before i get flamed for asking a question that was probally asked before i search on google by typing front sidemarker removal 3g tl acurazine and nothing poped up but the rear which i already replaced. i trying to find either the scan or picture thead were it shows me how to remove.i read how supposely you can pop them out from the outside by using a flathead but i rather not since it might brake or i might scratch my paint. can any one help with a thread link or directions in how to do it thanks

 

3G TL Service Dept./Garage Ref#G-064: https://acurazine.com/forums/3g-tl-2004-2008-93/diy-modifying-front-side-marker-lights-3g-garage-ref-g-064-a-572135/.

 

i can remove mine in 1 min. remove 4 screws on fender liner, peel back and reach your hand in fender and pop the sidemarker out.

 

Don't be scurrred...just pop it out.

 

through the fenderliner you go!

 

My persistence has paid off

OP, going through the fenderliner is super easy. Just take your time and do it right

 

the only logical way to remove them would be through the fenders.


OP was right; I'd be scared to take a screwdriver to my paint!

 

thanks guys ill try doing it once it stops raining this thread can be deleted since i got my answer already

 

Google is definately a good way to search the site. The 3G Service Department is also a good way to find useful info.

Thanks Will.

 

Its call a panel tool and OP can pick one up at any auto part stores

 

I already chAnged them thanks it was pretty easy after all

 

Finishing results

 

looks stock.

 

not for the 04 the rears come red and the front a little clear these are smoked

 

Any pictures of them without the lights on?

 

Looks good. I am switching to the USR ones also due to one of my custom fronts finally dying on me. I can pop mine out in a few seconds since my fender liner is not even screwed in lol