shop tomorrow morning I might just do them in Night Chrome… slick looking black chrome… idk have to check the color chart tomorrow.
06-14-2011, 12:49 AM
#783
Instructor
hey swoosh i got a question regarding the blue footwell lighting you have. do you have it installed to where it turns on when the doors open up? or do you have it wired to a button or switch that enables them to turn on / off?
also where did you purchase the leds ? i'm assuming its the led strips but please verify
also where did you purchase the leds ? i'm assuming its the led strips but please verify
I know your question was for "swoosh" but I have mine wired to a switch... I like them on at night. =D I was considering putting it on a auto day/night switch like the "auto headlights"
happy modding!
06-14-2011, 10:39 AM
#785
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
hey swoosh i got a question regarding the blue footwell lighting you have. do you have it installed to where it turns on when the doors open up? or do you have it wired to a button or switch that enables them to turn on / off?
also where did you purchase the leds ? i'm assuming its the led strips but please verify
also where did you purchase the leds ? i'm assuming its the led strips but please verify
1> wire them along with your door sills...so they come on when you open the door....and turn off when you close the door.....
2> wire them to fuse 32 in the foot well so they come on when you hit ignition and stay on when you drive....here you can also throw a kill switch so you can turn the lights on-off as you desire....
3> wire them to the door sills and have a switch so you can have them on when you open the door and ON when you are driving or you can turn it off using the switch....
I went route #2....i have it to the fuse #32 so they come on the minute I hit ignition....earlier I had a kill switch for em but I took that out....
The LED strips are from Walmart....i got them over 2 years back....they were $12-$15 for a 12" LED strip....i found it pretty reasonable as they came weather proof.....
06-14-2011, 10:41 AM
#786
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
I just say ur avvy TLluver and cudnt help but notice you have underbody neon's....I had an underbody kit which I loved for 3 months LOL....but then i saw a civic ricer with a fart can and the same LED kit....i drove home and took the kit off immediately....guess you still have to meet your ricer LOL....
but yeah I absolutely loved it while I had it....
but yeah I absolutely loved it while I had it....
The following users liked this post:
OnefastTL448 (06-16-2011)
06-14-2011, 10:56 AM
#787
On the pedals just started taking orders plenty of sets for sale, As far as the door sills still a few left on each color so at the moment we have everything you need.
Thanks
D
Thanks
D
06-14-2011, 11:38 AM
#788
so you can do 3 things....
1> wire them along with your door sills...so they come on when you open the door....and turn off when you close the door.....
2> wire them to fuse 32 in the foot well so they come on when you hit ignition and stay on when you drive....here you can also throw a kill switch so you can turn the lights on-off as you desire....
3> wire them to the door sills and have a switch so you can have them on when you open the door and ON when you are driving or you can turn it off using the switch....
I went route #2....i have it to the fuse #32 so they come on the minute I hit ignition....earlier I had a kill switch for em but I took that out....
The LED strips are from Walmart....i got them over 2 years back....they were $12-$15 for a 12" LED strip....i found it pretty reasonable as they came weather proof.....
I thought I had read that thread too....cant find it thow
1> wire them along with your door sills...so they come on when you open the door....and turn off when you close the door.....
2> wire them to fuse 32 in the foot well so they come on when you hit ignition and stay on when you drive....here you can also throw a kill switch so you can turn the lights on-off as you desire....
3> wire them to the door sills and have a switch so you can have them on when you open the door and ON when you are driving or you can turn it off using the switch....
I went route #2....i have it to the fuse #32 so they come on the minute I hit ignition....earlier I had a kill switch for em but I took that out....
The LED strips are from Walmart....i got them over 2 years back....they were $12-$15 for a 12" LED strip....i found it pretty reasonable as they came weather proof.....
I thought I had read that thread too....cant find it thow
My Contrubution:
I went with route 4....I wired them to turn on with my parking lights, but I also have a switch that I can turn them on or off. Since I never turn off my parking lights, and they shut off when I lock the car, I have them on as soon as I open the door, and all the time when I am driving. I ended up wiring them to the little light in your center consol. It is switched power that turns on with your parking lights. I then installed a little Blue LED switch right next to the light in the event I need to turn them off.
My main reason for this was so I could wire my back seats as well. Everything is spliced together and tied into my switch. I ran the wire from the consol under the carpet in between the two back seats. Quick disconnect and velcro hold all of mine together so when I removed the back seats and work under my steering wheel I can unhook and reinstall quickly and with ease!
Bought them from here....LED strips, Wire, and a Blue LED button
http://www.oznium.com/led-flex-strips
Last edited by lucnex; 06-14-2011 at 11:41 AM.
06-16-2011, 01:54 PM
#791
Keep your pics coming if anybody needs anything just let me know everything has been shipped. Pedals will be here in about 2 weeks spread the word if you know anybody looking for a set. 99.99 Delivered.
06-16-2011, 02:08 PM
#792
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
MODS: can you please update the thread title to say something about the pedals....
Supercomputers....do you want to start a list of just have people send you the $$$
Supercomputers....do you want to start a list of just have people send you the $$$
06-16-2011, 02:35 PM
#793
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
So I created a new thread for the pedals:
https://acurazine.com/forums/3g-tl-2004-2008-93/supercomputer-pedals-original-versions-back-last-few-sets-left-hurry-823014/#post13026580
People put yourself on the list....
https://acurazine.com/forums/3g-tl-2004-2008-93/supercomputer-pedals-original-versions-back-last-few-sets-left-hurry-823014/#post13026580
People put yourself on the list....
06-17-2011, 12:10 PM
#796
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
205 shipped to US
225 shipped to Canada....
Paypal ID is allarndproducts@yahoo.com
Include the color you want when you order (RED/WHITE/BLUE)
225 shipped to Canada....
Paypal ID is allarndproducts@yahoo.com
Include the color you want when you order
(RED/WHITE/BLUE)
06-19-2011, 09:20 PM
#798
Intermediate
Join Date: Mar 2010
Location: Bronx...NY
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
I was going to install these this yesterday but plugged in all of the black clips to the harness to test them out by connecting them to the battery. One of the rear sills does not light up at all. I tried switching the connection, but still nothing at all. Any ideas? I really want to install these already.
06-20-2011, 10:14 AM
#799
takin care of Business in
Thread Starter
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
take the rear sill directly to the battery and see if it works....if it does then you didnt splice the wire correctly or the correct wire.....and if it doesnt that means something to do with the sill
Contact super and he will help you out....
Contact super and he will help you out....